No description available.

Collaborative beamforming is a powerful technique to increase communication energy efficiency and range in an energy-constrained network. To achieve high performance, collaborative beamforming requires accurate knowledge of channel state information (CSI) at the transmitters (collaborative nodes). In practice, however, such exact knowledge of CSI is not available. A robust transmitter design based on partial CSI is required to mitigate the effects of CSI mismatches. / This thesis focuses on the design and evaluation of a beamforming scheme that is robust to CSI mismatches for collaborative multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) wireless systems. Using a max-min robust design approach, the robust beamformer is designed to maximize the minimum (worst-case) received signal-to-noise ratio (SNR) within a predefined uncertainty region at each OFDM subcarrier. In addition, several subcarrier power allocation strategies are investigated to further improve the robustness of collaborative systems. Numerical simulation results show that the robust beamformer offers improved performance over the nonrobust beamformers and the use of power allocation strategies among subcarriers further improves the system performance.

Thesis (M.S.)--University of Hawaii at Manoa, 2006. / Includes bibliographical references (leaves 94-96). / xv, 96 leaves, bound ill. 29 cm

No description available.

Achieving acceptable plane wave uniformity throughout an expanded volume is necessary to conduct scattering measurements on a large target in a controlled environment. An expanded volume is large relative to the size of the nearfield array configuration used to produce plane wave uniformity. The optimum set of shading coefficients for a nearfield array may not produce acceptable plane wave uniformity as the volume and frequency domain are expanded for a given array configuration. Choosing the frequency domain as a single frequency for an optimum set of coefficients will produce plane wave uniformity throughout the largest possible volume for a given array configuration. This study determines the acceptability of uniformity results produced by an optimum set of frequency dependent coefficients throughout an expanded volume for two array configurations that comprise a system for measuring bistatic target strength in the nearfield. Minimizing the frequency domain chosen for an optimum set of coefficients will produce plane wave uniformity for the largest possible volume for a given array configuration. This study determines the acceptability of uniformity results produced by an optimum set of frequency dependent coefficients throughout an optimistic volume for two array configurations that comprise a bi-static array.