Thèse (M.Eng.) -- Université du Québec à Chicoutimi, 2006. / La p. de t. porte en outre: Mémoire présenté à l'Université du Québec à Chicoutimi comme exigence partielle de la maîtrise en ingénierie. CaQCU Bibliogr.: f. 201-202. Document électronique également accessible en format PDF. CaQCU

Published also as Thesis (Ph. D.)--Columbia University, 1927. / Bibliography: p. 274-275.

Thesis (Ph. D.)--University of Notre Dame, 1942. / "Lithoprinted." "List of sources and references": p. 82-86.

A study or the possibility of a modern mining operation in the Valley Coal Fields of Virginia begins with a brief history of previous mining operations in the area. Following this is a study of the geological occurrence and a geographical description of the site selected. The deposit is studied from various angles - physical characteristics of the seam in place, chemical characteristics and washability are all included. After the amount and type of impurities present in the deposit are ascertained, a coal preparation plant is proposed to clean the coal to the desired level. Leaving the surface problems, the underground problems of hoisting, mining methods, ventilation, haulage and drainage, and power are taken up separately and a solution recommended for each problem. To operate the mine an organization is designed to fit the solution of the various problems. The estimate of the cost of equipping and providing the labor and supervision to operate such a mine is included in the study. This cost is compared with the expected income. / Master of Science

Thesis (Ph. D.)--University of Alabama at Birmingham, 2008. / Additional advisors: Robert A. Angus, Joe J. Gauthier, Jason T. Kirby, Robert W. Peters. Description based on contents viewed June 12, 2008; title from title screen. Includes bibliographical references (p. 85-87).

Teve como objetivo verificar e comparar a alteração das características do carvão antracitoso e do carvão betuminoso utilizados em meio filtrante, devido ao efeito abrasivo causado entre os grãos decorrentes de lavagens exclusivamente com água e lavagens independentes com ar e água. Foram estudados dois tipos de carvão antracitoso e um tipo de carvão betuminoso, para os quais foram determinadas suas características químicas e físicas. Os ensaios foram realizados em uma instalação ao piloto montada na escola de engenharia de São Carlos-EESC, USP, na qual foram feitas simulações de lavagens admitindo-se uma lavagem diária durante um ano para cada método, de modo intermitente, em que o meio granular era compactado ao final de cada lavagem, e continuo, sem compactação do meio granular. A velocidade ascensional utilizada para cada simulação de lavagem foi de 0,9 m/min, promovendo expansão no meio granular de 35 a 40%. A taxa de ar utilizada para as simulações de lavagens com aplicação de ar foi de 15 l/sm2. Após o término das 365 lavagens, foram determinados os valores médios do coeficiente de esfericidade e da porosidade do meio granular estratificado e construída a curva de distribuição granulométrica das amostras utilizadas nos ensaios. Conclui-se que o carvão betuminoso apresentou comportamento semelhante ao dos carvões antracitosos e que a metodologia de lavagem continua produz praticamente o mesmo efeito abrasivo comparada a de lavagem intermitente. / This work had the objetive to verify and to compare the alterations on the properties of Anthracite coal and Betuminous coal, due to the abrasive effect caused between the grains resulted from washing exclusively with water and independent washing with air and water. There were studied two types of Anthracite coal and one type of Betuminous coal, their chemical and physical properties were determined. The tests were performed at a pilot instalation setted at the School of Engineering of São Carlos - EESC,USP; where, were done simulations of washing, it was admitted one washing a day during one year (365 washing) for each method, in an intermitent way, in which the granular medium was compacted at the end of each washing, and continous without compactation of the granular medium. The ascending speed used for each simulation of washing was 0,9 m/min, promoting an expansion in the granular medium of 35 to 40%. The rate of air used for the simulations of washing with the aplication of air was 15 I/sm2. After the last of the 365 washing, were determined the average values of the coefficient of sphericity and porosity of the granular estratified medium and was constructed a curve of the granulometric distribution of the samples used during the tests. It was conclued that Betuminous coal shows similar behaviour as Anthracite coaI and the continous method produce the same effect abrasive compared intermitent method.

Mémoire (M.Eng.)--Université du Québec à Chicoutmi, 1998. / Document électronique également accessible en format PDF. CaQCU

Thesis (Ph. D.)--Catholic University of America, 1931. / "Biographical note." Bibliography: p. 195-199.

Teve como objetivo verificar e comparar a alteração das características do carvão antracitoso e do carvão betuminoso utilizados em meio filtrante, devido ao efeito abrasivo causado entre os grãos decorrentes de lavagens exclusivamente com água e lavagens independentes com ar e água. Foram estudados dois tipos de carvão antracitoso e um tipo de carvão betuminoso, para os quais foram determinadas suas características químicas e físicas. Os ensaios foram realizados em uma instalação ao piloto montada na escola de engenharia de São Carlos-EESC, USP, na qual foram feitas simulações de lavagens admitindo-se uma lavagem diária durante um ano para cada método, de modo intermitente, em que o meio granular era compactado ao final de cada lavagem, e continuo, sem compactação do meio granular. A velocidade ascensional utilizada para cada simulação de lavagem foi de 0,9 m/min, promovendo expansão no meio granular de 35 a 40%. A taxa de ar utilizada para as simulações de lavagens com aplicação de ar foi de 15 l/sm2. Após o término das 365 lavagens, foram determinados os valores médios do coeficiente de esfericidade e da porosidade do meio granular estratificado e construída a curva de distribuição granulométrica das amostras utilizadas nos ensaios. Conclui-se que o carvão betuminoso apresentou comportamento semelhante ao dos carvões antracitosos e que a metodologia de lavagem continua produz praticamente o mesmo efeito abrasivo comparada a de lavagem intermitente. / This work had the objetive to verify and to compare the alterations on the properties of Anthracite coal and Betuminous coal, due to the abrasive effect caused between the grains resulted from washing exclusively with water and independent washing with air and water. There were studied two types of Anthracite coal and one type of Betuminous coal, their chemical and physical properties were determined. The tests were performed at a pilot instalation setted at the School of Engineering of São Carlos - EESC,USP; where, were done simulations of washing, it was admitted one washing a day during one year (365 washing) for each method, in an intermitent way, in which the granular medium was compacted at the end of each washing, and continous without compactation of the granular medium. The ascending speed used for each simulation of washing was 0,9 m/min, promoting an expansion in the granular medium of 35 to 40%. The rate of air used for the simulations of washing with the aplication of air was 15 I/sm2. After the last of the 365 washing, were determined the average values of the coefficient of sphericity and porosity of the granular estratified medium and was constructed a curve of the granulometric distribution of the samples used during the tests. It was conclued that Betuminous coal shows similar behaviour as Anthracite coaI and the continous method produce the same effect abrasive compared intermitent method.

One or the characteristics of all anthracite coal, with its low volatile content, is its ability to burn completely in a small volume. Another characteristic and disadvantage of local, semi-anthracite coal is its high ash content. It is the authors' belief that local, semi-anthracite coal can be burned most effectively for domestic heating if the furnace design allows for these characteristics. With these facts in mind, it was decided that the Anthratube had excellent possibilities as a domestic unit for burning local coal. The Anthratube, by its compactness, takes full advantage of the first characteristic; with its ash-removing grate, it overcomes to a great extent the disadvantage of the second characteristic. The purpose of this thesis was, then, to determine whether or not various sizes of local, semi-anthracite coal from the Merrimac seam could be successfully burned in the Anthratube. The coal used for this investigation was obtained from the Great Valley Anthracite Corporation located at McCoy, Virginia. 1. Pea size, local coal can be burned very successfully in the Anthratube. Overall boiler efficiencies of the unit with this size coal are high over a wide range of loads. Of the sizes of coal burned, pea size is most suitable for the Anthratube. 2. Buckwheat size, local coal canoe burned in the Anthratube with good results. The overall boiler efficiencies obtained with this size of coal are good, although not as high as those obtained with the pea coal. 3. The performance of the Anthratube with rice size, local coal is inferior to that achieved with pea and buckwheat sizes. The output of the unit is seriously limited when using this size. 4. Culm size, local coal cannot be burned in the Anthratube. / M.S.