This Thesis deals with the organization of realization of the residential building A1 Slavkov u Brna. Thesis solves mainly technological process of realization of the main object. The thesis aims to develop a time schedule of execution, usage of mechanisms timetable, material resources, technological regulations, inspection and test plans. The annex also solved graphically construction site facility set up and its modifications during execution depending on different type of works. This Thesis is based on realization project provided by the realization company and with consent of project designer.

The aim of my master’s thesis is a project of a new apartment building at a level of the documentation for the structure realization. The thesis contains text, drawings and calculation part. The house is designed as a detached house. Residential house is situated in flat terrain. The building is full basement with four above-ground floor. The house has 16 housing units. The construction system is a combined brick. The structural system of the basement part is made up of permanent shuttering. The floors are of brick blocks HELUZ. In the middle of the building is constructed elevator. The ceiling structure is made of prefabricated prestressed panels Spiroll. The roof consists of single-layer flat roof. The thesis also includes thermal and technical expertise and the calculation of the foundation structure.

Subject of this diploma thesis is desing dokumentation of apartment house. Documentation contains all requisites according to valid regulations. House is designed as detached basement house with one underground floor and five aboveground floors. Object is based on reinforced concrete foundation pads. House is roofed with a flat roof. House contains 18 dwelling units with balconies or terraces. In object is solved parking in underground floor. Vertical load-bearing structure is made of clay blocks. Floors are made of cast-in-place reinforced concrete. Underground floor load-bearing structure is reinforced concrete frame. House is insulated with contact thermal insulation. Mechanical resistence and stability, health protection, healthy live conditions and enviroment, fire security, safety in use of building, energy savings and thermal protection is ensured.

"The compact forms of housing" is a term with which the Czech interior design yet do not often occur. This concept densely built low-rise residential files yet carries a strong potential not only in matters of mere living, but also offers one of the progressive alternative ways of living environment in general. Examined form of residential buildings is becoming increasingly important especially in specific situations where conventional housing is failing and instead generates other social problems. This thesis is primarily seeking the maximum extent available to document the issue of a compact housing, describe its basic form and point out the historical roots of this typology. The acquired knowledge was then subjected to an in-depth analysis, the output of which is to be the most comprehensive characterization researched the topic and its inclusion in the context of the standard forms of housing. The result is a set of research information, assumptions and typological bases that determine the primary urban, architectural, or social limits of the residential category. This work attempts to take into account the specified topic in the broader context of housing as a basic human need. As a result of findings would be its contribution to the culture scene in our home and create a theoretical material that would become an essential information base for creating compact residential files. The conclusions of this research can be further developed, tested and refined in the educational process at the faculties of architecture or in the practice. The results of research could stimulate interest in this type of housing and contribute to the enrichment of Czech housing scene of a synthetic form, which will form the connecting link between the typological family house and an apartment building. Low-rise housing complexes with a high population density can also create an effective counterbalance to the typical suburban development of part-time family home and offer method, respectively one of the alternative ways to be with this dilapidated urban housing estate deal.

The subject of the diploma thesis is to elaborate the design documentation of an apartment house with restaurant. The building is designed in the village of Lipůvka, South-Moravian region, on plot No.: 544/1 and 545/1 – cadastral region Lipůvka. The bulit-up area is 443,3 m2. There are four floors. There is restaurant, one housing unit (for persons with reduced mobility) and utility room in first above-ground floor. Second, third and fourth above-ground floor is for housing. Each of these three floors has three apartments – two apartments 3+k, one apartment 3+1. Entrance to every apartment is from main staircase. The building is based on the foundation walls of concrete C20/25, all vertical walls are from Porotherm System. Celings are composed of ceramic-conrete beams POT, ceramic insertion Miako and concrete. The staircase is monolithic reinforced concrete. The building is without basement, roofed by a warm flat roof.

This thesis is focused on selected parts of building technological project of apartment house Novostrašnická in Prague. The project contained technical report, coordinating situation with distinguished traffic routes, object-oriented time and financial plan, study of essential technological phases, report of building equipment and drawing of building equipment for different phases, the design of mechanical arrangement, the work schedule for fabric, plan for securing material resources, technological prescript and control trial plan for drilled piles, budget and design of lifting mechanisms.

The thesis focuses on urban and constructional development of the city České Budějovice both from the historical point of view as well as from the perspective of the development of structural elements of buildings. The thesis dividend into two parts. The theoretical part describes the basic terminology, historical events establishing České Budějovice and formativ of individual city districts. It also contains relevant maps. The second one, application part deals with the development and changes of buildings during different time periods. Development of construction is divided into four time periods (until 1918, 1918-1948, 1948-1993 and from 1993 to the present). In each time period the historical development, constructional solutions and architectural design of buildings are descibed and specific examples of buildings and locations are given. This part of the thesis also deals with possible future development of residential areas considering the spatial plan and limits of development. The aim of the thesis is to compile an overview of historical development and constructional elements of buildings in the selected area from the beginning of the construction of the site to present and outline a possible future development of the city.

The aim of my diploma thesis is to propose the best possibility of selling the apartment house and to elaborate variants of selling the apartment house as the unit and selling of the separate flats. The theoretical part of the diploma thesis defines the basic terms and definitions, methods used for the appraisal and bank loans are specified. The practical part is about the application of the methodical basis from the appraisal according to the price provision. The recent and future value is specified here by the means of the methods of costs appraisal, the income method and the comparative method and the price common for the credit proceeding is provided.

The thesis contains selected parts of building technology project for the construction of residential house in Prague, section Palmovka. The goal is building a technology solution entered the building on the basis of technical documents supplied by the designer. This work includes technical report on construction technology project, time and financial object plan, schedule substructure using a computer program Contec, study the implementation of major technological stages of the main building, including diagrams of the construction process, the project site equipment, design of the main mechanisms, inspection and test plan with technological instruction for earthwork and foundation of the building, the maintenance plan.

This thesis is focused on selected parts of building technological project apartment house Videnska in Brno concretly for lap C1 and C2. The project contained technical report, coordinating situation with distinguished trafic routes, object time plan and financial plan, study of main technological lap, technical report of building equipment and drawing of building equipment for differents lap, the design of mechanical arrangement of machine, the work schedule for construction, plan for securing material resources for monolithic ceiling, technological prescript and control trail plan for monolithic cailing, budget and design of lifting mechanisms