No description available.

The aim of the diploma thesis is to verify and compare the properties of bituminous stone mastic asphalt, namely SMA 11S with modified PMB 45 / 80-55 asphalt binder or 50/70 road bitumen binder with rubber granulate. Comparison of properties is performed using functional tests. The thesis is divided into the theoretical and practical part. The theoretical part deals with the familiarization with the use of the SMA mixture, the selected concepts concerning recycling of non-leveled roads are described and described. Attention is paid especially to the recycling of roads in the Czech Republic with an emphasis on hot recycling on the incinerator, which allows increased dosing of Reclaimed Asphalt into asphalt mixtures. In the practical part, the results of the functional tests of the SMA 11S mixture, which have been taken from the test section, are processed and evaluated.

The diploma thesis deals with the production of warm mix asphalts, using the foam bitumen technology. The thesis is divided into theoretical and practical part. The theoretical part is focused on the basic division of roadway constructions, particularly on warm mix asphalts. The aim of the practical part was to find out whether the produced asphalt mixture retains its functional properties when the operating temperature is reduced. For this purpose, two asphalt mixtures of the ACO 11+ type at operating temperature of 150 °C and reduced operating temperature of 130 °C were made. Functional tests and empirical and functional tests were carried out on the produced asphalt mixtures and the extracted bitumen binders respectively. In the conclusion of the thesis, the results of the tests are mutually compared.

The diploma thesis is divided into theoretical and practical part. The theoretical part is mainly focused on methods for reducing the working temperature in the production of hot mix asphalt and the main reasons for this. Most attention is paid to the warm mix asphalt, mainly foam asphalt technology. In practical part are describes working procedures of individual tests on asphalt mixtures and recovered bitumen binders. The tests were performed on 3 types of ACO 11+, one was made with working temperature 160°C without foamed bitumen and the other two with foamed bitumen,one with working temperature 160°C and the second 140°C. Then were the results compared.

The Master’s thesis is focused on low-noise asphalt mixtures in general, namely asphalt concrete for very thin layers with low noise (BBTM 8 NH) and stone mastic asphalt with low noise (SMA 8 NH). The first half of the thesis describes basic types of asphalt mixtures with low noise, requirements for raw materials (aggregates and asphalt), noise emissions and their measurement methods. The second part deals the design of BBTM 8 NH and SMA 8 NH so that they have the same voids. Subsequently, their parameters were tested. Acoustic absorption, resistence against permanent deformation and stiffness. Test methods are described and evaluated.

Diploma thesis deals with adding R - material to the wearing asphalt courses, specifically to the SMA 11S. It has two parts – theoretical and practical. The theoretical part describes using R - material in the recycling of roads, different types of recycling and how is this problem handled in the Czech Republic, the practical part deals with the design of three kinds of asphalt mixtures with different added ratios of R – material, describing empirical and functional tests on the bitumen binder and the designed asphalt mixtures and the results of those tests.

This diploma thesis deals with the designs of asphalt mixtures for the wearing asphalt courses, specifically for the SMA 11S with an added 30 % and 50 % RAP (reclaimed asphalt pavement), this material was reclaimed from the wearing asphalt course type SMA. The thesis is divided into two parts. The first part is theoretical and it deals with the recycling of asphalt roads and adding RAP to the new asphalt mixures for the roads. The second part is practical. It deals with the design itself. Two types of SMA were designed, first with a 30 % RAP and second with a 50 % RAP. In those mixtures functional tests of asphalt mixtures were made.The results were compared to the asphalt mixture with 0 % of RAP and with the mixture with 30 % of RAP reclaimed from the wearing, binder and base course together. The results are summed up in the conclusion.

Aim of this thesis is the usage of the open-graded asphalt concrete filled with a special cement grout in the road structures. Thesis defines the main concrete properties and explains related legislation and norms that apply. In addition, laboratory design of asfalt mixtures and a tree kind mortal filler and possibilities of mortal filler pigmentation are dealth with. Finally, thesis evaluates the results from various laboratory tests that were performed on the specimens made from final mixtures.

[pt] O trincamento de camada de mistura asfáltica é o principal tipo de deterioração das rodovias, e o presente estudo pretende contribuir para conhecimento dos processos de fissuramento com o objetivo de incorporar novos parâmetros mecânicos para melhorar projetos de pavimentação rodoviária . A modelagem computacional através do Método dos Elementos Discretos (MED), permitiu fazer uma simulação da iniciação e da propagação do trincamento em um ensaio de tração direta chamado de Disco Circular com Fenda (Disk Shaped compact), considerando uma abordagem da teoria da mecânica da fratura elástica linear (MFEL) e a incorporação do modelo constitutivo de zona coesiva (MZC). As modelagens realizadas permitiram inferir o comportamento de corpos de prova de Disco Circular com Fenda DC(T) feitos em laboratório. O método dos elementos discretos monstrou-se uma ferramenta apropriada para realizar este tipo de simulação. Também foram feitas análises da sensibilidade da resposta do modelo em relação a diversos parâmetros mecânicos do material: módulo de Young (E), resistência à tração (RT) e energia da fratura (Gf). Este último parâmetro foi obtido da área sob a curva tração-deslocamento da abertura da boca da trinca (CMOD). A análise foi realizada considerando o corpo como material homogêneo atribuindo-se a todas as partículas propriedades idênticas. A modelagem numérica 2D foi executada através do programa comercial PFC2D baseado no MED. / [en] The cracking of asphalt mixture layers is the main type of deterioration of roads in Brazil, and this study aims to contribute to improve the knowledge of cracking processes in order to incorporate new mechanical parameters into road pavement projects. Computer modeling by the Discrete Element Method (DEM), permitted the simulation of the initiation and the propagation of cracking in a tensile test called Direct Circular Slotted Disc (Disk Shaped Compact), whose interpretation is based on the theory of linear elastic fracture mechanics and considering an specific elastoplastic model known as the cohesive zone model (CZM). Results of Direct Circular Slotted Disc tests were obtained in laboratory and interpreted by numerical simulations using the discrete element method, with good results. The sensitivity of model response with respect to various mechanical parameters, such as the Young s modulus (E), the tensile strength (RT) and the fracture energy (Gf) was also analyzed. This last parameter (Gf) was obtained considering the area under the traction-displacement curve from the Crack Mouth Opening Displacement (CMOD) test. The analyses were carried out considering the body as a homogeneous material, assigning to all particles identical properties. The 2D numerical model was analyzed using the commercial software PFC2D based on the discrete element method (MED).