Liquid crystalline materials forming columnar mesophases are of importance for both the fundamental research and technological applications due to their supramolecular architecture allowing for one-dimensional charge transport. The potential applications of these materials include light emitting diodes, solar cells, field effect transistors and photovoltaic cells. However, to design a LC material suitable for a particular application, a fundamental understanding of the structure-property relationships is needed.<p>In the present thesis, a variety of systems forming columnar mesophases have been explored. They include small molecular weight compounds (triphenylene, phthalocyanine derivatives and star-shaped mesogens) and polymer materials. The research was focused on the study of the influence of the molecular architecture and specific interactions such as hydrogen bonding on the supramolecular organization in the mesophase, as well as on the influence of columnar mesophase on crystal growth. The main results of the thesis are summarized below.<p>The influence of hydrogen bonding on the structure and charge carrier mobility was investigated for a triphenylene derivative, hexaazatriphenylene, having lateral alkyl chains linked to the core via amide groups. These linking groups provide the possibility to form inter- and intra-molecular hydrogen bonds. Acting as “clamps”, the inter-molecular hydrogen bonds are found to enforce the attractive interactions between the molecules in the column. Thus, the columnar mesophase formed by this system is characterized by the smallest inter-disk distance ever found in columnar mesophases (3.18 Å). The improved intra-columnar order brings about a higher charge carrier mobility (0.02 cm2/Vs) as compared to other triphenylene derivatives without hydrogen bonds. <p>Phthalocyanine derivatives, which are liquid crystalline at ambient temperature, could be suitable for opto-electronic applications due to their improved processibility and self-healing of structural defects. Our interest in these systems was inspired by the fact that, in spite of numerous studies performed to date, only very a few phthalocyanine derivatives were found to exhibit columnar mesophases at ambient temperature. We observed that by introducing branches in alkyl chains close to the core, we were able to render the material LC at ambient temperature. Analysis of X-ray diffraction patterns measured on oriented samples showed that these systems form hexagonal and rectangular ordered columnar mesophases. This finding is in contradiction with the general view stating that non-hexagonal mesophases can be only disordered. Since the absolute majority of applications require fabrication of films, it was very important to achieve the visualization of the organization of the phthalocyanine derivatives at the nanometer scale. AFM images on thick spin-coated films with columnar resolution are presented for the first time. They allowed the examination of columnar curvatures and breaks at the boundaries between different single crystal-like domains. <p>The possibility of templating columnar crystal growth was studied for a star-shaped mesogen using a combination of direct- and reciprocal-space techniques. AFM images with columnar resolution showed that the crystal growth initiated in the monotropic columnar mesophase occurs almost in register with the mesomorphic template. In the final crystalline structure, the placement of the crystalline columns is controlled by the mesomorphic tracks at the scale of an individual column, i.e. at the scale of approximately 3.5 nm. <p>The mesophase-assisted crystallization was also studied for the case of a polymer material forming columnar mesophase, poly(di-n-propylsiloxane). X-ray diffraction on oriented fibers allowed us to correct the previous indexation and solve the structure of the unit cell. The crystallization process was studied on samples crystallized in different conditions. It was found that, depending on crystallization conditions, both folded-chain and extended-chain crystals can be obtained. Thus, crystallization of the material from the mesophase results in the formation of 100-150nm thick crystals, which corresponds to a nearly extended-chain conformation. By contrast, when crystallized from a dilute solution, folded-chain crystals result. The mechanisms of chain unfolding was studied by variable temperature atomic force microscopy on PDPS single crystals. It was found that crystals rapidly thicken above the initial melting point, up to 80 nm. / Doctorat en sciences, Spécialisation physique / info:eu-repo/semantics/nonPublished

La microscopie à force atomique (AFM) permet de visualiser la topographie d’échantillons organiqueset inorganiques à l’échelle atomique. Les innovations les plus récentes offrent désormais la possibilitéd’accéder aux propriétés nano-mécaniques des échantillons (élasticité, adhésion…). Son panel defonctionnalités permet de pallier aux besoins des nanotechnologies, tant dans les domaines de laphysique, de la chimie que de la biologie.Cependant, les besoins nécessaires à la compréhension des processus biologiques imposent aumicroscope à force atomique des vitesses d’acquisitions rapides, inférieures à la seconde par image. Leséquipements classiques n’offrent pas cette possibilité. C’est pour s’affranchir de ce verrou technologique,pour l’étude dynamique, qu’un prototype de microscope à force atomique à haute-vitesse a étédéveloppé (HS-AFM) en partenariat avec l’équipe du Professeur T. Ando à l’Université de Kanazawa(Japon). Il permet d’atteindre des vitesses de balayage identiques aux vitesses vidéos : 25-50 images/s, enmilieu liquide. Le dispositif est en perpétuelle amélioration : nouvelle boucle d’asservissement, domainesde balayage augmentés. La haute résolution est, quant à elle, assurée par des leviers miniaturisés munisde sur-pointes en carbone. Parallèlement à l’innovation du microscope en lui-même, des modulescomplémentaires ont été développés : module pousse seringue et module chauffant.Le potentiel de ce prototype, développé dans le cadre d’un programme ANR PNANO 2008 HSnanobio-Imaging, a été montré via l’étude d’une petite protéine de choc thermique : la protéine sHspLo18. Cette protéine, issue de la bactérie lactique Oenococcus oeni, offrait la possibilité d’étudier deschangements de degrés d’oligomérisation en fonction du pH, ainsi que le rôle chaperon et lipochaperonen cas de stress environnemental d’autres complexes biologiques. L’utilisation des techniques demicroscopie couplée à des études biochimiques sur ce modèle protéique a permis d’appréhender l’effetdes surfaces sur l’adsorption et la dynamique des complexes biologiques. L’interaction protéine – surfacea pu être approchée et s’avère utile au développement des capteurs à protéines / The atomic force microscopy (AFM) gives access to the topography of organic and inorganic samplesat the atomic scale. The latest innovations offer the possiblity to understand the sample nano-mechanicalproperties (elasticity, adhesion...). Its feature set allows overcoming the demands of nanotechnology,both in the fields of physics, chemistry and biology.However, understanding biological processes require faster acquisitions for the atomic forcemicroscopy, less than a second per frame. As conventional equipment does not offer the possibility toovercome the constraint of time for dynamical studies, a prototype of high-speed atomic forcemicroscope (HS-AFM) was developed in partnership with Professor T. Ando group of Kanazawa University(Japan). It can reach scanning video speed: 25-50 frames/s in a liquid medium. The device is beingconstantly improved: new feedback control, larger scanning sizes. The resolution is provided byminiaturized cantilevers with carbon EBD-tips. In parallel to innovative modules on the microscope, addonshave been developed: syringe pump and heating modules.The potential of the prototype, developed within the framework of the program ANR PNANO 2008HS-nanobio-Imaging, has been shown through the study of a small heat shock protein: the protein sHspLo18. This protein, from the lactic acid bacterium Oenococcus oeni, offered the possibility of a variouschanges of oligomerization degrees according to the pH, and also the chaperone and lipochaperon activityof protein under the influence of an environmental stress. The use of these techniques of microscopiescoupled with biochemical studies on this proteic model allowed to dread the effect of surfaces on theadsorption and the dynamics of biological complexes. The interaction protein – surface coulb be toapprehend and proves to be useful for the development of protein sensors developed in the laboratory

Indiana University-Purdue University Indianapolis (IUPUI) / Osteogenesis imperfecta is a rare congenital disease commonly characterized by brittle bones caused by mutations in the genes encoding Type I collagen, the single most abundant protein produced by the body. The murine model (oim) exists as a natural mutation of this protein, converting its heterotrimeric structure of two Col1a1 molecules and a single Col1a2 molecule into homotrimers composed of only the former. This defect impacts bone mechanical integrity, greatly weakening their structure. Femurs from male wild type (WT), heterozygous (oim/+), and homozygous (oim/oim) mice, all at 12 weeks of age, were assessed using assays at multiple length scales with minimal sample processing to ensure a near-physiological state. Atomic force microscopy (AFM) demonstrated detectable differences in the organization of collagen at the nanometer scale that may partially attribute to alterations in material and structural behavior obtained through mechanical testing and reference point indentation (RPI). Changes in geometric and chemical structure through the use of µ-Computed Tomography and Raman spectroscopy respectively indicate a smaller, brittle phenotype caused by oim. Changes within the periodic D-spacing of collagen point towards a reduced mineral nucleation site, supported by reduced mineral crystallinity, resulting in altered material and structural behavior in oim/oim mice. Multi-scale analyses of this nature offer much in assessing how molecular changes can compound to create a degraded, brittle phenotype.

Master of Science / Department of Physics / Robert Szoszkiewicz / Proteins are involved in many of the essential cellular processes, such as cell adhesion, muscle function, enzymatic activity or signaling. It has been observed that the biological function of many proteins is critically connected to their folded conformation. Thus, the studies of the process of protein folding have become one of the central questions at the intersection of biophysics and biochemistry. We propose to use the changes of the nanomechanical properties of these biomolecules as a proxy to study how the single proteins fold. In the first steps towards this goal, the work presented in this thesis is concentrated on studies of unfolding forces and pathways of one particular multidomain protein, as well as on development of the novel method to study elastic spring constant and mechanical energy dissipation factors of simple proteins and peptides. In the first part of this thesis we present the results of the mean unfolding forces of the NRR region of the Notch1 protein. Those results are obtained using force spectroscopy techniques with the atomic force microscope (AFM) on a single molecule level. We study force-induced protein unfolding patterns and relate those to the conformational transitions within the protein using available crystal structure of the Notch protein and molecular dynamics simulations. Notch is an important protein, involved in triggering leukemia and breast cancers in metazoans, i.e., animals and humans. In the second part of this thesis we develop a model to obtain quantitative measurements of the molecular stiffness and mechanical energy dissipation factors for selected simple proteins and polypeptides from the AFM force spectroscopy measurements. We have developed this model by measuring the shifts of several thermally excited resonance frequencies of atomic force microscopy cantilevers in contact with the biomolecules. Next, we provided partial experimental validation of this model using peptide films. Ultimately, our results are expected to contribute in the future to the developments of medical sciences, which are advancing at a level, where human health and disease can be traced down to molecular scale.

No description available.

No description available.

No description available.

No description available.

Many biological processes, pathogens, and pharmaceuticals act upon, cellular membranes. Accordingly, cell membrane mimics are attractive targets for biosensing, with research, pathology, and pharmacology applications. Lipid bilayers represent a versatile sensor functionalization platform providing antifouling properties, and many receptor integration options, uniquely including transmembrane proteins. Bilayer-coated sensors enable the kinetic characterization of membrane/analyte interactions. Addressed theoretically and experimentally is the self-assembly of model membranes on plasmonic sensors. Two categories of plasmonic sensors are studied in two parts. Part I aims to deposit raft-forming bilayers on planar nanoaperture arrays suitable for multiplexing and device integration. By vesicle fusion, planar bilayers are self-assembled on thiol-acid modified flame-annealed gold without the need for specific lipid head-group requirements. Identification of coexisting lipid phases is accomplished by AFM imaging and force spectroscopy mapping. These methods are successfully extended to metallic, plasmon-active nanohole arrays, nanoslit arrays and annular aperture arrays, with coexisting phases observed among the holes. Vis-NIR transmission spectra of the arrays are measured before and after deposition, indicating bilayer detection. Finally, the extraction of membrane proteins from cell cultures and incorporation into model supported bilayers is demonstrated. These natural membrane proteins potentially act as lipid-bound surface receptors. Part II aims to encapsulate in model lipid bilayers, metallic nanoparticles, which are used as probes in surface enhanced Raman spectroscopy. Three strategies of encapsulating particles, and incorporating Raman-active dyes are demonstrated, each using a different dye: malachite green, rhodamine-PE, and Tryptophan. Dye incorporation is verified by SERS and the bilayer is visualized and measured by TEM, with support from DLS and UV-Vis spectroscopy. In both parts, lipid-coated sensors are successfully fabricated and characterized. These results represent important and novel solutions to the functionalization of plasmonic surfaces with biologically relevant cell membrane mimics.

Polymer and organic electronic memory devices offer the potential for cheap, simple memories that could compete across the whole spectrum of digital memories, from low cost, low performance applications, up to universal memories capable of replacing all current market leading technologies, such as hard disc drives, random access memories and Flash memories. Polymer memory devices (PMDs) are simple, two terminal metal-insulator-metal (MIM) bistable devices that can exist in two distinct conductivity states, with each state being induced by applying different voltages across the device terminals. Currently there are many unknowns and much ambiguity concerning the working mechanisms behind many of these PMDs, which is impeding their development. This research explores some of these many unanswered questions and presents new experimental data concerning their operation. One prevalent theory for the conductivity change is based on charging and charge trapping of nanoparticles and other species contained in the PMD. The work in this research experimentally shows that gold nanoparticle charging is possible in these devices and in certain cases offers an explanation of the working mechanism. However, experimental evidence presented in this research, shows that in many reported devices the switching mechanism is more likely to be related to electrode effects, or a breakdown mechanism in the polymer layer. Gold nanoparticle charging via electrostatic force microscopy (EFM) was demonstrated, using a novel device structure involving depositing gold nanoparticles between lateral electrodes. This allowed the gold nanoparticles themselves to be imaged, rather than the nanoparticle loaded insulating films, which have previously been investigated. This method offers the advantages of being able to see the charging effects of nanoparticles without any influence from the insulating matrix and also allows charging voltages to be applied via the electrodes, permitting EFM images to capture the charging information in near real-time. Device characteristics of gold nanoparticle based PMDs are presented, and assessed for use under different scenarios. Configurations of memory devices based on metal-insulator-semiconductor (MIS) structures have also been demonstrated. Simple interface circuitry is presented which is capable of performing read, write and erase functions to multiple memory cells on a substrate. Electrical properties of polystyrene thin films in the nanometre thickness range are reported for the first time, with insulator trapped charges found to be present in comparable levels to those in silicon dioxide insulating films. The dielectric breakdown strength of the films was found to be significantly higher than bulk material testing would suggest, with a maximum dielectric strength of 4.7 MV•cm-1 found, compared with the manufacturers bulk value of 0.2 – 0.8 MV•cm-1. Conduction mechanisms in polystyrene were investigated with the dominant conduction mechanism found to be Schottky emission.