No description available.

This report, presents an analytical framework for analyzing two-branch diversity systems for a Rayleigh fading channel. In many cases the fading received at both branches (i.e. a two-antenna element system) is correlated because of the proximity of the antenna elements to each other. It is also not uncommon for a diversity system to use antennas with different patterns or polarizations, this usually results in differences in average signal-to-noise ratios at both branches depending on which element is better matched to the signal environment. As will be shown, the performance of a diversity system depends greatly on the envelope correlation, average power imbalance and the combining scheme used on both branches. An analytical expression for the probability density function of the signal-to-noise ratio at the output of a two-branch maximal ratio and selection diversity system is developed in this report. The two branches are assumed to be Rayleigh fading, correlated, as well as of unequal signal-to-noise ratios. Measurements were made in Rayleigh fading channels and compared to the analytical results. The analytical cumulative distribution functions (derived using probability distributions) were found to be within 1 dB of the measured results (statistics obtained from time combining) for both maximal ratio and selection diversity attesting to the validity of the analytic results. Also developed in this report are the exact analytical average probabilities of symbol error for coherent BPSK and coherent QPSK before and after maximal ratio combining for this environment. The diversity gain for selection, maximal ratio, and equal gain combining for the 10% probability level is presented as a function of power imbalance and correlation between branches for a two-branch Rayleigh diversity system / Master of Science

The work deals with the problematics of receiving very weak radio signals and it is focused especially on systems for low rate telemetry with carrier-subcarrier modulation. The part of this work is dedicated to calculation the link budget of typicall telemetry data transmission system between the Mars and the Earth in respect of the receiving equipment, which could be developed in the Experimental sattelites laboratory on the Institute of radio electronics BUT. The main part of this work is dedicated to developing and testing the low rate telemetry data transmission system model. The model is developed for the purpose of study the effects of AWGN and phase noise on the whole system and also on its component parts. The model has been developed and described in the way of easy parameters modification. The design for each parameter of the model is described carefully. With the developed model, the study of the effects of AWGN and phase noise on the whole system and also on its component parts has been performed.

Les formats de modulation avancés, codant l’information sur la phase, la polarisation ou plusieurs niveaux d’amplitude de la lumière reçoivent aujourd’hui un intérêt croissant. En effet, ceux-ci permettent d’atteindre une meilleure efficacité spectrale et par conséquent des débits plus élevés. Ces caractéristiques sont actuellement très recherchées dans les télécommunications pour répondre à la demande constante d’augmentation de capacité des transmissions optiques fibrées. L’essentiel du travail effectué porte sur la génération de tels signaux dans des sources photoniques monolithiques sur InP faisant appel à un concept nouveau de commutation de phases optiques préfixées avec des modulateurs électro-absorbants. Une comparaison de notre technologie intégrée avec la technologie actuelle de génération de formats de modulation avancés démontre des possibilités nouvelles de réduction de taille, de diminution de consommation énergétique et d’évolution en vitesse de modulation jusqu’à 56 GBauds. Suite à la validation, par simulations, d’architectures de transmetteurs spécifiques pour la génération de formats de modulation avancés, nous réalisons en salle blanche les circuits photoniques intégrés d’étude. Les caractérisations statiques confirment le fonctionnement de toutes les fonctions intégrées des circuits et soulignent l’efficacité de la filière technologique. Pour une première démonstration de fonctionnalité nous choisissons un transmetteur BPSK capable de générer une modulation de phase à 12,4 GB. Ce résultat démontre la plus petite source intégrée BPSK à l’heure actuelle. Un autre circuit capable de générer des formats de modulation plus complexes est aussi caractérisé / Advanced modulation formats, encoding data on the phase, polarization or multi-level intensity of the light are currently a hot topic in the telecommunication domain. By using them, high spectral efficiency and therefore higher bit rate signals could be generated. Those characteristics are really attractive for the telecommunication systems manufacturers in order to answer to the constant need of increased bandwidth in fiber optic communications. The study of advanced modulation formats generation in Photonic Integrated Circuits (PICs) based on a new concept of preset phases switching by Electro-Absorption Modulators is the main task of the current work. Compared to the actual technology used for generate advanced modulations, our choice could allow a strong reduction of the dimensions and of the energy consumption of the transmitter as well as bit rate up to 56 GB. After validating specific transmitters’ architectures by simulations, we fabricated the studied photonic integrated circuits in clean room. Through static characterizations, we verify that all integrated functions of the transmitters are working and we show the efficiency of our technological choices. Using the available equipments at the lab, we prove the validity of our concept of EAM based phase switching by using a BPSK transmitter. A 12.4 GB BPSK modulation is obtained as well as a wide open eye diagram. This result demonstrates the smallest BPSK integrated photonic source at this time. Another photonic circuit able to generate more complex modulation formats is also measured

No description available.

This thesis investigates the design and implementation of turbo codes over the GNU radio. The turbo codes is a class of iterative channel codes which demonstrates strong capability for error correction. A software defined radio (SDR) is a communication system which can implement different modulation schemes and tune to any frequency band by means of software that can control the programmable hardware. SDR utilizes the general purpose computer to perform certain signal processing techniques. We implement a turbo coding system using the Universal Software Radio Peripheral (USRP), a widely used SDR platform from Ettus. Detail configuration and performance comparison are also provided in this research.

This work is dealing with the design of intermediate part of transmitter and reciever that use digital BPSK and QPSK modulations for microwave link that works in 24 – 26 GHz bands. Besides choosing the suitable modulator and demodulator there was need to provide proper connection of this part with transceiver Nortel CTR26-01M. Input and output of this intermediate part was take out to baseband, where was need to ensure the transfer of diferential inputs of modulator and demodulator to symetric leading for reason of data communication with PC, for which was created the algorithms to provide transmitting and receiving data. Complete structure controlled by the microcontroller has been enliven and furthemore there was created the measurement of chosen parameteres.

A passive wireless surface acoustic wave sensor of a delay-line type is composed of an antenna, a transducer that converts the EM signal into a surface acoustic wave, and a set of acoustic reflectors that reflect the incoming signal back out through the antenna. A cavity forms between the transducer and the reflectors, trapping energy and causing multiple unwanted echoes. The work in this dissertation aims to reduce the unwanted echoes so that only the main transit signal is left--the signal of interest with sensor information. The contributions of this dissertation include reflective delay-line device response in the form of an infinite impulse response (IIR) filter. This may be used in the future to subtract out unwanted echoes via post-processing. However, this dissertation will use a physical approach to echo suppression by using a unidirectional transducer. Thus a unidirectional transducer is used and also optimized for 3rd harmonic operation. Both the directionality and the coupling of the 3rd harmonic optimized SPUDT are improved over a standard electrode width controlled (EWC) SPUDT. New type of reflectors for the reflective delay-line device are also presented. These use BPSK type coding, similar to that of the Walsh-Hadamard codes. Two types are presented, variable reflectivity and variable chip-lengths. The COM model is used to simulate devices and compare the predicted echo suppression level to that of fabricated devices. Finally, a device is mounted on a tunable antenna and the echo is suppressed on a wireless operating device.

Capacity improvement of Wireless Communication Systems is a very important area of current research. The goal is to increase the number of users supported by the system per unit bandwidth allotted. One important way of achieving this improvement is to use multiple antennas backed by intelligent signal processing. In this thesis, we present methods for blind separation of co-channel BPSK signals arriving at an antenna array. These methods consist of two parts, Constellation Estimation and Assignment. We give two methods for constellation estimation, the Smallest Distance Clustering and the Maximum Likelihood Estimation. While the latter is theoretically sound,the former is Computationally simple and intuitively appealing. We show that the Maximum Likelihood Constellation Estimation is well approximated by the Smallest Distance Clustering Algorithm at high SNR. The Assignment Algorithm exploits the structure of the BPSK signals. We observe that both the methods for estimating the constellation vectors perform very well at high SNR and nearly attain Cramer-Rao bounds. Using this fact and noting that the Assignment Algorithm causes negligble error at high SNR, we derive an upper bound on the probability of bit error for the above methods at high SNR. This upper bound falls very rapidly with increasing SNR, showing that our constellation estimation-assignment approach is very efficient. Simulation results are given to demonstrate the usefulness of the bounds.

The system diagrams for the digital radio compatible with NASA's S-Band Space Network operating from 2025.8 - 2117.9 MHz (forward link) to 2200 - 2300 MHz (return link) are presented. The digital radio implementation includes binary phase shift keying (BPSK), quadrature phase shift keying (QPSK) and staggered quadrature phase shift keying (SQPSK). We have derived the system requirements for these modulation schemes from the Space Network User Guide (SNUG) and thereafter, derived system diagrams for the communication links. The designed system diagrams for the transceiver were implemented using Simulink models and USRP2 platform.