The subject of the thesis is design and check of steel load-bearing structure of a footbridge. The footbridge spans the river Svitava in the town Blansko. The span length is 24 metres. The structural design is spatial bar structure with two main trusses. The upper and lower chords are curved in the shape of circular arch and they are connected by diagonal bars. In the level of the upper and lower chords the beams are connected by floor beam. Horizontal rigidity of the upper and lower construction area is secured by bracings. The bridge deck is laid on the lower floor beam. The solution is the result of the comparison and evaluation of two variants.

The aim of the final thesis was to design and assess timber loadbearing structure of planetarium located in Brno and height of the construction 10 m. Designed building of planetarium consists of dome and hall, which operate separately. The structure is designed from glue laminated timber, solid timber and steel bracing, ridge ring and connecting elements. Building foundations is solved by reinforced anchor blocks fixed to foundation pads, which are connected by foundation strips. Loadbearing structure of the dome consists of arched beams together with purlins and ridge ring. Stability is ensured by 4 fields of cross bracing located between purlins. Loadbearing structure of the hall consists of roof and wall beams connected by frame corners together with roof and wall purlins. In gable walls is structure complemented by columns. Stability is ensured by diagonal and vertical elements situated between wall purlins, which together form a truss system.

The diploma thesis is focused on structural design and assessment of lookout tower, which is made of reinforced concrete and steel bracing elements. Structural design was performer in accordance with valid eurocodes and standards. The work is accompanied by construction drawings, drawings of shapes, reinforcement and steel elements, and documents from manufacturers.

The subject of this master’s thesis is to design the supporting steel structure covered pedestrian bridge between the learning area buildings A and D of the Faculty of Civil Engineering, street Veveří 95 in Brno. The construction is designed as a bridge rod spatial structure with two main girders. The girders are a combination Vierendeel girder and truss structure. The girders are connected at the level of the upper and lower band by a crosspiece. The horizontal stiffness of the upper and lower surface structure is ensured by bracing. The upper surface of the pedestrian bridge is horizontal in the longitudinal direction. The lower surface of the pedestrian bridge is curved in order to overcome the difference in height between buildings A and D. This solution is the result of comparison an evaluation of three alternative solutions.

The subject of this diploma thesis is dealing with a construction-technological project of a hotel in Dolní Lomná. The main subject of this thesis is a technological report, coordination situation of the construction with broader relations to transport routes, a time and financial plan of the construction, a feasibility study of the main technological phases, a project of the site equipment, a suggested list of the main construction vehicles and building mechanisation, a time-schedule plan, a plan of material resources, a technological regulation for the implementation of monolithic ceilings, control and test plan, health and safety at work and a technological regulation for the implementation of rider bracing with economic balance. Part of the work is the itemized budget and calculating to THU.

Diploma thesis includes design and examination of steel load-carrying structure. Construction includes car deal warehouse and car repair shop with extension for car varnishing. Car deal warehouse has ground dimensions 22 x 30 m and total high 10 m. Main frame is composed of Vierendeel trusses with arc shape. Car repair shop has ground dimensions 20 x 30 m and total high 10 m. Main frame is composed of truss girders and web-plate columns. Frame extension has ground dimension 20 x 10 m and total high 6,4 m. Cladding is composed of sandwich panels. Store´s gable wall and a part of the roof are glass. Climatic load is intended for locality Ostrava.

Work deals with variant design of steel structure of ice hockey stadium located in Opava. It is a three-aisled hall with shape consists of intersection of ellipse and rectangle with dimensions 70 x 82m. The roof has cylindrical shape with approx. 50 m radius. The building is about 14 m high. Object is divided to three parts – main aisle and two side aisles. The main aisle contains of a rectangle of dimensions 40 x 42 m and two semicircles of radius approx. 20 m. Frames of main aisle are made of arc roof truss connected to steel plate columns. The side aisles with rectangular shape with dimensions 15 x 42 m are connected to main aisle. The structure of side aisle is made of a sloped roof truss. Longitudinal bracing and cross bracing are used to obtain spatial rigidity of the structure. Roof and wall cladding is made of Kingspan sandwich panels.

The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.

The aim of this master thesis is to design and check a bearing structure of The multifunctional center in Jihlava. A bulding is partly ground flooring. The structure follows an L-curve in a plan with the biggest axial lenght of 40 m. A roofing is in a shed shape and the pitch of the roof is 5,73°. The highest point of the bearnig structure is 11,5 m. The structure has various frame systems, which is a truss, a gross-cross section beam with an inner column in the middle of a span and a gross-cross section beam without an inner column. The structure is designed mainly from timber members, a glulam and solid timber. A steel part of structure consists of the metal fasteners and rods.

The aim of the final thesis is to design and structural design report of selected elements of prefabricated storage hall. Processing of foundation drawing, element composition and for each designed element formwork drawing and reinforcement. It is a single-storey hall, where the main structural system consists of a transversal frame columns and prestressed girder. In this final thesis I designed and structural assessed prestressed girder, reinforced concrete purlin, roof bracing, column, grade beam and foundation pad. The calculation software Scia Engineer is used to calculate the effects of internal forces. The results are compared using a simplified method. The design and structural assessment are made according to valide standards. The designed construction complies with the limit state of ultimate and serviceability.