Spelling suggestions: "subject:"reach korrosionsmonitoring."" "subject:"reach emissionmonitoring.""
1 |
Measurement and validation of waterlines and surface currents using surf-zone video imaging.Naicker, Jaysen. January 2001 (has links)
The continuous monitoring of beaches and structures near, or in the surf-zone, has become a vital task from an environmental and economic standpoint. Specifically, the Durban beaches are continually nourished with sand that is dredged south of the Durban Harbour mouth. Constant monitoring is essential to control the erosion and accretion of these beaches. Currently, infrequent and labour-intensive manual surveys are being used to fulfil this task. This dissertation describes the techniques used to process and validate surf-zone video images to extract information, which is equivalent but more frequent and cost effective to that obtained using manual surveying methods. The emphasis is on the extraction of accurate hourly waterlines by analysing video images obtained from Coastal Imaging stations located at Addington Beach and North Beach in Durban, South Africa and the measurement of rip currents in the surf-zone from video images together with the validation of these results. The implementation of a neural network incorporating non-local image pixel data is more reliable than previously used methods, for example, grayscale thresholding or the delta-discriminator. Grayscale thresholding relies on the difference between the water and the sand pixel intensities. The delta-discriminator incorporates hue-saturation-lightness (HSL) values to improve the discrimination between water and sand. These methods could not, however, overcome the problem of varying seasonal and diurnal light intensities and require the prior choice of threshold values. The use of non-local data, such as the average RGB-values, in addition to individual pixel values as inputs to a neural network is shown to give better results in changing ambient lighting conditions. Wavelet and Fourier analysis of the temporal nature of the breaking waves in the surf-zone is also used to calculate more accurate waterlines. These extracted waterlines are validated by data collected from manual surveys. The use of Digital Correlation Image Velocimetry (DCIV) has been proven as a successful method in tracing velocity flow fields in a fluid medium. Typically, the medium is populated with distinct seeds that are tracked through successive video frames using a cross-correlation technique. It is shown that DCIV can be used in surf-zone images to measure surface rip currents by tracking the structure of the advected foam. This technique was validated by simultaneously tracking a large number of yellow corks scattered on the water surface. / Thesis (M.Sc.)-University of Natal, Durban, 2001.
|
2 |
Longshore currents near Cape Hatteras, NCSmallegan, Stephanie M. 06 April 2012 (has links)
As part of a beach erosion field experiment conducted at Cape Hatteras, NC in February 2010, this study focuses on quantifying longshore currents, which are the basic mechanism that drives longshore sediment transport. Using video imagery, the longshore currents in view of a video camera are estimated with the Optical Current Meter technique and the nearshore morphology is estimated by analyzing breaking wave patterns in standard deviation images.
During a Nor‟easter storm event on February 12 and 13, 2010, the video longshore currents are compared to in situ data and it is found that the currents are most affected by the angle of incidence of incoming waves, increasing in magnitude as the angle becomes more oblique due to a larger component of radiation stress forcing in the longshore direction. The magnitude of the radiation stress forcing, which is at least an order of magnitude larger than the surface wind stress, increases as wave height increases or tide level decreases, which causes more wave breaking to occur. The normalized standard deviation images show wave breaking occurring at an inshore and offshore location, corresponding closely to the locations of an inner and outer bar indicated in survey data.
Using two profiles from the survey data, one profile that intersects a trough and one that intersects a terrace, the video currents are also compared to currents simulated in one-dimension using the circulation module, SHORECIRC, and the wave module, REF/DIF-S, as part of the NearCoM system. Although the simulated currents greatly underpredict the video currents when the flow is only driven by radiation stresses, a mean water level difference between the two profiles creates a longshore pressure gradient. Superimposing a pressure gradient forcing term into the longshore momentum balance that assumes an equilibrium state of the flow, the magnitude of the simulated currents are much larger than the magnitude of the video estimated currents. Using analytical solutions of simplified forms of the mass and momentum equations to determine the effects of accelerations on the flow, it is seen that the acceleration term greatly affects the flow due to the relatively large mean water level difference that acts over a relatively short distance. Therefore, the pressure gradient forcing term is modified to include the effects of accelerations. By including the two-dimensional effects of the acceleration in the one-dimensional model through the modified pressure gradient, the quasi two-dimensional model simulated currents are very similar to the video estimated currents, indicating that the currents observed in the video may be pressure gradient driven.
|
Page generated in 0.1377 seconds