Global ETD Search

11	The influence of inlet pressure and shaft speed on end leakage of a full journal bearing Christenson, Danny Linn January 2011 (has links) Digitized by Kansas Correctional Industries Lubrication and lubricants Bearings (Machinery)
12	Prediction of bearing failure in pin-loaded laminates Ujjin, Rapee, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW January 2007 (has links) This thesis presents the results of an investigation of bearing failure at a loaded hole in carbon fibre composite laminates. The investigation included finite element analysis and a program of experimental testing for quasi-isotropic laminates, uni-directional laminates and laminates with fibres steered along predefined trajectories. The investigation formed part of a research program in the Cooperative Research Centre for Advanced Composite Structures Ltd (CRC-ACS) support by the Office of Naval Research from the United States. Work in progress in the CRC includes research defined in this thesis including the addition of nano-particles to the resin to improve the bearing strength. The literature survey undertaken in this thesis identified that the micro-buckling theory proposed by Professor C.T. Sun from Purdue University, Indiana USA, is the best analysis procedure for initial bearing failure in pin-loaded laminates. This failure theory has therefore been implemented in a Fortran program using the results from a finite element analysis for the nonlinear contact problem of a pin bearing on a hole in a composite laminate. The finite element analysis is executed using the commercial finite element system MSC.MARC. The numerical predictions have been validated by a test of progressive failure with the aid of an acoustic emission monitoring system. The acoustic emission parametric and frequency analysis is performed using the acoustic emission software Vallen Systeme. Fast fourier transformation of the waveform have been achieved to distinguish and identify microfailure mode. Failure mechanisms have been verified by post-mortem microstructural examination. There are 3 failure mechanisms associated with bearing failure in carbon fibre reinforced epoxy composite, the first is fibre matrix interfacial failure, followed by fibre fracture, and subsequently matrix splitting. The application of AE technique has been applied successfully to characterise the development of failure. Bearings (Machinery) Laminated fabrics.
13	Kritische drehzahlen als folge der nachgiebigkeit des schmiermittels im lager ... Hummel, Charles. January 1926 (has links) Inaug.-diss.--Eidgenössische technische hochschule, Zürich. / Lebenslauf.
14	Some experiments with sleeve bearing metals Lunn, Borge. January 1952 (has links) Afhandling--Polyteknisk laereanstalt, Copenhagen. / Thesis note on p. [4]. Summary in English, German and Danish. Bibliography: p. 131-135. Bearings (Machinery) Metals.
15	Performance studies of externally pressurized air thrust bearings. Ho, Kwong-wai. January 1976 (has links) Thesis (M. Phil.)--University of Hong Kong, 1977. Bearings (Machinery) Compressed air.
16	CONTACT STRESSES BETWEEN FINITE TWO-DIMENSIONAL ELASTIC BODIES Blackketter Dennis Oren, 1932- January 1966 (has links) No description available. Rolling contact. Bearings (Machinery)
17	Pressure and temperature measurement techniques in elastohydrodynamic contacts Turchina, Valentin Alexandru 08 1900 (has links) No description available. Lubrication and lubricants Bearings (Machinery)
18	Remote condition monitoring of rolling element bearings with natural crack development Williams, Tracy Denise 05 1900 (has links) No description available. Bearings (Machinery) Rolling contact
19	An analysis of the full floating textile spindle bearing Williams, James Frederick 12 1900 (has links) No description available. Spinning machinery Bearings (Machinery)
20	A further analysis of the full floating textile spindle bearing Teasley, Gladstone Alfred 12 1900 (has links) No description available. Spinning machinery Bearings (Machinery)

Search results