Call number: LD2668 .T4 1985 T53 / Master of Science

The purpose of this research was to develop and test a radiation detector to perform beta dosimetry and spectroscopy. The detector utilizes plastic scintillator volumes to produce scintillation light in proportion to the amount of energy deposited in them, and a large-area avalanche photodiode to convert the light to electrical signals. Pulse processing electronics transform the electrical signals into a format useful for analysis, and various software programs are used to analyze the resulting data. The detector proved capable of measuring dose, as compared to Monte Carlo n-Particle simulations, to within about 50% or better, depending on geometry and source type. Spectroscopy results, in conjunction with MCNP-based spectral enhancement methods, proved the detector capable of recording beta spectra with endpoint energies greater than about 250 keV. The detector shows promise for further development as a portable beta detector for field use in beta-contaminated areas. / Graduation date: 2005

'Hot particle' skin dosimetry calculations are commonly performed using homogeneous dose-point kernels (DPK) in conjunction with scaling and backscatter models to account for non-homogeneous geometries. A new scaling model for determining the actual DPK for beta-particles transmitted by a high-Z source material has been developed. The model is based on a determination of the amount of mono-energetic electron absorption that occurs in a given source thickness through the use of EGSnrc (Electron Gamma Shower) Monte Carlo simulations. Integration over a particular beta spectrum provides the beta-particle DPK following self-absorption as a function of source thickness and radial depth in water, thereby accounting for spectral hardening that may occur in higher-Z materials. Beta spectra of varying spectral shapes and endpoint energies were used to test our model for select source materials with 7.42 < Z ��� 94. A new volumetric backscatter model has also been developed. This model corrects for beta-particle backscattering that occurs both in the source medium and in the atmosphere surrounding the source. Hot particle backscatter factors are constructed iteratively through selective integration of point-source backscatter factors over a given source geometry. Selection criteria are based on individual source-point positions within the source and determine which, if any, backscatter factors are used. The new scaling model and backscatter model were implemented into the DPK-based code VARSKIN 4 for extensive dose testing and verification. Verification results were compared to equivalent Monte Carlo simulations. The results demonstrate that significant improvements can be made to DPK-based models when dealing with high-Z volumetric sources in non-homogeneous geometries. / Graduation date: 2013