DIPLOMA THESIS IN THEIR THEORETICAL PART ARE FOCUSE , USE LIGHTWEIGHT AGGREGATES FOR THE PRODUCE OF VERY LIGHTWEIGHT CONCRETE, FOCUSES PRIMARILY ON FOAM GLASS AGGREGATES. THERE ARE ALSO MENTIONED OTHERS LIGHTWEIGHT AGREGATES, WHICH WE ARE USE FOR PRODUCE O VERY LIGHTWEIGHT CONCRETE. THEN THERE ARE RISKS UNITED WITH VERY LIGHTWEIGHT CONCRETE. IN THE PRACTICAL PART IS THE PROPERTY ANALLYSIS OF FOAM GLASS AGGREGATES, DESIGN RECIPE VERY LIGHTWEIGHT CONCRETE AND MONITORED MECHANICAL A THERMAL PROPERTIES OF THESE CONCRETE.

This diploma thesis deals with possibilities of application of basalt fibers in concrete and in cementitious composites. In the theoretical part there is a summary of fibers usually used for fiberconcretes. Manufacturing process of basalt fibers is described, and properties of basalt fibers are summarized. Next part deals with properties of basalt fiber reinforced concrete. Concretely fresh properties, physical-mechanical properties, shrinkage and cracking, microstructure and fire resistance. The last chapter deals with fire resistance of concrete in general. The experimental part of this diploma thesis is divided into two phases. There were two mixes of basalt fiber reinforced concrete made with basalt aggregate and one mix of concrete without basalt fibers in the first phase. Density, consistency by slump and air content were determined as fresh properties. As hardened properties density, compressive strength and flexural strength were determined. There was determined the effect of the temperatures 600 and 800 °C on density, compressive strength and outward of specimens. Also, deformation during the high temperature curing was recorded. In the second phase of the experimental part there were three mixes of cementitious composite made with basalt fibers and one cementitious composite without basalt fibers. Density was determined as a fresh property. Material was monitored during its mixing. As a hardened properties density, flexural strength and compressive strength were determined. There was determined the effect of the temperatures 600 and 800 °C on density, flexural strength, compressive strength and outward of specimens.

The aim of this work is to describe the current technology of surface processing with a view to improve durability and aesthetic appearance. The work is described in detail features and coatings polymer materials applied, including curing process. In the practical part is a laboratory examination of the influence of sealing and hydrophobicizing additive properties of concrete and also will be tested concrete surface on the absorbency, grindability loss and color retention, slip resistance and resistance to CHRL.

This diploma thesis is focused on the study of the thermal properties of high-performance fiber reinforced concrete HPFRC. The composites are based on a combination of steel and polymeric fibers. Typical properties of these materials include high mechanical strength, water resistence and salt penetration. HPFRCs are mainly used in the construction industry to build tall buildings. The differential transient method was used to study thermophysical variables. The theoretical part of the thesis described the types of concrete, their production, and their properties. Furthermore, thermophysical quantities and methods of their determination (stationary and transient methods, thermal analysis) are defined in the thesis. The aim of the thesis was to determine thermal properties, namely thermal conductivity and specific heat capacity. The results of the thesis can reveal changes in the composition of studied materials as well as critical temperatures for damaging the materials.

This diploma thesis deals with the application of basalt reinforcement in lightweight concretes. In the practical part, the comparison of steel and basalt reinforcement in concrete from agloporite and steel reinforcement in concrete from Liapor is performed experimentally.

This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.

This master´s thesis deals with the suppression of the growing of algae in cooling towers. Subject of the work is suggestion and testing surface modification of the existing mature concrete in order to suppress the growth of algae. In the frame surface modification, several commercially available and newly developed systems were tested. Testing systems are based on the basis of portland cement, geopolymers or formation of insoluble complex compounds containing metal elements (Zn, Cu). Experimental methods were applied in the real environment of cooling towers of Dukovany Nuclear power plant.

The master thesis deals with the making of new municipal building project documentation. The building has two elevated floors and one underground floor; it is made of concrete block formwork and ceramic bricks. The ceiling structures and stairs are of monolithic reinforced concrete. For the flat roof a single ply roofing system is used.

Multifunctional building with 4 floors above ground and one underground which houses public garage. 1st floor is occupied by shops and apartments above them.The building is covered with single skin roofing.

Master’s thesis deals with the design and assessment of the bearing structure of sewage treatment plant and development of the drawnings. The thesis solves the main part of the structure: base slabs, walls and ceiling slabs. Thesis solves the ultimate limit state and ultimate limit serviceability.