The bio-enabled syntheses of functional nano-structured metal oxide thin films is of importance for a range of applications, in photonics, electronics, sensing, cell engineering, and biochemical devices. This type of novel syntheses method can overcome problems common in conventional oxide processing. In general, conventional oxide processes often require thermal treatment, caustic chemicals, and mechanical processing when producing shape-controlled inorganic materials. In contrast, biological processes are usually carried out under mild conditions (low temperature, neutral pH, and atmospheric pressure) and are therefore promising for the development of benign processes. Functional materials synthesized at room temperature using biomolecules are promising due to their expediency. During recent years, significant discoveries and progress have been made in discovering, and finding new applications for such biomimetic oxide-based minerals. However, much of the research has focused on SiO- and TiO-bearing organic-inorganic hybrid materials, of which a significant limitation is that, there are relatively few water-soluble inorganic oxide precursors commercially available for such biological syntheses. Two common compounds that are used in the biomimetic syntheses of SiO₂ and TiO₂ are tetramethoxisilane (TMOS) and Ti(IV) -bis(ammonium lactato) dihydroxide ( TiBALDH ). As a result, approaches to synthesize new water-soluble transitional metal complexes for use as precursors in the biomineralization of the corresponding functional metal oxide thin films were explored in this work, in order to expand the range of functional oxide chemistries formed via bio-enabled methods. A Ti-containing compound was synthesized to compare the behavior of commercially-available and as-synthesized TiBALDH. Another titanium-containing complex with citrate ligands, instead of lactate, was also synthesized to investigate the influence of the ligand type on the deposition behavior of the precursors. Zirconium- and hafnium-containing complexes were also synthesized to demonstrate the feasibility and versatility of the idea of applying bio-enabled syntheses to the fabrication of functional mineral oxides other than the reported SiO₂ and TiO₂. The second part of this thesis focuses on developing a novel way to fabricate porous functional mineral oxide thin films with controlled pore size, which can be used in a variety of applications, such as dye loading for optical, photochemical, or electrochemical purposes. Commercially-available, carboxyl-group-terminated polystyrene spheres of different sizes were utilized as pore-size controllers in the bio-enabled syntheses of TiO₂ by protamine. This approach has been found to be an effective means of creating uniform pores in inorganic mineral oxide coatings. The accomplishments of this work have the potential to be integrated so as to expand the boundaries of biomineralization in materials science and engineering fields.

<p>Impressive examples of the generation of hierarchically-patterned, three-dimensional (3-D) structures for the control of light can be found throughout nature. <i>Morpho rhetenor</i> butterflies, for example, possess scales with periodic parallel ridges, each of which consists of a stack of thin (nanoscale) layers (lamellae). The bright blue color of <i>Morpho</i> butterflies has been attributed to controlled scattering of the incident light by the lamellae of the wing scales. Another stunning example is the frustule (microshell) of the <i>Coscinodiscus wailesii</i> diatom, which is capable of focusing red light without possessing a traditional lens morphology. The photonic structures and the optical behaviors of <i>Morpho</i> butterflies and <i>Coscinodiscus wailesii</i> diatoms have been extensively studied. However, no work has been conducted to shift such light manipulation from the visible to the infrared (IR) range via shape-preserving conversion of such biogenic structures. Controlling IR radiation (i.e., heat) utilizing biogenic or biomimetic structures can be of significant utility for the development of energy-harvesting devices. In order to enhance the optical interaction in the IR range, inorganic replicas of biogenic structures comprised of high-refractive-index materials have been generated in this work. Such replicas of <i>Morpho</i> <i>rhetenor</i> scales were fabricated via a combination of sol-gel solution coating, organic pyrolysis, and gas/solid reaction methods. Diatomimetic structures have also been generated via sol-gel coating, gas/solid reaction, and then patterning of pore arrays using focused ion beam (FIB) milling.</p> Throughout the sol-gel solution coating and chemical conversion steps of the processes developed in this study, attention was paid to preserve the starting shapes of the nanopatterned, microscale biogenic or biomimetic structures. Factors affecting such shape preservation included the thicknesses and uniformities of coatings applied to the biogenic or biomimetic templates, nano/microstructural evolution during thermal treatment, and reaction-induced volume changes. A conformal surface sol-gel (SSG) coating process was developed in this work to generate oxide replicas of <i>Morpho rhetenor</i> butterfly scales with precisely-controlled coating thicknesses. The adsorption kinetics and relevant adsorption isotherm of the SSG process were investigated utilizing a quartz crystal microbalance. Analyses of thermodynamic driving forces, rate-limiting kinetic steps, and volume changes associated with various chemical reactions were used to tailor processing parameters for optimized shape preservation.