This work is a multi-scale effort to confront the rapidly evolving threat of biological weapons attacks through improved bioaerosol surveillance, detection, and response capabilities. The effects of bioaerosol release characteristics, transport in the atmospheric surface layer, and implications for bioaerosol sampler design and real-time detection were studied to develop risk assessment and modeling tools to enhance our ability to respond to biological weapons attacks. A simple convection-diffusion-sedimentation model was formulated and used to simulate atmospheric bioaerosol dispersion. Model predictions suggest particles smaller than 60 micrometers in aerodynamic diameter (AD) are likely to be transported several kilometers from the source. A five fold increase in effective mass collection rate, a significant bioaerosol detection advantage, is projected for samplers designed to collect particles larger than the traditional limit of 10 micrometers AD when such particles are present in the source distribution. A family of dynamically scaled wetted-wall bioaerosol sampling cyclones (WWC) was studied to provide bioaerosol sampling capability under various threat scenarios. The effects of sampling environment, i.e. air conditions, and air flow rate on liquid recovery rate and response time were systematically studied. The discovery of a critical liquid input rate parameter enabled the description of all data with self-similar relationships. Empirical correlations were then integrated into system control algorithms to maintain microfluidic liquid output rates ideally suited for advanced biological detection technologies. Autonomous ambient air sampling with an output rate of 25 microliters per minute was achieved with open-loop control. This liquid output rate corresponds to a concentration rate on the order of 2,000,000, a substantial increase with respect to other commercially available bioaerosol samplers. Modeling of the WWC was performed to investigate the underlying physics of liquid recovery. The set of conservative equations governing multiphase heat and mass transfer within the WWC were formulated and solved numerically. Approximate solutions were derived for the special cases of adiabatic and isothermal conditions. The heat and mass transfer models were then used to supplement empirical correlations. The resulting semi-empirical models offer enhanced control over liquid concentration factor and further enable the WWC to be deployed as an autonomous bioaerosol sampler. / text

La détection d'agents biologiques dans l'air ambiant est devenue un enjeu majeur notamment en environnement hospitalier et dans la protection contre le bioterrorisme. Dans ce contexte, la miniaturisation des dispositifs d'analyse permet d'envisager leur utilisation directement sur la zone d'étude. Afin d'obtenir un échantillon concentré et représentatif, la filtration de l'air reste cependant un point délicat. Parmi les différents principes exploitables pour la collecte de particules aéroportées, l'emploi des forces électriques semble être prometteur pour améliorer les performances des dispositifs qui se trouvent généralement fondés sur des forces inertielles. Dans cette étude, une modélisation fine des collecteurs électrostatiques a été conduite pour une géométrie fil / cylindre. Elle décrit tout d'abord les champs hydrodynamiques d'un écoulement charriant des inclusions dans lequel est imposée une décharge couronne. Une injection éventuelle de vapeur dans la chambre de collecte a nécessité ensuite la détermination des champs de température et concentration de la vapeur. Une analyse dimensionnelle inspectionnelle a montré que ces champs possèdent deux termes de couplage fort dont on a justifié l'omission dans cette étude ; les phénomènes physiques mis en jeu ont alors pu être classés selon une cascade d'influences non réciproques et la résolution numérique du modèle s'en est trouvée facilitée. Quatre configurations d'écoulement différentes, caractérisées par des recirculations d'origine électro hydrodynamiques, ont été identifiées et leurs impacts sur les rendements de collecte quantifiés. De plus, une procédure de dimensionnement des filtres électrostatiques fondée sur un nombre de Deutsch représentatif des rendements a été mise en place. Son exploitation a montré l'intérêt de la mise en parallèle de petits collecteurs pour filtrer des débits d'air importants. Cette étude s'est achevée par l'analyse des effets engendrés par l'injection de vapeur dans la chambre de collecte. Elle a jeté les bases d'une explication pour l'augmentation des rendements de collecte résultant de cette injection. / Detection of airborne biological agents has become a major challenge especially in hospitals and the protection against bioterrorism. In this context, the miniaturization of analytical devices allows to consider their direct use in the field. To obtain a representative and concentrated sample, air filtration remains a delicate point. Among the various principles used to collect airborne particles, the use of electrical forces seems to be promising to improve performance beyond these of devices that are based on inertial forces.In this study, a detailed model of electrostatic collectors was developed in the wire/cylinder geometry. It first describes the hydrodynamic flow fields carring inclusions in which a corona discharge is imposed. Afterwards, the possible injection of steam into the collection chamber required the determination of the temperature and vapor concentration fields. An inspectionnal dimensional analysis justified the omission of two strong coupling terms. Therefore, in this study, the involved physical phenomena could be classified according to a non-reciprocal influences cascade and the numerical model is become simpler. Four different flow patterns, characterized by their electrohydrodynamic secondary flows, were identified and their impact on the collection efficiencies was quantified. In addition a design procedure of electrostatic filters, based on a representative efficiency Deutsch number, has been developed. This procedure shows the interest of parallelizing small collectors to filter important airflows. This study was completed by the analysis of the effects of steam into the collection chamber. It provides the basis for an explanation of the collection efficiencies increase related to this injection.