Orientador: Ulf Friedrich Schuchard / Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica / Made available in DSpace on 2018-08-05T01:19:50Z (GMT). No. of bitstreams: 1 Lindner_Alexandra_M.pdf: 2658694 bytes, checksum: 362f3b881250b36386d301b17511943b (MD5) Previous issue date: 2005 / Mestrado / Quimica Organica / Mestre em Química

A review of the chemistry of poly(lactic acid) was carried out with a focus on techniques and applications of PLA polymer and copolymers with reference to some of the work that has been accomplished over the last 20 years or so. A review of the characterisation techniques used to analyse PLA polymers and copolymers was also carried out giving reference to the equipment and methods used herein. An investigation into the potential of PLA as the hydrophilic portion of a polymeric surfactant was carried out. To develop PLA based surfactants, the ring opening polymerisation of lactide was carried out in a melt in the presence of a long chain alcohol (C₇ to C₂₀) or diol (C₄ & C₆) to produce AB or ABA type polymers that follow the traditional surfactant template. Stannous octanoate and 4-dimethylaminopyridine were typically used as catalysts due to their high activity and relative cheapness. PLA only shows good hydrophilicity with up to 12 lactic acid units in the chain. Above this the electrostatic interactions between polymer chains reduced water solubility. It was also noted that D,L-lactide produced more water soluble polymers (syndiotactic) than the enantiomerically pure L-lactide (isotactic polymer chains). An investigation of the hydrophobic properties of PLA was carried out to evaluate their usefulness for other biodegradable surfactant applications. To this end an investigation of sugars as the hydrophilic portion of the molecule was carried out. Due to problems with solubilising sugars, they were deemed unsuitable for use as initiatiors within the scope of this research. Choline chloride was then investigated as a potential hydrophilic initiator and indeed has produced some of the most water soluble of PLA polymers. Choline chloride presented several challenges as an initiator, its high melting point resulted in polar solvents such as t-butanol being employed. Alternatively, more success was achieved by preparation of a choline chloride eutectic mixture prior to the polymerisation. It was discovered that a choline chloride/urea eutectic mixture was capable of self initiation, thus required no further addition of catalyst, this result shows a potential step forward in PLA green chemistry. A final investigation into producing surface-active PLA in a one-pot process that required only a hydroxycarboxylate initiator was carried out. The production of PLA sodium or potassium salts was carried out in a melt polymerisation and the results show some promise. Initiators that have been employed include a range of a, b and g-hydroxycarboxylic acids. These work through tautomerisation to the alkoxide, which then initiates a living type polymerisation of lactide to produce surface-active polymers. As well as the synthesis of these polymers some analysis of the physical and aqueous properties of these materials was carried out. PLA sodium salts were shown to have reasonable surfactant ability (~45 mNm⁻¹) and low CMC values of around 5x10⁻⁹ mol cm⁻³. They were also shown to have some properties as emulsifiers, and in some cases showed non-Newtonian fluid behaviour such as shear-thinning (thixotropy) and shear-thickening (dilatant). The thermal characteristics of the polymers such as T[subscript]g and stability were assessed as well as their ability to retain water.

[pt] Ésteres de glicerol derivados de ácidos graxos são surfactantes não iônicos com aplicação como lubrificantes, agentes anti-estáticos, auxiliares de processamento, plastificantes, anti-espumas, agentes de dispersão e de outras aplicações que requerem atividade bifuncional. Os monoésteres de glicerol derivados de ácidos graxos naturais, tais como ácido octanóico (C menos 8), decanóico (C menos 10) e octadecanóico (C menos 18), foram sintetizados e caracterizados por técnicas de infravermelho e ressonância magnética nuclear de hidrogênio e carbono 13. Eles foram espalhados sobre uma subfase aquosa formando filmes de Langmuir em uma cuba de teflon. As propriedades interfaciais destes surfactantes foram investigadas na interface ar-água. Desta forma, foi também possível avaliar a isoterma de Langmuir Pi-A e as propriedades mecânicas das monocamadas através do módulo de compressão (Cs elevado a potencia negativa 1). As monocamadas mostraram um comportamento na fase de líquido expandido confirmado pelo módulo de compressão de 10 a 70 mN/m e na fase de líquido condensado confirmado pelo módulo de compressão de 70 a 175 mN/m. Por meio da espectroscopia de reflexão-absorção de infravermelho com fotomodulação (PM-IRRAS) e a microscopia no ângulo de Brewster (BAM) foi avaliada a organização dos filmes de Langmuir dos surfactantes. A elasticidade superficial dilatacional (E) dos filmes adsorvidos foram analisadas pelo método da gota pendente em um goniômetro. / [en] Fatty acid glycerol esters are non-ionic surfactants with application as lubricants, antistatic agents, processing aids, plasticizers, defoamers, dispersion aids and other applications requiring bifunctional activities. Monoesters of glycerol based on natural fatty acids such as octanoic acid (C less 8), decanoic acid (C less 10) and octadecanoic acid (C less 18), were synthesized and characterized by infrared and hydrogen nuclear magnetic resonance and carbon 13 nuclear magnetic resonance techniques. They were spread over the water subphase forming Langmuir films in a Teflon trough. The interfacial properties of these surfactants at the air/water interface have been investigated. Thus it was also possible to evaluate the Langmuir Pi-A isotherm and mechanical properties of the monolayers by calculating the compression modulus (Cs elevated to negative power 1). The monolayers showed a behavior in the expanded liquid phase, confirmed by the compression modulus between 10 and 70 mN/m and a behavior in the condensed liquid phase confirmed by the compression modulus between 70 and 175 mN/m. Through photomodulated-infrared reflection-absorption spectroscopy (PM-IRRAS) and Brewster angle microscopy (BAM) was evaluated organization of Langmuir films of surfactants. The surface dilatational elasticity (E) of the adsorbed films were analyzed by the pendant drop method with a goniometer apparatus.