Capture-recapture methods take their origins from animal abundance estimation, where they were used to estimate the unknown size of the animal population under study. In the late 1940s and again in the late 1960s and early 1970s these same capture-recapture methods were modified and applied to epidemiological list data. Since then through their continued use, in particular in the 1990s, these methods have become popular for the estimation of the completeness of disease registries and for the estimation of the unknown total size of human disease populations. In this thesis we investigate new methods for the analysis of epidemiological list data using capture-recapture methods. In particular we compare two standard methods used to estimate the unknown total population size, and examine new methods which incorporate list mismatch errors and model-selection uncertainty into the process for the estimation of the unknown total population size and its associated confidence interval. We study the use of modified tag loss methods from animal abundance estimation to allow for list mismatch errors in the epidemio-logical list data. We also explore the use of a weighted average method, the use of Bootstrap methods, and the use of a Bayesian model averaging method for incorporating model-selection uncertainty into the estimate of the unknown total population size and its associated confidence interval. In addition we use two previously unanalysed Diabetes studies to illustrate the methods examined and a well-known Spina Bifida Study for simulation purposes. This thesis finds that ignoring list mismatch errors will lead to biased estimates of the unknown total population size and that the list mismatch methods considered here result in a useful adjustment. The adjustment also approximately agrees with the results obtained using a complex matching algorithm. As for the incorporation of model-selection uncertainty, we find that confidence intervals which incorporate model-selection uncertainty are wider and more appropriate than confidence intervals that do not. Hence we recommend the use of tag loss methods to adjust for list mismatch errors and the use of methods that incorporate model-selection uncertainty into both point and interval estimates of the unknown total population size. / Subscription resource available via Digital Dissertations only.

Capture-recapture methods take their origins from animal abundance estimation, where they were used to estimate the unknown size of the animal population under study. In the late 1940s and again in the late 1960s and early 1970s these same capture-recapture methods were modified and applied to epidemiological list data. Since then through their continued use, in particular in the 1990s, these methods have become popular for the estimation of the completeness of disease registries and for the estimation of the unknown total size of human disease populations. In this thesis we investigate new methods for the analysis of epidemiological list data using capture-recapture methods. In particular we compare two standard methods used to estimate the unknown total population size, and examine new methods which incorporate list mismatch errors and model-selection uncertainty into the process for the estimation of the unknown total population size and its associated confidence interval. We study the use of modified tag loss methods from animal abundance estimation to allow for list mismatch errors in the epidemio-logical list data. We also explore the use of a weighted average method, the use of Bootstrap methods, and the use of a Bayesian model averaging method for incorporating model-selection uncertainty into the estimate of the unknown total population size and its associated confidence interval. In addition we use two previously unanalysed Diabetes studies to illustrate the methods examined and a well-known Spina Bifida Study for simulation purposes. This thesis finds that ignoring list mismatch errors will lead to biased estimates of the unknown total population size and that the list mismatch methods considered here result in a useful adjustment. The adjustment also approximately agrees with the results obtained using a complex matching algorithm. As for the incorporation of model-selection uncertainty, we find that confidence intervals which incorporate model-selection uncertainty are wider and more appropriate than confidence intervals that do not. Hence we recommend the use of tag loss methods to adjust for list mismatch errors and the use of methods that incorporate model-selection uncertainty into both point and interval estimates of the unknown total population size. / Subscription resource available via Digital Dissertations only.

Capture-recapture methods take their origins from animal abundance estimation, where they were used to estimate the unknown size of the animal population under study. In the late 1940s and again in the late 1960s and early 1970s these same capture-recapture methods were modified and applied to epidemiological list data. Since then through their continued use, in particular in the 1990s, these methods have become popular for the estimation of the completeness of disease registries and for the estimation of the unknown total size of human disease populations. In this thesis we investigate new methods for the analysis of epidemiological list data using capture-recapture methods. In particular we compare two standard methods used to estimate the unknown total population size, and examine new methods which incorporate list mismatch errors and model-selection uncertainty into the process for the estimation of the unknown total population size and its associated confidence interval. We study the use of modified tag loss methods from animal abundance estimation to allow for list mismatch errors in the epidemio-logical list data. We also explore the use of a weighted average method, the use of Bootstrap methods, and the use of a Bayesian model averaging method for incorporating model-selection uncertainty into the estimate of the unknown total population size and its associated confidence interval. In addition we use two previously unanalysed Diabetes studies to illustrate the methods examined and a well-known Spina Bifida Study for simulation purposes. This thesis finds that ignoring list mismatch errors will lead to biased estimates of the unknown total population size and that the list mismatch methods considered here result in a useful adjustment. The adjustment also approximately agrees with the results obtained using a complex matching algorithm. As for the incorporation of model-selection uncertainty, we find that confidence intervals which incorporate model-selection uncertainty are wider and more appropriate than confidence intervals that do not. Hence we recommend the use of tag loss methods to adjust for list mismatch errors and the use of methods that incorporate model-selection uncertainty into both point and interval estimates of the unknown total population size. / Subscription resource available via Digital Dissertations only.

Capture-recapture methods take their origins from animal abundance estimation, where they were used to estimate the unknown size of the animal population under study. In the late 1940s and again in the late 1960s and early 1970s these same capture-recapture methods were modified and applied to epidemiological list data. Since then through their continued use, in particular in the 1990s, these methods have become popular for the estimation of the completeness of disease registries and for the estimation of the unknown total size of human disease populations. In this thesis we investigate new methods for the analysis of epidemiological list data using capture-recapture methods. In particular we compare two standard methods used to estimate the unknown total population size, and examine new methods which incorporate list mismatch errors and model-selection uncertainty into the process for the estimation of the unknown total population size and its associated confidence interval. We study the use of modified tag loss methods from animal abundance estimation to allow for list mismatch errors in the epidemio-logical list data. We also explore the use of a weighted average method, the use of Bootstrap methods, and the use of a Bayesian model averaging method for incorporating model-selection uncertainty into the estimate of the unknown total population size and its associated confidence interval. In addition we use two previously unanalysed Diabetes studies to illustrate the methods examined and a well-known Spina Bifida Study for simulation purposes. This thesis finds that ignoring list mismatch errors will lead to biased estimates of the unknown total population size and that the list mismatch methods considered here result in a useful adjustment. The adjustment also approximately agrees with the results obtained using a complex matching algorithm. As for the incorporation of model-selection uncertainty, we find that confidence intervals which incorporate model-selection uncertainty are wider and more appropriate than confidence intervals that do not. Hence we recommend the use of tag loss methods to adjust for list mismatch errors and the use of methods that incorporate model-selection uncertainty into both point and interval estimates of the unknown total population size. / Subscription resource available via Digital Dissertations only.

Capture-recapture methods take their origins from animal abundance estimation, where they were used to estimate the unknown size of the animal population under study. In the late 1940s and again in the late 1960s and early 1970s these same capture-recapture methods were modified and applied to epidemiological list data. Since then through their continued use, in particular in the 1990s, these methods have become popular for the estimation of the completeness of disease registries and for the estimation of the unknown total size of human disease populations. In this thesis we investigate new methods for the analysis of epidemiological list data using capture-recapture methods. In particular we compare two standard methods used to estimate the unknown total population size, and examine new methods which incorporate list mismatch errors and model-selection uncertainty into the process for the estimation of the unknown total population size and its associated confidence interval. We study the use of modified tag loss methods from animal abundance estimation to allow for list mismatch errors in the epidemio-logical list data. We also explore the use of a weighted average method, the use of Bootstrap methods, and the use of a Bayesian model averaging method for incorporating model-selection uncertainty into the estimate of the unknown total population size and its associated confidence interval. In addition we use two previously unanalysed Diabetes studies to illustrate the methods examined and a well-known Spina Bifida Study for simulation purposes. This thesis finds that ignoring list mismatch errors will lead to biased estimates of the unknown total population size and that the list mismatch methods considered here result in a useful adjustment. The adjustment also approximately agrees with the results obtained using a complex matching algorithm. As for the incorporation of model-selection uncertainty, we find that confidence intervals which incorporate model-selection uncertainty are wider and more appropriate than confidence intervals that do not. Hence we recommend the use of tag loss methods to adjust for list mismatch errors and the use of methods that incorporate model-selection uncertainty into both point and interval estimates of the unknown total population size. / Subscription resource available via Digital Dissertations only.

Master of Science / Department of Statistics / Gary L. Gadbury / Discerning the metabolic or enzymatic role of a particular gene product, in the absence of information indicating sequence homology to known gene products, is a difficult task. One approach is to compare the levels of metabolites in a wild-type organism to those in an organism with a mutation that causes loss of function of the gene. The goal of this project was to develop an approach to analyze metabolite data on wild-type and mutant organisms for the purpose of identifying the function of a mutated gene. To develop and test statistical approaches to analysis of metabolite data for identification of gene function, levels of 141 lipid metabolites were measured in leaves of wild-type Arabidopsis thaliana plants and in leaves of Arabidopsis thaliana plants with known mutations in genes involved in lipid metabolism. The mutations were primarily in fatty acid desaturases, which are enzymes that catalyze reactions in which double bonds are added to fatty acids. When these enzymes are mutated, leaf lipid composition is altered, and the altered levels of specific lipid metabolites can be detected by a mass spectrometry. A randomization P-Value and other metrics were calculated for all potential reactant product pairs, which included all lipid metabolite pairs. An algorithm was developed to combine these data and rank the results for each pair as to likelihood of being the actual reactant-product pair. This method was designed and tested on data collected on mutants in genes with known functions, fad2 (Okuley et al., 1994), fad3 (Arondel et al., 1992), fad4, fad5 (Mekhedov et al., 2000), fad6 (Falcone et al., 1994), and fad7 (Iba et al., 1993 and Gibson et al., 1994). Application of the method to three additional genes produced by random mutagenesis, sfd1, sfd2, and sfd3, indicated that the significant pairs for fad6 and sfd3 were similar. Consistent with this, genetic evidence has indicated that sfd3 is a mutation in the FAD6 gene. The methods provide a list of putative reactions for an enzyme encoded by an unknown mutant gene. The output lists for unknown genes and known genes can be compared to provide evidence for similar biochemical activities. However, the strength of the current method is that the list of candidate chemical reactions for an enzyme encoded by a mutant gene can be produced without data other than the metabolite profile of the wild-type and mutant organisms, i.e., known gene analysis is not a requirement to obtain the candidate reaction list.

Doctor of Philosophy / Genetics Interdepartmental Program-Plant Pathology / James Nelson / The goal of quantitative-trait locus (QTL) mapping is to understand the genetic architecture of an organism by identifying the genes underlying quantitative traits. It targets gene numbers and locations, interaction with other genes and environments, and the sizes of gene effects on the traits. QTL mapping in plants is often done on a population of progeny derived from one or more designed, or controlled, crosses. These crosses are designed to exploit correlation among marker genotypes for the purposes of mapping QTL. Reducing correlations between markers can improve the precision of location and effect estimates by reducing multicollinearity. The purpose of this thesis is to propose an approach for developing experimental populations to reduce correlation by increasing recombination between markers in QTL mapping populations especially in selfing species. QTL mapping resolution of recombinant inbred lines (RILs) is limited by the amount of recombination RILs experience during development. Intercrossing during line development can be used to counter this disadvantage, but requires additional generations and is difficult in self-pollinated species. In this thesis I propose a way of improving mapping resolution through recombination enrichment. This method is based on genotyping at each generation and advancing lines selected for high recombination and/or low heterozygosity. These lines developed are called SA-RILs (selectively advanced recombinant inbred lines). In simulations, the method yields lines that represent up to twice as many recombination events as RILs developed conventionally by selfing without selection, or the same amount but in three generations, without reduction in homozygosity. Compared to methods that require maintaining a large population for several generations and selecting lines only from the finished population, the method proposed here achieves up to 25% more recombination. Although SA-RILs accumulate more recombination than conventional RILs and can be used as fine-mapping populations for selfing species, the effectiveness of the SA-RIL approach decreases with genome size and is most valuable only when applied either to small genomes or to defined regions of large genomes. Here I propose the development of QTL-focused SA-RILs (QSA-RILs), which are SA-RILs enriched for recombination in regions of a large genome selected for evidence for the presence of a QTL. This evidence can be derived from QTL analysis in a subset of the population at the F2 generation and/or from previous studies. In simulations QSA-RILs afford up to threefold increase in recombination and twofold increase in accuracy of QTL position estimate in comparison with RILs. The regional-selection method also shows potential for resolving QTL linked in repulsion. One of the recent Bayesian methods for QTL mapping, the shrinkage Bayesian method (BayesA (Xu)), has been successfully used for estimating marker effects in the QTL mapping populations. Although the implementation of the BayesA (Xu) method for estimating main effects was described by the author, the equations for the posterior mean and variance, used in estimation of the effects, were not elaborated. Here I derive the equations used for the estimation of main effects for doubled-haploid and F2 populations. I then extend these equations to estimate interaction effects in doubled-haploid populations. These derivations are helpful for an understanding of the intermediate steps leading to the equations described in the original paper introducing the shrinkage Bayesian method.

Doctor of Philosophy / Department of Statistics / Haiyan Wang / High throughput screening technologies have generated a huge amount of biological data in the last ten years. With the easy availability of array technology, researchers started to investigate biological mechanisms using experiments with more sophisticated designs that pose novel challenges to statistical analysis. We provide theory for robust statistical tests in three flexible models. In the first model, we consider the hypothesis testing problems when there are a large number of variables observed repeatedly over time. A potential application is in tumor genomics where an array comparative genome hybridization (aCGH) study will be used to detect progressive DNA copy number changes in tumor development. In the second model, we consider hypothesis testing theory in a longitudinal microarray study when there are multiple treatments or experimental conditions. The tests developed can be used to detect treatment effects for a large group of genes and discover genes that respond to treatment over time. In the third model, we address a hypothesis testing problem that could arise when array data from different sources are to be integrated. We perform statistical tests by assuming a nested design. In all models, robust test statistics were constructed based on moment methods allowing unbalanced design and arbitrary heteroscedasticity. The limiting distributions were derived under the nonclassical setting when the number of probes is large. The test statistics are not targeted at a single probe. Instead, we are interested in testing for a selected set of probes simultaneously. Simulation studies were carried out to compare the proposed methods with some traditional tests using linear mixed-effects models and generalized estimating equations. Interesting results obtained with the proposed theory in two cancer genomic studies suggest that the new methods are promising for a wide range of biological applications with longitudinal arrays.

Doctor of Philosophy / Department of Statistics / Gary Gadbury / In biomedical studies, the treatment main effect is often expressed in terms of an “average difference.” A treatment that appears superior based on the average effect may not be superior for all subjects in a population if there is substantial “subject-treatment interaction.” A parameter quantifying subject-treatment interaction is inestimable in two sample completely randomized designs. Crossover designs have been suggested as a way to estimate the variability in individual treatment effects since an “individual treatment effect” can be measured. However, variability in these observed individual effects may include variability due to the treatment plus inherent variability of a response over time. We use the “Neyman - Rubin Model of Causal Inference” (Neyman, 1923; Rubin, 1974) for analyses. This dissertation consists of two parts: The quantitative and qualitative response analyses. The quantitative part focuses on disentangling the variability due to treatment effects from variability due to time effects using suitable crossover designs. Next, we propose a variable that defines the variance of a true individual treatment effect in a two crossover designs and show that they are not directly estimable but the mean effect is estimable. Furthermore, we show the variance of individual treatment effects is biased under both designs. The bias depends on time effects. Under certain design considerations, linear combinations of time effects can be estimated, making it possible to separate the variability due to time from that due to treatment. The qualitative section involves a binary response and is centered on estimating the average treatment effect and bounding a probability of a negative effect, a parameter which relates to the individual treatment effect variability. Using a stated joint probability distribution of potential outcomes, we express the probability of the observed outcomes under a two treatment, two periods crossover design. Maximum likelihood estimates of these probabilities are found using an iterative numerical method. From these, we propose bounds for an inestimable probability of negative effect. Tighter bounds are obtained with information from subjects that receive the same treatments over the two periods. Finally, we simulate an example of observed count data to illustrate estimation of the bounds.

Doctor of Philosophy / Agronomy / Allan K. Fritz / Bikram S. Gill / Gary M. Paulsen / Post-anthesis high temperature stress in wheat (Triticum aestivum L.) is a major cause of yield reduction. This process results in the loss of viable leaf area and a decrease in green leaf duration ultimately causing a yield loss. The objectives of this study were to (i) phenotype a recombinant inbred line population for heat tolerance traits, (ii) understand the genetic basis of heat tolerance by mapping quantitative trait loci (QTL) linked to yield-related traits under high temperature, (iii) model stay-green under high temperature stress and map the QTL linked to stay-green parameters, and (iv) validate the markers linked to QTL under field conditions. A filial6:7 (F6:7) recombinant inbred line (RIL) population was developed by crossing Ventnor, a heat-tolerant white winter wheat with Karl 92, a relatively heat susceptible hard red winter wheat. From 10 DAA to maturity, the treatments of optimum temperature or high temperature stress (30/25°C) were imposed on the RILs. The traits measured included grain filling duration (GFD), kernels per spike, thousand kernel weight (TKW), and grain filling rate (GFR). The stay-green traits calculated were: i) time between 75% and 25% green, ii) maximum rate of senescence, iii) time to maximum rate of senescence, and v) percent green at maximum senescence. Genetic characterization was performed using microsatellite (SSR), amplified fragment length polymorphism (AFLP) and a sequence tag site (STS) markers. GFD was positively correlated with TKW and negatively with GFR and maximum rate of senescence. Principle component analysis (PCA) showed kernels per spike, maximum rate of senescence, and TKW accounted for 98% of total variability among the genotypes for heat tolerance. The most significant QTL for yield traits co-localized with marker Xgwm296 for TKW, Xgwm356 for kernels per spike, and Xksum61 for GFR. The QTL for stay-green traits co-localized with markers P41/M62-107 on Chromosome 2A, Xbarc136 on Chromosome 2D, P58/MC84-146 on Chromosome 3B, P58/M77-343 on Chromosome 6A, and. P58/MC84-406 on Chromosome 6B. These results indicate that increased green leaf area duration has a positive effect on the grain yield under high temperature. Once the kernels per spike are established, GFD and TKW can be used as selection criteria for post-anthesis heat-tolerance.