Spelling suggestions: "subject:"wird strike"" "subject:"bird strike""
1 |
BIRD STRIKE HAZARDS AT AIRPORTS AND ASSESSMENT OF BIRD STRIKES AT A MIDWESTERN AIRPORT: 2000-2007Brown, Robert Jeffrey 13 December 2008 (has links)
No description available.
|
2 |
Bird Strike Risk Assessment for United States Air Force Airfields and AircraftTedrow, Christine Atkins 05 February 1999 (has links)
Analysis of strike data is critical to determine the true economic costs of bird strikes, determine the magnitude of safety issues, and develop preventive measures. Analysis of USAF bird-strike data identified trends and indicated suggested relationships among factors contributing to damaging strikes. From FY 1988 through FY 1997, the annual mean was 2,668 bird strikes with peaks evident in fall and spring. Daylight and dusk were hazardous for bird strikes. More bird strikes occurred during airfield operations - aircraft are at low altitudes and soaring birds are more numerous. Aircraft speed, phase of flight, taxonomic group, bird mass and aircraft group were the strongest predictors of damaging bird strikes. Bird strike rates were calculated for USAF aircraft and selected USAF airfields. Bomber aircraft had the highest strike rate; these aircraft frequently fly long missions at low altitudes where they are likely to encounter birds. Logistic regression analyses estimated odds of occurrence for damaging bird strikes during airfield operations. General statistics, odds for a damaging airfield strike, and airfield strike rates, were used to identify USAF airfields with higher bird strike risks. Howard AFB, Panama, had a higher number and rate of bird strikes, and greater odds for a damaging bird strike than other airfields analyzed.
This study allows recommendations for improving reporting of bird strikes and data management. Results will enable USAF to better estimate bird strike risks aircraft, better focus research on preventing bird strikes, and assess the effectiveness of bird management programs. / Master of Science
|
3 |
Bird streamer initiated breakdowns under HVDC conditions.Naidoo, Kribashen. January 2007 (has links)
This dissertation describes the role played by bird streamers in transmission line faults under HVDC conditions. The research was initiated due to the lack of knowledge of these faults under HVDC conditions. An explanation as to what bird streamers faults are, the role they play in the breakdown of air-gaps and a means of preventing bird streamer caused faults from occurring is made Experimental work has been carried out in order to gain an understanding of these faults under HVDC conditions. The overall aim of the experiments was to find a horizontal distance (protected zone) on an HVDC tower top, in order to prevent birds from perching around the centre of the tower. This will lead to a reduction of bird streamer caused faults. A brass rod was used as the artificial streamer in the experiments, under both negative and positive polarity (voltages in the range 0 to 220 kV DC were applied). Later in the experimental phase, a string soaked in a saline solution was used as a more realistic simulation of a bird streamer. QuickField™, an FEM package, was used to simulate the electric field in the region of the live conductor fitting and the tip of the bird streamer, to assess the degree of distortion of the electric field caused by the introduction of the bird streamer. These simulations served as means of verifying the laboratory experiments. This dissertation has proposed a relationship between the breakdown voltage and the protected zone length, based on the air-gap breakdown voltages for both I-String and V-String insulator configurations in the air-gap range 0 to 350 mm. These curves can be used in the design of transmission lines, as a means of reducing bird streamer faults. / Thesis (M.Sc.Eng.)-University of KwaZulu-Natal, 2007.
|
4 |
Etude expérimentale multisensorielle de la dynamique des impacts d'oiseaux sur structures d'avionsVandeveld, Thierry F.R. 16 September 2009 (has links)
Chaque année, d'innombrables collisions se produisent entre des avions en vol et des oiseaux. L'impact aviaire, menace redoutée par les pilotes, concerne tant l'aviation civile que son pendant militaire. Les statistiques démontrent que, même si fort heureusement le nombre d'accidents graves reste limité, les incidents sont de plus en plus nombreux.<p>Parmi les acteurs qui luttent contre ce danger, les constructeurs d'avions jouent un rôle prépondérant. Contraints par des réglementations internationales, ils s'attachent à produire des éléments de structure qui résistent à l'impact d'oiseaux.<p>Dans la mise au point de leur produits, les avionneurs démontrent cette résistance à l'aide d'essais d'impact :on accélère un simulant d'oiseau jusqu'à la vitesse voulue -- de l'ordre de la vitesse de croisière nominale de l'avion -- et on le projette sur un aileron ou un morceau de fuselage. <p><p>La présente thèse doctorale, co-dirigée par les professeurs Philippe Bouillard de l'ULB et Marc Pirlot de l'ERM, contribue doublement à l'amélioration de ces techniques d'essais dynamiques.<p><p><p>D'une part, elle réalise la mise au point et la validation d'un lanceur pyrotechnique à double étage pour l'accélération du simulant d'oiseau. Un canon de calibre 20 mm est combiné avec un accélérateur de calibre 160 mm. La combustion d'un mélange de poudre propulsive contenu dans une douille adaptée génère les gaz à haute température et à haute pression nécessaires à l'accélération d'un simulant d'oiseau dûment confiné dans un conteneur de protection. Un dispositif de séparation arrête le conteneur afin que seul le simulant d'oiseau percute l'élément d'avion à l'essai. La solution pyrotechnique à double étage mise au point est validée par de nombreux tirs instrumentés en vitesse, en accélération et en pression ;elle se révèle conforme aux exigences de sécurité et de reproductibilité. Le lanceur pyrotechnique présente par rapport aux solutions pneumatiques, utilisées à notre connaissance dans tous les autres centres d'essais, des avantages indéniables de compacité ainsi que de rapidité et de souplesse de mise en oeuvre.<p><p><p>D'autre part, la migration des alliages métalliques vers les matériaux composites est amorcée depuis plusieurs années déjà dans le monde de la construction aéronautique. Pour optimiser les structures, une connaissance des caractéristiques de ces matériaux est indispensable. Les modes de rupture font partie des caractéristiques encore mal connues. La mesure du déplacement hors-plan lors du tir sur panneaux plans est une des manières de quantifier le comportement du matériau sous l'action d'un impact. Cette mesure s'opère généralement de manière statique, après le tir. Une méthode de mesure dynamique a été mise au point, basée sur l'emploi de techniques de stéréoscopie par corrélation numérique d'images. Cette technique a été validée au moyen d'une méthode métrologique indépendante d'extensométrie laser. <p><p><p>ABSTRACT<p><p>Countless collisions occur each year between airplanes and birds. Bird strike is a concern to both civilian and militay aircraft. Statistics show that, although the number of serious accidents fortunately remains low, the number of incidents keeps increasing.<p>Amongst the actors tackling this issue, aircraft manufacturers play an important role. In compliance with international regulations, they have to produce structural elements that withstand bird impact. During the development of their products, aircraft manufacturers have to demonstrate this resistance through bird impact trials :a bird surrogate is accelerated to the required velocity - often close to the nominal cruise speed of the aircraft - and launched onto a flap or a piece of fuselage.<p><p>This PhD thesis has been co-supervised by Professor Philippe Bouillard (ULB) and Professor Marc Pirlot (ERM-KMS). Its contribution to the improvement of the aforementioned dynamic trials is twofold.<p><p><p>One one hand, a two-stage pyrotechnical launcher for bird surrogates has been developed and assessed. A 20 mm caliber gun is connected to a 160 mm diameter launcher. The combustion of a propellant mixture in a cartridge case generates high pressure, high temperature gases which accelerate a bird surrogate protected by a cylindrical container. A stripper refrains the container from hitting the target pane. <p>The pyrotechnical solution has been assessed through an important number of firings where pressure, velocity and acceleration have been measured. The solution has proven compliance with both the safety requirements and the repeatability specifications. Its advantages compared to the pneumatic solutions used, as far as we know, in all other test centres, include compactedness as well as flexibility and high firing rate.<p><p><p>On the other hand, migration towards composite materials has been initiated years ago in the area of aeronautical constructions.<p>To optimize structures, a thorough knowledge of these new materials is required. Failure modes belong to the still badly known features of carbon reinforced plastics. Measuring the out-of-plane deformation when firing on a flat pane is one way of quantifying the material's behaviour under impact. This measurement is most frequently made in a static way, after completion of the firing. A dynamic measuring method has been developed, based upon stereoscopic digital image correlation techniques. This technique has been validated by means of an independent laser extensometer measuring method. <p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
Page generated in 0.0769 seconds