Spelling suggestions: "subject:"site length"" "subject:"lite length""
1 |
Performance characteristics of a deep tilling rotavatorMarenya, Moses Okoth 11 June 2010 (has links)
This study was undertaken to develop an analytical model that is capable of predicting the torque requirements of a rotavator fitted with commercially available L-shaped blades. An analytical approach based on the limit equilibrium analysis was used to develop the proposed model. The proposed model was verified by comparing the model and measured torque requirements at predetermined rotavator blade angular positions from the horizontal for a down-cut rotavator. The study findings indicated that there was an optimum set tillage depth for each rotavator configuration and operational conditions at which the resultant horizontal thrust generated was greatest. This unique depth was influenced by the bite length. The validation of the proposed model showed that the predicted and measured torque requirements, at different angular blade positions from the horizontal, correlated reasonably well for all the set tillage depths. As the depth of tillage increased, however, the curve for the measured torque requirements exhibited a cyclic behaviour after the peak torque requirements value had been recorded. The cyclic behaviour was probably due to the re-tilling and the instability of the tool-frame carrier, which increased with the set tillage depth. The knowledge contributed by this research will afford the designers of active tillage tools a better understanding of the operations of the rotavator, particularly in deep tillage. The modelling approach, and instrumentation technique used in this research, can be extended to analyze the performance of rotavators fitted with other types of commercial blades. / Thesis (PhD)--University of Pretoria, 2010. / Civil Engineering / unrestricted
|
Page generated in 0.0461 seconds