Thesis (B.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1982. / MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERING / Includes bibliographical references. / by David Roland Mustelier. / B.S.

A computational tool has been developed by integrating National Renewable Energy Laboratory (NREL) codes, Sandia National Laboratories' NuMAD, and ANSYS to investigate a horizontal axis composite ocean current turbine. The study focused on the design, analysis, and life prediction of composite blade considering random ocean current, cyclic rotation, and hurricane-driven ocean current. A structural model for a horizontal axis FAU research OCT blade was developed. Following NREL codes were used: PreCom, BModes, ModeShape, AeroDyn and FAST. PreComp was used to compute section properties of the OCT blade. BModes and ModeShape calculated the mode shapes of the blade. Hydrodynamic loading on the OCT blade was calculated by modifying the inputs to AeroDyn and FAST. These codes were then used to obtain the dynamic response of the blade, including blade tip displacement, normal force (FN) and tangential force (FT), flap and edge bending moment distribution with respect to blade rotation. / by Fang Zhou. / Thesis (Ph.D.)--Florida Atlantic University, 2013. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.

A comprehensive study was performed to overcome the design issues related to Ocean Current Turbine (OCT) blades. Statistical ocean current models were developed in terms of the probability density function, the vertical profile of mean velocity, and the power spectral density. The models accounted for randomness in ocean currents, tidal effect, and ocean depth. The proposed models gave a good prediction of the velocity variations at the Florida Straits of the Gulf Stream. A novel procedure was developed to couple Fluid-Structure Interaction (FSI) with blade element momentum theory. The FSI effect was included by considering changes in inflow velocity, lift and drag coefficients of blade elements. Geometric non-linearity was also considered to account for large deflection. The proposed FSI analysis predicted a power loss of 3.1 % due to large deflection of the OCT blade. The method contributed to saving extensive computational cost and time compared to a CFD-based FSI analysis. The random ocean current loadings were calculated by considering the ocean current turbulence, the wake flow behind the support structure, and the velocity shear. The random ocean current loadings had large probability of high stress ratio. Fatigue tests of GFRP coupons and composite sandwich panels under such random loading were performed. Fatigue life increased by a power function for GFRP coupons and by a linearlog function for composite sandwich panels as the mean velocity decreased. To accurately predict the fatigue life, a new fatigue model based on the stiffness degradation was proposed. Fatigue life of GFRP coupons was predicted using the proposed model, and a comparison was made with experimental results. As a summary, a set of new design procedures for OCT blades has been introduced and verified with various case studies of experimental turbines. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection