In this dissertation, not only the antenna and antenna array design techniques for fourth-generation mobile communication system are proposed, but also the specifications related to antenna bio-compatibility are studied. At first, two dual-wideband design techniques suitable to be applied for laptop computer applications for LTE/WWAN and LTE MIMO operations are proposed. The techniques can also be applied to internal tablet computer antennas. The isolation issues of MIMO antenna array of different mobile communication devices, such as laptop computer, tablet computer, and mobile phone, are then discussed. Finally, an analysis of body SAR for tablet computer applications are given and discussed.

In this thesis, an LTE/WWAN planar loop antenna for tablet computer with a compact size of 75 ¡Ñ 12 mm2 is presented. The planar loop antenna comprises a printed loop strip and a patch monopole encircled therein. By embedding a printed distributed inductor in the loop strip, whose effect is similar to a chip inductor, a parallel resonant mode is generated owing to the contributed inductance of the distributed inductor and the contributed capacitance of the coupling between the loop strip and the patch monopole. The parallel resonant mode leads to increase input resistance of the 0.5-wavelength loop mode at the high-frequency tail and a zero reactance nearby the original resonance of the 0.5-wavelength loop mode, thereby resulting in a dual-resonance excitation to greatly enhance the bandwidth of the antenna¡¦s lower band for the LTE700/GSM850/900 operation. In addition, the patch monopole, which performs not only as a coupling feed but also an efficient radiator, provides a 0.25-wavelength resonant mode to combine with a higher-order resonant mode contributed by the printed loop strip to form the antenna¡¦s upper band to cover the GSM1800/1900/UMTS/LTE2300/2500 operation. Further, the required distance between the antenna and the testing flat phantom to meet the 1-g body SAR requirement of 1.6 W/kg is discussed. A comparison of the body SAR value of the planar loop antenna and the bent loop antenna is also discussed.

In this thesis, a comparison of the body SAR value of five planar WLAN antennas including two coupled-fed shorted monopole antennas, a coupled-fed loop antenna, a monopole antenna, and a monopole slot antenna for tablet PC applications are presented. A required minimum distance between the antenna and the testing flat phantom to meet the 1-g body SAR requirement of 1.6 W/kg has been determined. Results show that the body SAR results of the coupled-fed loop antenna are lowest among the five tested antennas. Detailed results and discussion are presented in this thesis. Also, a comparison of the body SAR value of a planar antenna and an antenna with 3-D bent structure are presented.