M. S.

The structure and behavior of the bimodal flow of the horseshoe vortex at the nose of a wing-body junction flow was studied. The wing consists of a 3:2 elliptic nose and a NACA 0020 tail joined at the maximum thickness (t). Measurements were performed with an approach flow conditions of U_ref = 27.5 m/s, Re_θ = 6700 at x/t=-2.15, and δ/t=0.5. A rapidly-scanning two-velocity-component laser-Doppler anemometer system was developed for use in investigating this flow. U and V velocity components were measured simultaneously with surface pressure measurements at the location of the most bimodal pressure histogram (x/t=-0.26). Mean (U, V) and rms (u’, v’) velocity components were obtained at four x locations, x/t= -0.15, -0.20, -0.25, -0.30, and show the same flow features measured in previous studies at this facility. Cross-correlations between the velocity and the surface pressure fluctuations were obtained. Large correlations were found between the u fluctuations (x/t= -0.15, -0.25, and -0.30) near the wall, y/t < 0.05, and the surface pressure fluctuations. The z fluctuations for y/t > 0.1 at all four x-locations lead the surface pressure fluctuations. Space-time correlations between the velocity fluctuations near the wall with the velocity fluctuations along the scan were also obtained. The correlations at x/t=-0.25 and x/t=-0.30 show that the fluctuations in the outer region, y/t > 0.1, are significantly correlated with and lead the velocity fluctuations near the wall. These measurements support a model of a single primary junction vortex that changes size and location in front of the wing. The strength or circulation of this vortex varies by only 20%. Event-threshold conditional-averages of velocity were obtained based on the surface pressure signal, which is sensitive to the movement of the junction vortex. These show that the junction vortex is concentrated near the nose, with large backflow, when the surface pressure signal is above the mean. The junction vortex is larger, with smaller backflow near the nose, when the surface pressure signal is below the mean. The velocity-pressure cross-correlations and space-time correlations indicate that the behavior of the junction vortex is influenced by fluctuations originating upstream and propagating inward and downward toward the wing. / Ph. D.

The skin friction and cross-flow separation location on a non-body-of-revolution (non-BOR) ellipsoidal model performing constant-yaw turns and a pitch-up maneuver, each with roll oscillation were studied for the first time. The detailed, low uncertainty, flow topology data provide an extensive experimental database on the flow over non-BOR hull shapes that does not exist anywhere else in the world and serves as a crucial tool for computational validation. The ellipsoidal model was mounted on a roll oscillation machine in the Virginia Tech Stability Wind Tunnel slotted wall test section. Hot-film sensors with constant temperature anemometers provided skin friction magnitudes on the body's surface for thirty-three steady flow model orientations and three unsteady maneuvers at a constant Reynolds number of 2.5 million. Cross-flow separation locations on the model were determined from span-wise minima in the skin friction magnitude for both the steady orientations and unsteady maneuvers. Steady hot-film data were obtained over roll angles between ±25° in 5° increments with the model mounted at 10° and 15° yaw and at 7° pitch with respect to the flow. The roll oscillation machine was used to create a near sinusoidal unsteady roll motion between ±26° at a rate of 3 Hz, which corresponded to a non-dimensional roll period of 5.4. Unsteady data were obtained with the ellipsoidal model mounted at 10° and 15° yaw and at 7° pitch during the rolling maneuver. Cross-flow separation was found to dominate the leeside flow of the model for all orientations. For the yaw cases, the separation location moved progressively more windward and inboard as the flow traveled downstream. Increasing the model roll or yaw angle increased the adverse pressure gradient on the leeward side, creating stronger cross-flow separation that began further upstream and migrated further windward on the model surface. For the pitch flow case, the cross-flow separation remained straight as the flow moved axially downstream. The strongest pitch cross-flow separation was observed at the most negative roll angle and dissipated, moving further downstream and inboard as the model's roll angle was increased. The unsteady flow maneuvers exhibited the same flow topology observed in the quasi-steady conditions. However, the unsteady skin friction and separation locations lagged their quasi-steady counterparts at equivalent roll angles during the oscillation cycle. A first order time lag model and sinusoidal fit to the separation location data quantified the time lags that were observed. / Ph. D.