The scheduled replacement of the 8th North Bridge, in Salt Lake City, UT, presented a unique opportunity to test a pre-cast concrete deck, steel girder bridge. A live-load test was performed under the directions of Bridge Diagnostic Inc (BDI) and Utah State University. Six different load paths were chosen to be tested. The recorded data was used to calibrate a finite-element model of this superstructure, which was created using solid, shell, and frame elements. A comparison between the measured and finite-element response was performed and it was determined that the finite-element model replicated the measured results within 3.5% of the actual values. This model was later used to obtain theoretical live-load distribution factors, which were compared with the AASHTO LRFD Specifications estimations. The analysis was performed for the actual condition of the bridge and the original case of the bridge, which included sidewalks on both sides. The comparison showed that the code over predicted the behavior of the actual structure by 10%. For the original case, the code's estimation differed by as much as 45% of the theoretical values. Another opportunity was presented to test the behavior of a cast-in-place concrete box girder bridge in Joaquin County, CA. The Walnut Grove Bridge was tested by BDI at the request of Utah State University. The test was performed with six different load paths and the recorded data was used to calibrate a finite-element model of the structure. The bridge was modeled using shell elements and the supports were modeled using solid elements. The model was shown to replicate the actual behavior of the bridge to within 3% of the measured values. The calibrated model was then used to calculate the theoretical live-load distribution factors, which allowed a comparison of the results with the AASHTOO LRFD Specifications equations. This analysis was performed for the real conditions of the bridge and a second case where intermediate diaphragms were not included. It was determined that the code's equations estimated the behavior of the interior girder more accurately for the second model (within 10%) than the real model of the bridge (within 20%).

The Long Term Bridge Performance (LTBP) Program is a 20-year program initiated by the Federal Highway Administration to better understand the behavior of highway bridges as they deteriorate due to environmental variables and vehicle loads. Part of this program includes the periodic testing of selected bridges. The Lambert Road Bridge was subjected to nondestructive testing in the fall of 2009. Part of this testing included a live load test. This test involved driving two heavy trucks across the instrumented bridge on selected load paths. The bridge was instrumented with strain, displacement, and tilt sensors. This collected data was used to calibrate a finite element model. This finite element model was used to determine the theoretical live load distribution factors. Using the controlling distribution factor from the finite element model, the inventory and operating ratings of the bridge were determined. These load ratings were compared to those obtained from using the controlling distribution factor from the AASHTO LRFD Specifications. This thesis also examined how different parameters such as span length, girder spacing, parapets, skew, continuity, deck overhang, and deck thickness affect the distribution factors of box girder bridges. This was done by creating approximately 40 finite element models and comparing the results to those obtained by using the AASHTO LRFD Specifications.

[EN] Bridges, as an important component of infrastructure, are expected to meet all the requirements for a modern society. Traditionally, the primary aim in bridge design has been to achieve the lowest cost while guaranteeing the structural efficiency. However, concerns regarding building a more sustainable future have change the priorities of society. Ecological and durable structures are increasingly demanded. Under these premises, heuristic optimization methods provide an effective alternative to structural designs based on experience. The emergence of new materials, structural designs and sustainable criteria motivate the need to create a methodology for the automatic and accurate design of a real post-tensioned concrete bridge that considers all these aspects. For the first time, this thesis studies the efficient design of post-tensioned concrete box-girder road bridges from a sustainable point of view. This research integrates environmental, safety and durability criteria into the optimum design of the bridge. The methodology proposed provides multiple trade-off solutions that hardly increase the cost and achieve improved safety and durability. Likewise, this approach quantifies the sustainable criteria in economic terms, and evaluates the effect of these criteria on the best values of the variables. In this context, a multi-objective optimization is formulated to provide multiple trade-off and high-performing solutions that balance economic, ecologic and societal goals. An optimization design program selects the best geometry, concrete type, reinforcement and post-tensioning steel that meet the objectives selected. A three-span continuous box-girder road bridge located in a coastal region is selected for a case study. This approach provides vital knowledge about this type of bridge in the sustainable context. The life-cycle perspective has been included through a lifetime performance evaluation that models the bridge deterioration process due to chloride-induced corrosion. The economic, environmental and societal impacts of maintenance actions required to extend the service life are examined. Therefore, the proposed goals for an efficient design have been switch from initial stage to life-cycle consideration. Faced with the large computational time of multi-objective optimization and finite-element analysis, artificial neural networks (ANNs) are integrated in the proposed methodology. ANNs are trained to predict the structural response based on the design variables, without the need to analyze the bridge response. The multi-objective optimization problem results in a set of trade-off solutions characterized by the presence of conflicting objectives. The final selection of preferred solutions is simplified by a decision-making technique. A rational technique converts a verbal pairwise comparison between criteria with a degree of uncertainty into numerical values that guarantee the consistency of judgments. This thesis gives a guide for the sustainable design of concrete structures. The use of the proposed approach leads to designs with lower life-cycle cost and emissions compared to general design approaches. Both bridge safety and durability can be improved with a little cost increment by choosing the correct design variables. In addition, this methodology is applicable to any type of structure and material. / [ES] Los puentes, como parte importante de una infraestructura, se espera que reúnan todos los requisitos de una sociedad moderna. Tradicionalmente, el objetivo principal en el diseño de puentes ha sido lograr el menor coste mientras se garantiza la eficiencia estructural. Sin embargo, la preocupación por construir un futuro más sostenible ha provocado un cambio en las prioridades de la sociedad. Estructuras más ecológicas y duraderas son cada vez más demandadas. Bajo estas premisas, los métodos de optimización heurística proporcionan una alternativa eficaz a los diseños estructurales basados en la experiencia. La aparición de nuevos materiales, diseños estructurales y criterios sostenibles motivan la necesidad de crear una metodología para el diseño automático y preciso de un puente real de hormigón postesado que considere todos estos aspectos. Por primera vez, esta tesis estudia el diseño eficiente de puentes de hormigón postesado con sección en cajón desde un punto de vista sostenible. Esta investigación integra criterios ambientales, de seguridad estructural y durabilidad en el diseño óptimo del puente. La metodología propuesta proporciona múltiples soluciones que apenas encarecen el coste y mejoran la seguridad y durabilidad. Al mismo tiempo, se cuantifica el enfoque sostenible en términos económicos, y se evalúa el efecto que tienen dichos criterios en el valor óptimo de las variables. En este contexto, se formula una optimización multiobjetivo que proporciona soluciones eficientes y de compromiso entre los criterios económicos, ecológicos y sociales. Un programa de optimización del diseño selecciona la mejor combinación de geometría, tipo de hormigón, armadura y postesado que cumpla con los objetivos seleccionados. Se ha escogido como caso de estudio un puente continuo en cajón de tres vanos situado en la costa. Este método proporciona un mayor conocimiento sobre esta tipología de puentes desde un punto de vista sostenible. Se ha estudiado el ciclo de vida a través de la evaluación del deterioro estructural del puente debido al ataque por cloruros. Se examina el impacto económico, ambiental y social que produce el mantenimiento necesario para extender la vida útil del puente. Por lo tanto, los objetivos propuestos para un diseño eficiente han sido trasladados desde la etapa inicial hasta la consideración del ciclo de vida. Para solucionar el problema del elevado tiempo de cálculo debido a la optimización multiobjetivo y el análisis por elementos finitos, se han integrado redes neuronales en la metodología propuesta. Las redes neuronales son entrenadas para predecir la respuesta estructural a partir de las variables de diseño, sin la necesidad de analizar el puente. El problema de optimización multiobjetivo se traduce en un conjunto de soluciones de compromiso que representan objetivos contrapuestos. La selección final de las soluciones preferidas se simplifica mediante una técnica de toma de decisiones. Una técnica estructurada convierte los juicios basados en comparaciones por pares de elementos con un grado de incertidumbre en valores numéricos que garantizan la consistencia de dichos juicios. Esta tesis proporciona una guía que extiende y mejora las recomendaciones sobre el diseño de estructuras de hormigón dentro del contexto de desarrollo sostenible. El uso de la metodología propuesta lleva a diseños con menor coste y emisiones del ciclo de vida, comparado con diseños que siguen metodologías generales. Los resultados demuestran que mediante una correcta elección del valor de las variables se puede mejorar la seguridad y durabilidad del puente con un pequeño incremento del coste. Además, esta metodología es aplicable a cualquier tipo de estructura y material. / [CAT] Els ponts, com a part important d'una infraestructura, s'espera que reunisquen tots els requisits d'una societat moderna. Tradicionalment, l'objectiu principal en el disseny de ponts ha sigut aconseguir el menor cost mentres es garantix l'eficiència estructural. No obstant això, la preocupació per construir un futur més sostenible ha provocat un canvi en les prioritats de la societat. Estructures més ecològiques i durables són cada vegada més demandades. Davall estes premisses, els mètodes d'optimització heurística proporcionen una alternativa eficaç als dissenys estructurals basats en l'experiència. L'aparició de nous materials, dissenys estructurals i criteris sostenibles motiven la necessitat de crear una metodologia per al disseny automàtic i precís d'un pont real de formigó posttesat que considere tots estos aspectos. Per primera vegada, esta tesi estudia el disseny eficient de ponts de formigó posttesat amb secció en calaix des d'un punt de vista sostenible. Esta investigació integra criteris ambientals, de seguretat estructural i durabilitat en el disseny òptim del pont. La metodologia proposada proporciona múltiples solucions que a penes encarixen el cost i milloren la seguretat i durabilitat. Al mateix temps, es quantifica l'enfocament sostenible en termes econòmics, i s'avalua l'efecte que tenen els dits criteris en el valor òptim de les variables. En este context, es formula una optimització multiobjetivo que proporciona solucions eficients i de compromís entre els criteris econòmics, ecològics i socials. Un programa d'optimització del disseny selecciona la millor geometria, tipus de formigó, armadura i posttesat que complisquen amb els objectius seleccionats. S'ha triat com a cas d'estudi un pont continu en calaix de tres vans situat en la costa. Este mètode proporciona un major coneixement sobre esta tipologia de ponts des d'un punt de vista sostenible. S'ha estudiat el cicle de vida a través de l'avaluació del deteriorament estructural del pont a causa de l'atac per clorurs. S'examina l'impacte econòmic, ambiental i social que produïx el manteniment necessari per a estendre la vida útil del pont. Per tant, els objectius proposats per a un disseny eficient han sigut traslladats des de l'etapa inicial fins a la consideració del cicle de vida. Per a solucionar el problema de l'elevat temps de càlcul degut a l'optimització multiobjetivo i l'anàlisi per elements finits, s'han integrat xarxes neuronals en la metodologia proposada. Les xarxes neuronals són entrenades per a predir la resposta estructural a partir de les variables de disseny, sense la necessitat d'analitzar el pont. El problema d'optimització multiobjetivo es traduïx en un conjunt de solucions de compromís que representen objectius contraposats. La selecció final de les solucions preferides se simplifica per mitjà d'una tècnica de presa de decisions. Una tècnica estructurada convertix els juís basats en comparacions per parells d'elements amb un grau d'incertesa en valors numèrics que garantixen la consistència dels dits juís. Esta tesi proporciona una guia que estén i millora les recomanacions sobre el disseny d'estructures de formigó dins del context de desenrotllament sostenible. L'ús de la metodologia proposada porta a dissenys amb menor cost i emissions del cicle de vida, comparat amb dissenys que seguixen metodologies generals. Els resultats demostren que per mitjà d'una correcta elecció del valor de les variables es pot millorar la seguretat i durabilitat del pont amb un xicotet increment del cost. A més, esta metodologia és aplicable a qualsevol tipus d'estructura i material. / García Segura, T. (2016). Efficient design of post-tensioned concrete box-girder road bridges based on sustainable multi-objective criteria [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/73147 / TESIS

As part of the Long-Term Bridge Performance (LTBP) program, a flagship research program funded by the Federal Highway Administration in response to the aging bridge network, the Lambert Road Bridge near Elk Grove California was selected as the California Pilot bridge set to undergo non-destructive testing and monitoring. The purpose of the program is to obtain a database of scientific quality data concerning the health and maintenance procedures currently in use across the nation. FHWA program managers along with members of the Utah State University LTBP research team selected the bridge with the assistance of the National Bridge index and site visits. Dynamic modal analysis and long-term health monitoring are two of the test procedures that the test bridge will undergo. Dynamic modal analysis is performed by introducing a known vibration into the system and recording the response. The dynamic properties are extracted in this manner, which allows any changes in the structure to be tracked over time as the dynamic properties change. The long-term health monitoring of the bridge will include an array of sensors designed to capture the real-time structural response of the bridge under normal operating conditions at key locations. An array of 1-Hz Velocity Transducers was used to record the bridge response to the introduced vibrations. The data collected over 4 days of testing was analyzed using the "peak picking method" to locate the resonant frequencies, mode shapes, and damping ratios of the structure. In this thesis the dynamic testing results and the finite element model were compared and correlated both visually and with a modal assurance criterion. The long-term health monitoring is also discussed in this thesis. The types and reason for each sensor are presented and the installation procedure is explained and documented.

No description available.

Bridge redundancy can be described as the capacity that a bridge has to continue carrying loads after suffering the failure of one or more main structural components without undergoing significant deformations. In the current AASHTO LRFD Bridge Design Specification, two-girder bridges are classified as fracture critical, which implies that these bridges are not inherently redundant. Therefore, two-girder bridges require more frequent and detailed inspections than other types of bridges, resulting in greater costs for their operation. Despite the fracture-critical classification of two-girder bridges, several historical events involving the failure of main load-carrying members in two-girder bridges constructed of steel plate girders have demonstrated their ability to have significant reserve load carrying capacity. Relative to the steel plate girder bridges, steel box-girder bridges have higher torsional stiffness and more structural elements that might contribute to load redistribution in the event of a fracture of one or more bridge main members. These observations initiated questions on the inherent redundancy that twin box-girder bridges might possess. Given the high costs associated with the maintenance and the inspection of these bridges, there is interest in accurately characterizing the redundancy of bridge systems. In this study, twin steel box-girder bridges, which have become popular in recent years due to their aesthetics and high torsional resistance, were investigated to characterize and to define redundancy sources that could exist in this type of bridge. For this purpose, detailed finite element bridge models were developed with various modeling techniques to capture critical aspects of response of bridges suffering severe levels of damage. The finite element models included inelastic material behavior and nonlinear geometry, and they also accounted for the complex interaction of the shear studs with the concrete deck under progressing levels of damage. In conjunction with the computational analysis approach, three full-scale bridge fracture tests were carried out during this research project, and data collected from these tests were utilized to validate the results obtained from the finite element models. / text

The aim of this thesis is to design a bridge over an expressway and a railway. There have been designed three alternatives. For detailed solving was chosen variant transferring directionally divided communication by two identical bridges, formed by a cell box girder. The thesis includes drawings, representation of the construction process, visualisations and a structural analysis. Designing and checks were carried out according to European standarts.

The diploma thesis deals with alternative design of bridge on highway D1 near Považská Bystrica. Bridge is designed as composite steel-concrete bridge with 6 spans in length 35,7m + 42m + 42m + 42m + 42m + 35,7m. Overall length of superstructure of the bridge is 241m. Construction material used in design is steel S355, concrete C35/45 and reinforcing steel bars are grade B500B. Calculation of superstructure of two variants was performed in preliminary design. First variant is twin-girder structure system and box-girder structure system is second variant. Selected twin-girder bridge was developed in more complex structural design report. Direct erection in place with temporary piers was selected as assembly method of steel structure. Slab concreting will be done by mobile formwork. The design and calculation of the bridge structure was carried out according to valid European design codes. The diploma thesis includes engineering report, structural design report of variants, structural design report of final variant, bill of quantities of assembly parts and drawing documentation.

The subject of this diploma thesis is the design of a load–bearing structure, whitch is situated in the extravillain between the town of Chomutov and the village Křimov. Main purpose of this structure is to pass a roadway I/7 across the valley. There are three options of design and one of them – the prestressed box girder bridge with slanted walls is chosen for more detailed elaboration. The major load–bearing structure is five–span with lenghts 46.50 + 58.00 + 58.00 + 58.00 + 46.50 m, made of post–tensioned nad cast–in–place concrete. The total lenght of load–bearing structure is 269.00 m and the width of load–bearing structure is 13.50 m, the bridge is straight in plan. The structure is analyzed by several computational models, which are designed in Scia Engineer 20.0 software. The structure is analysed in longitudinal and cross directions. The assessments of load state limit and usability limit state are made according to valid standards. This thesis also included time dependent analysis (TDA), that takes construction stage analysis into account.

The aim of this work is design and assessment of the box-girder road bridge on by-road of Bludov. Bridge is designed as composite steel concrete bridge with 5 spans with distances between supports of 31,25 m; 40,0 m; 60,0 m; 60,0 m and 40,35 m. Main bearing structure is designed as open steel box-girder with reinforced concrete deck. Box girder is braced with longitudinal and transversal bracings. Main structure is separated for each traffic direction. The bridge crosses river Morava and railway in 2nd and 3rd span, respectively. The category of road I/44 is S 21,5/100. The height of steel box girder is designed as 2,5 m. Bridge will be built by incremental launching method, with in-situ casted concrete deck afterwards. The bridge is designed according to current standards. Supporting elements are designed from steel of class S 355 and concrete of class C35/45.