Inaug.-diss.--Leipzig. / Lebenslauf. "Literatur-verzeichnis": p. 73.

Thesis (B.S.)--University of Missouri, School of Mines and Metallurgy, 1935. / The entire thesis text is included in file. Typescript. Title from title screen of thesis/dissertation PDF file (viewed June 9, 2010) Includes bibliographical references (p. [29]).

Thesis (M. Sc.)(Geology)--University of Pretoria, 2006. / Includes bibliographical references. Available on the Internet via the World Wide Web.

The focus of the study was two-fold, firstly to determine the effect of age on the capacity of manual materials handling workers and secondly to determine the effect of increasing task mechanisation on the workers’ responses to task demands. The first component of this study, namely Part I, 101 male and 12 female ‘unskilled’ manual workers – of various ages – from a brick manufacturing industry were assessed. Anthropometric, health and strength factors were measured to improve the understanding of the South African manual worker capacity and more specifically, the effect of age on this capacity. Data collection was done between 7.30am and 9.30am in a laboratory-type setting on-site. Anthropometric characteristics (including body mass index, waist to hip ratio, waist circumference and body fat percentage) provided information on the state of obesity and the impact of age in the South African context. Linked to this, the health factors (including blood pressure, resting heart rate and a self-reported questionnaire) provide an extra snapshot of the disease profile in South Africa, and could potentially influence other capacity factors. Isometric strength capacities (of eight different areas, namely: back, leg, bicep, shoulder, pinch, pinch and pull) demonstrated whether South African manual workers show the same decline in strength with aging as seen in industrially advanced countries. The second component of the study, Part II, was performed in situ and measured the workers’ responses to task demands of three brick palletising tasks, one manual (n=21) and two with increasing mechanisation (n=12 each). Spinal kinematics, joint forces and working heart rate were assessed on normal work days during a 30-lift duration and body discomfort measures were taken at the start, middle and end of the work-shift. Spinal kinematics were measured dynamically using a lumbar motion monitor, whereas the spinal forces were estimated using the three dimensional static strength prediction program. The worker capacity results showed that waist to hip ratio, waist circumference and body fat percentage increased significantly with aging, whereas body mass index was not affected by age. All body morphology values were within ‘normal’ ranges. Although diastolic blood pressure increased significantly with age, systolic was not affected significantly by age. Both groups, however, showed an increasing prevalence of hypertension with aging. There were no significant changes in resting heart rate with aging, with a range of 66 bt.min⁻¹ to 74.86 bt.min⁻¹, therefore within normal ranges. Of the strength factors, age only affected shoulder and push strength significantly: Showing a decrease in shoulder strength from 49.89 kgF to 39.91 kgF in the men aged 20-29 to the 50-59 respectively and an increase in push strength from men aged 30-39 and 40-49 to those aged 50-59. Part II results revealed highly frequent lift rates and large degrees of sagittal flexion and lateral bending in all three tasks. These postures adopted for long durations are likely to lead to the development of musculoskeletal disorders. Heart rates of workers from the three tasks were significantly different and heart rates for two tasks were above the recommended 110 bt.min⁻¹. Similarly the body discomfort ratings of the three tasks differed, although a common trend was seen in that lower back pain was the most commonly reported area of discomfort in all tasks. South African manual materials handling males did not show the same responses to aging as men from industrially advanced countries, calling for further research into these differences. Due to the high risks of the three tasks assessed, future research and interventions are required to reduce the risk of injury in the assessed tasks.

Thesis (MBA)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: For decades black South Africans suffered under apartheid, being excluded from active participation in the South African economy. Following the first democratic election in 1994, which was won by the African National Congress, the new government immediately made clear its intentions to transform the economy by including all the South Africans citizens. In 2004 the government promulgated the Broad-Based Black Economic Empowerment Act (BB-BEE), which aimed to redress the wrongs of the past and to realise the country's full economic potential whilst assisting the black majority to become part of the economic mainstream. The BB-BEE act focused primarily on the upliftment and empowerment of historically disadvantaged people, particularly black people, women, the youth and the disabled and on those living in rural communities; it aims to include these people in the management and ownership structures of South African companies. The clay brick industry, one of the oldest industries in the world, had been severely affected by the introduction of the legislation, as 75% of businesses were predominantly family owned, and 69.39% of them are predominantly white owned. The primary objective of this research assignment was to investigate the impact of Broad-Based Black Economic Empowerment (BB-BEE) on the South African clay brick industry and to make recommendations to the various stakeholders regarding the management of the introduction of BB-BEE into the industry. The methodology followed a survey approach by using specific indicators to ascertain what the perceptions and experiences of the business owners were, regarding the implementation of BB-BEE in the industry. The study found that the business owners were concerned about losing control of their businesses, that there is very little support from government for businesses entering into BB-BEE deals and that it is difficult to find the “right” empowerment partner which “fits” the culture and management style of the business. The study concluded that much uncertainty, fear and anxiety exists amongst business owners regarding the introduction of BB-BEE. The study also makes practical recommendations to the various stakeholders who may assist with facilitating the introduction of BB-BEE in the industry.

1. There is a crisis in economics. The discipline evolved in nineteenth century Europe and is difficult to adapt to modern conditions, even in the West, and particularly in alien cultures. Application of conventional economic analysis to economic activity in a culture as alien as traditional China highlights the biases in assumptions of the paradigm. 2. The concepts, models and vocabulary evolved over one hundred years ago predate important developments in the natural sciences. It is now necessary for economists to concede no goods can ever be 'produced', and they are not 'consumed' either. In clear terms matter is transformed, but is not created or destroyed (First Law of Thermodynamics). 3. When people transform matter, in lay language we say energy is 'used'. In a simple cottage industry, 'raw material' is transformed into a commodity in front of our eyes by the use of human energy and the release of energy from a 'fuel'. In modem complex economic activity, it is difficult or impossible to keep track of the processes from raw matter to transformed 'product' although the principle is the same. 4. The Second Law of Thermodynamics states that in any transformation, energy is not created or destroyed, but becomes 'less available'. In short, entropy increases. This appears to work well for pure physics and chemistry, but its application to analysis of economic activity has only been notional. 5. There is a reason why economists borrowing terms from hard science experience difficulty. It is because physicists and chemists have addressed specific laboratory and engineering problems, but not the broader economic issues. The hypothesis gradually evolved in this research program that not only economic concepts and terms needed reworking, but those in physics as well. The definitions of energy as 'ability to do works and of entropy as 'unavailable energy' jar the logic of our commonsense. 6. The notion of 'available energy' was traced back to the phenomenon in physical chemistry known as exothermicity, or the release of energy during a chemical reaction. It was reasoned that while scientists had focussed on this phenomenon and measured it carefully they saw no need to ask where the energy came from, or to measure its transformation. From the perspective of analysing economic activity, the question was important. 7. It was hypothesised that the energy released from a fuel as electromagnetic radiation (mainly heat) was the residual of the set of coulombic forces within atoms that maintain the structure of shells of electrons around the protons. This idea in turn came from the presumption that molecular bonding is a residual of vectors of the set of coulombic forces within atoms, and the likelihood that in an exothermic reaction, after the reactants are said (by scientists) to 'seek equilibrium', product molecules have a portion of the coulombic forces 'left over' and not required to maintain their structures. An estimate was made of the coulombic forces extant in various fuels, and compared with the known data for their release of energy. 8. The idea was developed in detail. The concept we call in economics, 'production', and should call 'transformation' can only occur when forces locked within atoms are released as electromagnetic forces. (Gravitational forces exist because matter has been put 'there' by electromagnetic radiation). When 100 grams of dry grass fuel is burnt, about 2 megajoules of electromagnetic radiation are released. It was estimated that the coulombic forces between each electron and proton in that amount dry grass total 150 gigajoules (or giganewtons, since the reference is to forces). 9. Within the boundary of a simple economic activity, the ratio of aggregated coulombic forces locked up within atoms to the electromagnetic forces radiated out was estimated at the beginning of the activity, and then after a duration. The ratio of forces always tends towards 'evening out'. This measurement captures the entropy phenomenon which has been said by Georgescu-Roegen to be the basis of all economic activity. 10. At the roots of the economic paradigm founded by Adam Smith is the premise that the material world, as a set of substances, is a stage on which economic actors 'add value', bid prices up and down, and by their rational perception manage their livelihoods and surroundings well. From the findings of this research program it is contended that the surroundings of economic actors can be classed into two categories: locked up (coulombic) electromagnetic forces, and radiated electromagnetic forces. The former has a tendency to convert to the latter. All action, including all economic activity, and all life can be traced to a point in space and time where this conversion is (naturally) occurring. The phenomenon is analogous to a slope where water cascades, and gravitational potential energy converts to other (either useless or useful) forms of energy. To appreciate the nature of this phenomena, and to attempt to fathom its dimensions, sets our perceptions of ourselves as economic actors in a quite different and very humbling context.

MESMEG / Department of Mining and Environmental Geology / Although clay brick manufacturing has been going on for many years in South Africa, informal small-scale clay brick manufacturing enterprises are not officially regulated. Consequently, informal brick makers in the study area do not adhere to the demanding requirements of the South African National Standards for burnt clay masonry. Therefore, their clay bricks lack uniformity in terms of quality. Preliminary work revealed that over time, buildings constructed with these bricks develop cracks, thereby compromising safety. The importance of product quality management is not well understood in the informal brick manufacturing enterprises. As a result, they do not have any product quality management guidelines. The main purpose of this research was to develop the product quality management guidelines for ensuring quality in small-scale brick making enterprises in Dididi area. The specific objectives were to characterize the raw materials for clay brick manufacturing, identify and assess the technical problems of clay brick production, analyse the process of clay brick production and determine areas where product quality improvement is warranted. The research involved fieldwork which included soil sampling, analysis of clay brick production through the use of questionnaires and onsite observation of the production process, collection of samples of burnt bricks which were examined for compressive strength, water absorption as well as dimension measurements. These were then compared with the prescribed quality standards. Laboratory analyses of samples of raw materials were conducted and these included sieve analysis which was conducted in order to establish the particle size distribution of the raw materials; Atterberg limit tests were conducted in order to establish the physical characteristics of the soil. Chemical and mineralogical analyses were carried out to determine the chemical and mineralogical composition of the soil using XRF and XRD respectively. The textural characterisation of the material revealed abundance of sand sized particles and significantly low amounts of clay and silt. The plasticity of the soil used for bricks manufacturing in the study area was found to be ranging from slight to medium plasticity. Chemical analysis showed elevated silica contents with minor amounts of alumina and iron oxide. XRD analysis revealed the dominance of non-clay minerals with the highest concentration of quartz. The average compressive strengths of the tested brick samples for site A was 3.8, and 2.9 and 3.8 MPa for sites B and C respectively. The water absorption of the bricks was 13.5, 15.0 and 16.1% for samples from Site A, B and C respectively. The bricks dimensions met the recommended standards although their sizes were not uniform. v The survey conducted on brick manufacturing process revealed that the technical inefficiencies were mostly influenced by human and mechanical factors as well as the material inappropriateness. The production process was found to be too manual and labour intensive. Selection of the raw materials for brick manufacturing was based on indigenous knowledge and experience and most of the brick manufacturers lacked the prerequisite experience for making quality bricks. On the basis of the results of this research, it can be concluded that the materials used for manufacturing of clay bricks in Dididi are not well suited for making good quality bricks due to the reduced plasticity of the soil and the high concentration of quartz. These render the bricks brittle. It was also concluded that the production process also contributes to the poor quality of the bricks as the nature of the process was too manual. Selection of materials based merely on knowledge and experience and no scientific tests resulted in selection of inadequate materials which in turn affect the quality of the final bricks. It is therefore recommended that plastic clays be added to the raw clay materials to enhance its moulding property. In addition, materials such as internal fuels and anti-shrinkage materials should be incorporated into the process cycle to prevent cracking during drying and firing. Based on the findings of the analysis of the production process, it is recommended that mechanized techniques be employed in the operation and awareness training conducted to improve the understanding and skills of the brick manufacturers and to ensure production of good quality bricks. / NRF