Master´s thesis deals with the project documentation of the design of the new building hall of production. This hall is situated in Slapy at Tábor. Design and appendix´s were made by the present valid laws, goverment´s restrictions and standards. This object is placed in ground plot number 104/12, the land cadastre of Slapy at Tábor. The building object is designated for factory and storage area. Next to the building plot carry underground services. In the building object is factory hall and cloakroom for 2-4 employes. Director´s flat is in first floor. Building has two floors and floor plan 12,5 x 30,5 m on final grade. The carrying systém is from hollow building brick. The building has gable roof. Specialization is processed on „heating the building“ witch forms separate annex of Master´s thesis.

The project involves the design and solution of restaurant with microbrewery and accommodations. This is a new building on the land plot no. 2739, which is located in Golčův Jeníkov and situated in the middle of plat. Entrance to object and disposition inside the building is has barrier-free solution. Restaurant with microbrewery is designed for a capacity of 120 people in restaurant and 30 places to sit in lounge bar. Total capacity of boarding house is 21 beds. One double room is designed has barrier-free solution. Structural system of restaurant with microbrewery is combined, which is formed in one part of precast concrete frame S 1.2 and in other part of wall structural system. They are designed reinforced concrete columns about dimensions 0,4x0,4 m with axial distance 6x8 m. Masonry part of the building and infill wall in above-ground floors is lined with ceramic blocks of the type therm. Infill wall in the basement is formed of permanent formwork. The building is insulated a contact thermal insulation with an insulation of thickness 130 mm. Internal loadbearing and non-load-bearing wall in basement and in first floor are lined with ceramic blocks type therm and in second floor they are designed plasterboard partitions. The building is covered with a warm flat roof. Loadbearing structure of roof and ceilings structure are formed prestressed concrete floor slabs SPIROLL. Floor assembly is burdened with river stones of thickness 120 mm.

The diploma thesis is a project of an apartment block with a total number of 10 apartments. The building is located in the cadastral areas of Žirovnice 797154 on the numbers of parcels 653/1, 634/1, 634/2. The building is a five-storey building with four floors above the ground and one underground floor. Floors are designed as a brick system with the contact insulation. Underground floor consists of a reinforced concrete wall monolith which is based on the footings. Horizontal structures are made up of prefabricated ceramic system Miako and a reinforced concrete monolithic slab. The roof is flat and single-layer. The floors are connected by monolithic reinforced concrete staircase and an elevator which is located in the shaft.

This Master´s thesis is focused on block of flats project documentation, claims for fire safety and thermal and acoustic properties of structures. The brick building is detached and has three floors without basement. These floors are connected by a lift. The block of flats is based on the footings, external walls are insulated by a contact thermal insulation system. The tent roof is consists of truss in two levels. The building is designed for nine flats and one of these flats is wheelchair accessible. Truss design is also a part of the project.

The topic of this master´s thesis deals with a structural and technological preparation of implementation of apartment building in Jihlava. The Apartment building is designed as a building including garages and dwelling units. In the lower part of the building is constructed of reinforced concrete combined system, which is from the 2.PP to 2.NP. The building is designed as a brick system with concrete ceilings on the upper floors. The lower 3 floors are designed as parking garage and a remaining six floors are designed as apartments. The project deals with the entire construction of buildings from technological processes, time and financial plan to safety during construction.

The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.