1 |
Separation of water out of highly concentrated electrolyte solutions using multistage vacuum membrane distillationJiang, Bin January 2013 (has links)
Absorption dehumidification requires regeneration system to regenerate diluted desiccant solutions, which are still highly concentrated. A novel multi-stage vacuum membrane distillation system was applied for separating water out of the highly concentrated solution. The performance of this novel membrane distillation system with high concentration solution is studied, as well as the effect of solution concentration, heating temperature and feed flow rate on concentration increase, permeate flux and specific energy consumption was studied. Feed solutions are LiCl solution (22-30 wt%) and CH3COOK solution (50-60 wt%).Other experimental parameters studied were: heating temperature, 70-80 °C, feed flow rate, 1.2-2.0 l/min. Response surface method is applied for model building, in order to provide a better understanding of the interactions between different parameters. Compared with pure water, high concentration solution has lower vapor pressure, which leads to lower permeate flux. The highest concentration the system can reach is 36.5 wt% for LiCl solution and over 70 wt% for CH3COOK solution, when the heating temperature is 80 °C. Lower concentration and higher heating temperature will result in larger increase in concentration, higher permeate flux and also lower specific energy consumption. But due to the configuration of the system, optimal flow rates can be found under different conditions. Within the testing region, the permeate flux ranges between 0.147-1.802 l/(m2h) for LiCl solution and 0.189-1.263 l/(m2h) for CH3COOK solution. With low concentration, high heating temperature and low feed flow rate, low specific energy consumptions, 0.85 kWh/l and 0.94 kWh/l for LiCl and CH3COOK solutions are observed respectively. With external heating recovery system, this value can be further reduced.
|
Page generated in 0.0106 seconds