1 |
Electrical transport properties and magnetism of Cr-Mo-Ru alloysHigh, Grant Lysle 23 July 2014 (has links)
M.Sc. / Please refer to full text to view abstract.
|
2 |
Continuous codeposition of chromium-nickel and chromium-nickel-iron alloys from aqueous amide electrolytesEl-Sharif, M. R. January 1987 (has links)
There are numerous reports of attempts to deposit thick coatings of chromium-nickel and chromium-nickel-iron and although high quality deposits have been obtained these have been limited to very thin coatings only. The purpose of the present work was to identify and understand the controlling factors preventing continuous deposition and the build-up of thick coatings, and to develop a suitable process for such thick coatings. An amide electrolyte system was chosen asworking model for its relative simplicity and the high quality chromium-nickel deposits obtained from this system. This bath was investigated initially using conventional operating techniques (Constant Current) to establish its general characteristics. High quality deposits were obtained for thin coatings only. The need for a major change of operating philosophy was identified as essential. A number of published hypotheses explaining the failure of continuous deposition were experimentally tested and shown not to apply. Electrolytically generated chromium (II) has been identified to be an important controlling factor on the quality and composition of chromium-nickel alloys codeposited from amide electrolytes. The control of the low transient chromium (II) level, necessary for the maintenance of high quality codeposition with constant composition, can be achieved as follows. A controlled potential is required, in combination with circulation and agitation of the electrolyte and the generation of the chlorine gas as the preferred anodic product. The combination of the three techniques is necessary for the control of chromium (II) and if any of the three techniques are not employed sustained deposition fails. Chromium (II) has further been identified to catalyse an electrochemical ageing of the bath. Reproducible high quality true metallic deposits of constant composition of chromium-nickel and chromium-nickel-iron can be obtained to a thickness of several hundred microns. These have shown to display a laminar structure on etching and possible causes have been considered. Mossbauer spectroscopy and x-ray diffraction have shown that chromium-nickel-iron deposits contain a significant quantity of micro-crystalline austenite phase ~, fcc) with a dominant ferrite (e<, bcc) phase.
|
3 |
Expitaxial films of chromium dioxide from a new precursor (Cr8O21) and research on their application in spin-electronic devicesIvanov, Pavel G. Lind, David. January 2002 (has links)
Thesis (Ph. D.)--Florida State University, 2002. / Advisor: Dr. David Lind, Florida State University, College of Arts and Sciences, Dept. of Physics. Title and description from dissertation home page (viewed Sept. 29, 2003). Includes bibliographical references.
|
4 |
Biegefestigkeit von Kobalt-Chrom-Legierungen bei zehnfachem WiedervergussWill, Eberhard, January 1987 (has links)
Thesis (doctoral)--Universität Köln, 1987. / Vita. Includes bibliographical references (p. 71-75).
|
5 |
On the casting of dental Co-Cr alloysStrandman, Erik. January 1976 (has links)
Thesis--Göteborg. / Includes reprints of author's articles.
|
6 |
On the casting of dental Co-Cr alloysStrandman, Erik. January 1976 (has links)
Thesis--Göteborg. / Includes reprints of author's articles.
|
7 |
Die magneto-elastiese gedrag van verdunde CR-MO-allooieVenter, Andrew Michael 23 September 2014 (has links)
M.Sc. (Experimental Physics) / Please refer to full text to view abstract
|
8 |
Magnetiese eienskappe van Cr-allooieVan Rijn, Hendrik Johan 12 August 2014 (has links)
Ph.D. (Physics) / Please refer to full text to view abstract.
|
9 |
Anharmonic effects in a Cr + 1.9 at.% Fe alloy single crystalDerrett, Helen Anne 03 September 2012 (has links)
M.Sc. / Spin-density-wave (SDW) effects are investigated in a Cr + 1.9 at.% Fe alloy single crystal, where the Fe concentration lies just below the triple point found in the temperatureconcentration magnetic phase diagram of the Cr-Fe alloy system. The crystal is expected to undergo a commensurate (C) SDW to an incommensurate (I) SDW phase transition at a temperature Tc, and an ISDW-P (paramagnetic) phase transition at the Neel temperature, TN. The magnetoelastic properties and the anharmonic behaviour of this crystal were studied with the aid of velocity of sound measurements as function of temperature and pressure. Electrical transport measurements were carried out using the standard fourprobe method. In order to determine the various phases present in the crystal a preliminary neutron-diffraction study was also done. Fe belongs to the group-8 magnetic transition metals, possessing localized magnetic moments. The SDW effects in the Cr + 1.9 at.% Fe crystal are therefore compared with that of Cr-Ru and Cr-Ir alloys, as Ru and Ir also belong to the group-8 transition metals, however these impurities are nonmagnetic. The following observations were made: The longitudinal mode elastic constants and the bulk modulus show a prominent change in the slope at Tc, and a sharp, deep minimum at TN. For the c' shear propagation mode peaks were seen at Tcl as well as TN and the c4 4 propagation mode showed no anomalies at either phase transition temperatures. The longitudinal ultrasonic wave velocities for the cL propagation mode were measured as a function of temperature at different constant pressures. TN obtained from these measurements varies linearly with increasing pressure. High-pressure ultrasonic wave velocity measurements were taken at various constant temperatures in the range of 230 K to 350 K for the C L, c44 and c' propagation modes of the Cr + 1.9 at.% Fe alloy single crystal. This was used to determine the pressure derivatives of the second order adiabatic elastic constants (acu /ap). The pressure derivatives of the second order adiabatic elastic constant are shown to be a very powerful tool for investigating the interaction of the SDW with the acoustic phonons in the Cr-Fe crystal. II The long-wavelength acoustic-mode Gitmeisen parameters, calculated from (acu/ap), showed that the SDW in the Cr + 1.9 at.% Fe alloy single crystal couples mainly with the longitudinal acoustic phonons. Coupling to the shear modes is relatively small. The mean acoustic-mode GrOneisen parameter shows a small maximum between Tc, and TN. It increases on heating through TN, reaching a large maximum value above TN, and then decreases with further increase in the temperature. The electrical resistivity was measured_in the temperature region of 4 Kt() 900 K in order to obtain the nonmagnetic component of the resistivity at all temperatures. Only the Neel phase transition was observed in these measurements with no resistivity anomalies taking place at -Va. The experimental results on the resisitivity were analyzed according the model of Chui et al.. The magnetic component of the electrical resistivity was calculated from the model with and without the inclusion of the effects of resonant impurity scattering of the conduction electrons by the local impurity states lying in the SDW energy gap. The magnetic contributions were found to be appreciable above TN, even up to temperatures as high as 1.5TN. The neutron-diffraction experiments show that the Cr + 1.9 at.% Fe crystal remains in the ISDW phase at all temperatures below TN. This is an unexpected result as a CSDW-ISDW phase transition is expected at To, the temperature of the observed anomaly in elastic constant and thermal expansion measurements on the crystal
|
10 |
The significance of the "protection ptoential" for Fe-Cr alloys at room temperatureStarr, Kenneth Kirch, January 1973 (has links)
Thesis--University of Florida. / Description based on print version record. Typescript. Vita. Bibliography: leaves 342-356.
|
Page generated in 0.0386 seconds