1 |
Treatment of Chemical Mechanical Polishing Wastewater by a Simultaneous Electrocoagulation/Electrofiltration ProcessChen, Fu-Cheng 10 February 2004 (has links)
In this work, a novel treatment module capable of simultaneously enacting electrocoagulation and electrofiltration was designed, fabricated, and tested aiming for the reclamation of CMP (chemical mechanical polishing) wastewater. In general, CMP wastewater contains sub-micron particles and has high alkalinity, turbidity, total solids content, and silica content. Discharge of CMP wastewater without proper treatment would pose a great threat to the environment and ecology. In this investigation, oxide CMP wastewater and mixed CMP wastewater were obtained from a wafer fab in Taiwan. They were characterized by various standard methods. In this study, the efficiency of this dual-function treatment module (using aluminum as the sacrificing anode and stainless steel as the cathode) was evaluated in terms of applied electric field strength (0 ~ 112.5 V/cm), influent velocity (112 ~136 cm/s), and transmembrane pressure (1.0 ~ 3.0 kgf/cm2) on permeate qualities. Experimental results have shown that the contents of total solids of permeates could be reduced to about 180 mg/L and 426 mg/L, respectively for oxide CMP wastewater and mixed CMP wastewater. The respective values of turbidity and total organic carbon could also be reduced to below 1 NTU and 1.5 mg/L. Therefore, the treated water could be reused as the feed water for the ultrapure water production system. In this study, an empirical equation was established to relate the quantity of filtrate and applied electric field strength when CMP wastewater was subjected to electrofiltration alone. It was found that the theoretical aluminum concentration released to the reaction chamber was much greater than the actual one. This would explain why the efficiency of electrocoagulation needs to be improved in this treatment module. Experimental results also have indicated that proper backflushing would be beneficial to the flux of permeate and saving of membrane cost.
|
2 |
Treatment of Cu-CMP Waste Streams Containing Copper(II) using Polyethyleneimine (PEI)Maketon, Worawan January 2007 (has links)
The semiconductor industry has been growing at a fast pace in the last several decades and this growth is expected to continue in the future. One process that is repeated several times in a microchip fabrication is the Chemical Mechanical Planarization (CMP). CMP is a critical process that must be employed after the metal deposition step to eliminate any topography over which the next layer must be processed. Today, copper interconnect is widely used. In addition to possess a high resistance to electro migration effects and low electrical resistivity, copper techniques require fewer (approximately 25%) processing steps. CMP and post-CMP cleaning processes are projected to account for 50 percent of the water consumed by fabrication's ultra pure water. While there are a variety of treatment schemes currently available for the removal of heavy metals from CMP wastewater streams, many introduce additional chemicals to the process, have large space requirement, or are not effective. Polyethyleneimine (PEI) is well known to use in the ion metal affinity chromatography (IMAC) due to the great metal ion binding abilities. While work has been conducted on the use of PEI on membrane filtration for binding metals from industrial wastewaters, the experiments performed in this research are novel with respect to the waste (Cu CMP) treated as well as the method of packed bed column treatment. This research focused primarily on the study of an alternative technique to remove both metal ions and metal-chelated complexes from Cu CMP wastewater streams. Not only copper, wastewater often contains chelating agents, surfactant, organic compounds, and inhibitors. Thus, most of the time copper ions form complexes with chelating agents, which made typical ion exchange resins ineffective. The work, then, explored the effect of components typically found in Cu CMP waste streams on the binding of copper ions to PEI. The competitive binding of copper between PEI and other complexing agents were also investigated. A secondary focus of this study was to fully develop and characterize the column performance and behavior. This includes the understanding of the chemistry of CMP waste characterization. This treatment technique using a PEI packed bed column showed great copper binding capacity. The column is capable of removing Cu CMP waste streams, which contain both copper ions and copper complexes, due to the unique ability of PEI that can play both cation and anion exchanger roles. This waste treatment technique is feasible for the semiconductor industry as large volumes of copper contaminated solutions from actual waste can be concentrated twelve-fold for metal recovery using hydrochloric acid. The adsorbent can be regenerated more than hundred of times with changing in the performance and the reproducibility.
|
Page generated in 0.0666 seconds