This work deals with lead-acid batteries operating in hybrid electric vehicles mode, i.e. in a partial state of charge. The adverse effects such as premature capacity loss and large internal resistance can markedly affect the life of a lead battery. The experiment described in this work aims to clarify the influence of the titanium dioxide in the active mass of negative electrodes especially in the life of lead acid batteries.

Master´s thesis deals with the utilization of lead-acid accumulators in hybrid electric vehicle regime. It describes the side effects known as PCL, generated during PSOC regime and connected with the length of the battery lifespan. One possibility how to eliminate these effects, is the use of additives in active mass of the negative electrode, in the form of glass fibres. The project provides the parametres and reactions of additive, that have lead to the improvement of battery properties. The purpose of this thesis is to verify the positive effect of the aditive on the lifespan of the lead-acid accumulator.

This thesis deals with issues of the issue lead-acid batteries and their application in mode of hybrid electric vehicle. The experiment is focused on the production of electrodes to determine the effect five types of additives in negative active mass in PsoC(Partial State of Charge) mode. This simulates conditions occurring in the mode of hybrid electric vehicles (HEV).

The rapidly growing demand for UWB as high data rates wireless communications technology, since the Federal Communications Commission (FCC) allocated the bandwidth of UWB from 3.1GHz to 10.6 GHz. Antenna also plays an essential role in UWB system. However, there are some difficulties in designing UWB antenna as compared to narrowband antenna. The primary requirement of UWB antennas is be able to operate over frequencies released by the FCC. Moreover, the satisfaction of radiation properties and good time domain performance over the entire frequency range are also necessary. In this thesis, designing and analysing printed crescent shape monopole antenna, Planar Inverted F-L Antenna (PIFLA) and Planar Inverted FF Antenna (PIFFA) are focused. A Planar Inverted FF Antenna (PIFFA) can be created to reduce the potential for interference between a UWB system and other communications protocols by using spiral slot. The antennas exhibits broadside directional pattern. The performances such as return loss, radiation pattern and current distribution of the UWB antennas are extensively investigated and carried out. All the results have been demonstrated using simulation and experimentally whereby all results satisfy the performance under - 10dB point in the bandwidth of UWB. In addition the miniaturization of MIMO/diversity Planar Inverted-F antenna (PIFA) which is suitable for pattern diversity in UWB applications is presented. This antenna assembly is formed by two identical PIFAs, a T-shaped decoupling structure which connects the two PIFAs and a finite ground plane with a total compact envelope dimension of 50 ¿ 90 ¿ 7.5mm3. The radiation performance of the proposed MIMO antenna was quite encouraging and provided an acceptable agreement between the computed and measured envelope correlation coefficient and channel capacity loss. / General Secretariat of Education and Scientific Research Libya