Thesis (Ph. D.)--University of Alberta, 2010. / Title from pdf file main screen (viewed on June 18, 2010). A thesis submitted to the Faculty of Graduate Studies and Research in partial fulfillment of the requirements for the degree of Doctor of Philosophy, Department of Chemistry, University of Alberta. Includes bibliographical references.

This thesis is centered on the Gadonanotubes (GNTs), an ultra-high-performance magnetic resonance imaging (MRI) contrast agent material discovered in our laboratories in 2005. The GNTs are a new paradigm in MRI contrast agent design with small clusters of Gd3+ ions within ultra-short carbon nanocapsules (ca. 50 nm) cut from full-length single-walled carbon nanotubes. Here, the factors underlying the performance efficacy of the GNTs have been investigated for the first time by variable-field (-50,000 Oe to 50,000 Oe at 2K) and variable-temperature (2K to RT at 100 Oe) magnetic susceptibility measurements using a Magnetic Property Measurement System (MPMS, based on a SQUID magnetometer). Additionally, experiments focused on the effects of hydroxylation of the GNTs’ exterior surface regarding water-solubility are examined. Finally, the use of the GNTs as potential replacements for traditional metal-chelating/sequestering agents is explored. More specifically, the internal Gd3+-ion clusters of the GNTs have been radiolabeled: (1) with 153Gd3+ ions to test Gd3+-ion stability to simulated biological challenge, (2) with 225Ac3+ ions to generate a new concept for a GNT-based agent for α-radiotherapy, and finally (3) with 64Cu2+ ions to produce the first bimodal MRI/PET (PET = positron emission tomography) imaging agent derived from the GNTs.

The unique electronic, mechanical and physical properties led Carbon nanotubes (CNTs) to be potential candidate for field emitter, hydrogen storage, sensors, nano electronic devices, nano electromechanical systems, polymer composites. In order to make them in the industrial scale we need large quantity production of CNTs with low cost. The present thesis work deals with the preparation of CNTs by pyrolysis method from xylene and further studies on the grown CNTs. Magnetic characterization of CNTs has been done using SQUID. The interaction of CNTs with the microwave irradiation is studied and it was found for the first time that there is light emission from the CNTs apart from direct electric field. In this process we also observed that the static charge develops on the CNTs. A composite of CNTs/DNA has been prepared with varying CNT content and the electrical conductivity measurements have been done. The first chapter of the thesis provides an introduction to carbon family. Carbon nanotubes, which are potential candidates from carbon family, is a growing field for research in science and technology. A glimpse of various methods of preparation of CNTs like arc-discharge, laser ablation, chemical vapour deposition (CVD), hot-filament CVD, plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance (ECR PECVD), high-pressure catalytic decomposition of carbon monoxide (HiPCO), pyrolysis are discussed. Some applications of CNTs are also included in this chapter. The second chapter deals with the experimental techniques employed for the preparation of CNTs and their characteristics studied by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD) and Raman Spectroscopy (RS). The preparation of CNTs from xylene as carbon source and ferrocene as catalyst in pyrolysis method is described in detail. Well aligned CNTs with a length of several tens of micrometers and diameter of 40 to 80 nanometers were obtained as confirmed by SEM. TEM and XRD confirms the graphitic crystal structure of the CNTs. RS also confirms the information about the crystal structure. The third chapter discusses the magnetic studies on CNTs using Superconducting Quantum Interference Device (SQUID) as a function of magnetic field and temperature. In the random mixture of parallel, perpendicular and oblique nanotubes, the applied field produces diamagnetic behavior, although the sample possess different kinds of tubes with various chirality and radii. Paramagnetic deviation was observed on the diamagnetic susceptibility at weak fields and low temperature, confirming qualitatively with the Aharonov-Bhom effect on the energy gap for the magnetic field parallel to the tube axis Chapter four presents the light emission from the CNTs. It describes the light emission from different processes reported in the literature. Here we have observed a new process to generate light from CNTs through microwave irradiation. Along with the light emission some of the tubes get charged and some tubes are physically broken. We provide a simple approach as to why the tubes break and the nature of the breakage is also discussed. The fifth chapter discusses the preparation of CNTs/DNA composites. The conductivity increases with increasing carbon nanotube weight percentage. The increase in conductivity as a function of the CNTs weight percent is attributed to the introduction of conducting CNTs path in the DNA matrix. A summary of the results obtained and the scope for future work are included in the chapter six of the thesis.

Graphene – a two-dimensional honeycomb lattice of sp2-bonded carbon atoms – has been attracting a great deal of research interest since its first experimental realization in 2004, due to its various novel properties and its potential for applications in futuristic nanodevices. Being the fundamental building block for carbon allotropes of other dimensionality, it can be stacked to form 3d graphite or rolled into 1d nanotube. Graphene is the thinnest known material in the universe, and one of the strongest materials ever measured in terms of its in-plane Young modulus and elastic stiffness. The charge carriers in graphene exhibit giant mobility as high as 20 m2/Vs, have almost zero effective mass, and can travel for micrometers without scattering even at ambient conditions. Graphene can sustain current densities six orders of magnitude higher than that of copper, shows record thermal conductivity and stiffness, is impermeable to gases, and renders easy accessibility to optical probes. Electron transport in graphene is described by a Dirac-type equation, which allows the investigation of “relativistic” quantum phenomena in a benchtop experiment. This results in the observation of a number of very peculiar electronic properties from an anomalous quantum Hall effect to Kien paradox and the absence of localization. All these enticing features make this material an excellent candidate for application in various electronic, photonic and optoelectronic devices. For instance, its ballistic ambipolar transport and high carrier mobility are the most useful traits for making ultrafast and low-power electronic devices. Its high surface area shouldmake it handy in manufacturing tough composite materials. The extreme thinness of graphene could also lead to more efficient field emitters that release electrons in the presence of strong electric fields. Its robustness and light weight are useful for micromechnical resonators. The tunability of its properties could make it possible to build so-called spin-valve transistors, as well as ultra-sensitive chemical detectors. Many of such applications of graphene require tuning of its properties, which can be achieved by varying the number of layers or/and by doping. There are several ways to dope graphene: (i)electrochemically gated doping, (ii)molecular charge-transfer doping, and (iii) substitutional doping by atoms like Boron or Nitrogen.Moreover, for graphene, a zero band gap semiconductor in its pristine form, to become a versatile electronic device material it is mandatory to find means to open up a band gap and tune the size of the band gap. Several strategies have been adopted to engineer such a band gap in graphene in a controlled way. Some of these are based on the ability to control the geometry of graphene layers, some use graphene-substrate interactions, while others are based on chemical reactions of atoms or molecules with the graphene layer. Motivated by these considerations, in this thesis we present a systematic and thorough study of the structural, electronic and vibrational properties of graphene and their dependence on the number of layers, and on doping achieved electrochemically, molecularly and substitutionally, using first principles density functional theory (DFT). In Chapter 1, we give an introduction to the hitherto beguiling world of graphene. Here, we briefly discuss the structure, novel properties and potential applications of graphene, and the motivation for this thesis. In Chapter 2, an overview of the DFT formalism adopted here is given. We clearly state the theorems of the formalism and the approximations used when performing calculations. We succinctly explain how the various quantities like total energies, forces, stresses etcetera are calculated within this formalism. We also discuss how phonon frequencies, eigenvectors, electron-phonon couplings are obtained by using density functional perturbation theory (DFPT), which calculates the full dynamical matrices through the linear response of electrons to static perturbations induced by ionic displacements. Calculations are done first using a fully ab-initio approach within the standard Born-Oppenheimer approximation, and then time-dependent perturbation theory is used to explore the effects of dynamic response. In Chapter 3, using such first-principles density-functional theory calculations, we determine the vibrational properties of ultra-thin n(1,2,...,7)-layer graphene films and present a detailed analysis of their zone-center phonons. We present the results (including structural relaxations, phonons, mode symmetries, optical activities) for bulk Graphite, single-layer graphene and ultrathin n-layer graphene films. and discuss the underlying physics of our main results together with a pictorial representation of the phonon modes. We demonstrate that a low-frequency (∼ 112 cm−1 ) optical phonon with out-of-plane displacements exhibits a particularly large sensitivity to the number of layers, although no discernible change in the interlayer spacing is found as n varies. Frequency shifts of the optical phonons in bilayer graphene are also calculated as a function of its interlayer separation and interpreted in terms of the inter-planar interaction. The surface vibrational properties of n-layer graphene films are presented in Chapter 4, which renders a detailed and thorough analysis of all the surface phonon modes by determining, classifying and identifying them accurately. The response of surface modes to the presence of adsorbed hydrogen molecules is determined. As an illustrative adsorbate, hydrogen is chosen here mainly because of its huge importance in fuel cell technology and as a molecular sensor. We demonstrate that a doubly degenerate surface phonon mode with low-frequency (~ 35cm−1)exhibits a particularly large sensitivity to the adsorption of hydrogen molecules, as compared to other surface modes. Futhermore, we show that a low-frequency (108.8 cm−1)bulk-like phonon with out-of-plane displacements is also very sensitive and gets upshifted by as much as 21 cm−1 due to this adsorption. In Chapter 5, we determine the adiabatic frequency shift of the and phonons in a monolayer graphene as a function of both electron and hole doping. The doping is simulated here to correspond to electrochemically gated graphene. Compared to the results for the E2g -Γ phonon (Raman G band), the results for the phonon are dramatically different, while those for the phonon are not so different. Furthermore, we calculate the frequency shifts, as a function of the charge doping, of the (K + ΔK) phonons responsible for the Raman 2D band –a key finger print of graphene, where [ΔK] is determined by the double resonance Raman process. Doping graphene with electron donating or accepting molecules is an interesting approach to introduce carriers into it, analogous to electrochemical doping accomplished in graphene when used in a field-effect transistor. In Chapter 6, we use first-principles density-functional theory to determine changes in the electronic structure and vibrational properties of graphene that arise from the adsorption of aromatic molecules such as aniline and nitrobenzene. Identifying the roles of various mechanisms of chemical interaction between graphene and the adsorbed molecules, we bring out the contrast between electrochemical and molecular doping of graphene. Our estimates of various contributions to shifts in the Raman active modes of graphene with molecular doping are fundamental to the possible use of Raman spectroscopy in (a)characterization of the nature and concentration of carriers in graphene arising from molecular doping, and (b) graphene-based chemical sensors. Graphene doped electrochemically or through charge-transfer with electron-donor and acceptor molecules, shows marked changes in electronic structure, with characteristic signatures in the Raman spectra. Substitutional doping, universally used in tuning properties of semiconductors, could also be a powerful tool to control the electronic properties of graphene. In Chapter 7, we present the structure and properties of boron and nitrogen doped graphenes, again using first-principles density functional theory. We demonstrate systematic changes in the carrier-concentration and electronic structure of graphenes with B/N-doping, accompanied by a stiffening of the G-band and change of the defect related D-band in the Raman spectra. Such n/p -type graphenes obtained without external fields or chemical agents should find device applications.

This thesis presents experimental and related theoretical studies of single layer graphene, bilayer graphene and single walled carbon nanotubes. The thesis is divided into three parts; the first part describes the phonon renormalization due to doping in two dimensional graphene and one dimensional carbon nanotubes. In the recent years, there is a tremendous interest both experimentally and theoretically, in the issues related to electron-phonon coupling in nanotubes and graphene. Theoretically, it is expected that the presence of Kohn anomalies in graphene and metallic nanotubes will result in significant changes in the self energy of phonons due to doping. In particular, with Fermi energy shift how the blockage of phonon decay (due to Pauli Exclusion Principle) into electron-hole excitations changes the phonon frequencies as well as its life time have been studied in details in the first part of the thesis. Since in graphene and metallic nanotubes, the momentum relaxation time of electrons is comparable to the phonon pulsation time, the phonon cannot be treated as a static perturbation and hence non-adiabatic effects are taken into account using time dependent perturbation theory. Electron-phonon coupling constant is also a key parameter to understand the mobility of carrier due to electron scattering by optical phonons at room temperature and limitation of the maximum current carrying capacity of graphene and nanotubes. All these parameters are determined in the first part of the thesis by performing in-situ transport and Raman measurements on graphene and nanotubes based field effect transistors. The second part of the thesis deals with the interaction of bio-molecules (nucleobases) with the nanotubes and graphene. The binding energies of various nucleobases with nanotubes and graphene have been calculated theoretically using quantum chemical and classical force field calculations, and experimentally from isothermal titration (micro) calorimetry. In this part we also present an experimental study on the dynamics of water confined inside the carbon nanotubes. Proton nuclear magnetic resonance studies have been used to probe the freezing and dynamics of the confined water inside 1.4 nm diameter single walled carbon nanotubes. We have observed that the confined water does not freeze up to 223K. The dynamics of confined water has been studied using pulsed field gradient technique. The decay of spin echo intensity as a function of gradient field shows characteristic features of water confined in unidimensional channels. From the decay profiles the mean squared displacement of water molecules is obtained for different diffusive times, showing an unambiguous evidence of single file diffusion of water molecules inside the nanotubes i.e mean squared displacement varying as square root of time. In the last part, we have developed carbon nanotube based vibration sensor and accelerometer to detect the vibrations of liquid and solid, respectively, using the property of voltage generation in nanotubes due to liquid flow.

In this thesis, experimental studies are reported of ultrafast dynamics and third order optical nonlinear coefficients of carbon nanotubes, and time resolved coherent phonon dynamics of semiconductors and rare earth titanates. The thesis is divided into three parts. The first part presents (i) general introduction to theoretical background on nonlinear optical susceptibility and time resolved studies, and systems studied (chapter 1) and (ii) experimental techniques (chapter 2). The second part of the thesis deals with the measurements of third order nonlinear susceptibilities and ultrafast dynamics of single and double walled carbon nanotubes (chapter 3). The third part contains coherent phonon dynamics in semiconductors, Te (chapter 4), Bi2Te3 (chapter 5), and ZnTe (chapter 6) and spin-frustrated rare earth titanate insulators (chapter 7). Chapter 1: This chapter is a general introduction to the thesis. The chapter is divided into two parts: (i) light-matter interaction, and (ii) systems studied. Under light-matter interaction, we describe the required theoretical and conceptual background of nonlinear optical susceptibilities and time resolved carrier and phonon dynamics. In the next part, a brief summary of details of the systems studied, that include carbon nanotubes (single and double walled), semiconductors (Te, Bi2Te3 and ZnTe) and insulating spin-frustrated rare earth titanates (Gd2Ti2O7, Dy2Ti2O7 and Tb2Ti2O7), are presented. Chapter 2: Details of the ultrafast laser systems (femtosecond oscillator and amplifier), pulse width measurements and ultrafast experimental pump-probe and z-scan techniques, used in this thesis are given in this chapter. Chapter 3: Here the experimental results on the measurements of third order optical nonlinearity and ultrafast dynamics of single and double walled carbon nanotubes are presented. The chapter starts with a general overview of optical switching followed by known ultrafast dynamics and nonlinear studies on carbon nanotubes. In the next section, our theoretical modelling of nonlinear absorption and refraction in the limit of saturable absorption is described. The final two sections depict our results on single and double walled carbon nanotubes. These studies indicate that double walled carbon nanotubes are best candidates for ultrafast optical switching. Chapter 4: This chapter presents temperature and pump fluence dependent femtosecond time resolved reflectivity measurements on tellurium. The chapter starts with an overview of previous pump-probe reflectivity studies at room temperature on tellurium followed by our results. A totally symmetric A1 coherent phonon at 3.6 THz responsible for the oscillations in the reflectivity data is observed to be strongly positively chirped (i.e, phonon time period decreases at longer pump-probe delay times) with increasing photoexcited carrier density, more so at lower temperatures. We show for the first time that the temperature dependence of the coherent phonon frequency is anomalous (i.e, increasing with increasing temperature) at high photoexcited carrier density due to electron-phonon interaction. At the highest photoexcited carrier densities of ~ 1.4 x 1021cm-3 and the sample temperature of 3K, the lattice displacement of the coherent phonon mode is estimated to be as high as ~ 0.24 Å. Numerical simulations based on coupled effects of optical absorption and carrier diffusion reveal that the diffusion of carriers dominates the non-oscillatory electronic part of the time-resolved reflectivity. Finally, using the pump-probe experiments at low carrier density of 6 x 1018 cm-3, we separate the phonon anharmonicity to obtain the electron-phonon coupling contribution to the phonon frequency and linewidth. Chapter 5: This chapter begins with a introduction of previous ultrafast studies at room temperature on Bi2Te3 and then presents our results on the temperature dependent high pump fluence time resolved reflectivity measurements on Bi2Te3. The time resolved reflectivity data shows two coherently generated totally symmetric A1g modes at 1.85 THz and 3.6 THz at 296K which blue shift to 1.9 THz and 4.02 THz, respectively at 3K. At high photoexcited carrier density of ~ 1.7 x 1021cm-3, the phonon mode at 4.02 THz is two orders of magnitude higher positively chirped than the lower frequency mode at 1.9 THz. The chirp parameter, β is shown to vary inversely with temperature. The time evolution of these modes is studied using continuous wavelet transform of the time-resolved reflectivity data. The analysis shows that the build up time for the two coherent phonons is different. Chapter 6: This chapter starts with a general introduction on various as pects of ZnTe to be used in generation and detection of THz followed by our results on influence of carriers and sample temperature on coherent phonon and polariton generation in ZnTe. Combination of femtosecond Kerr, two photon absorption and impulsive stimulated Raman scattering experiments have been carried out to investigate the effect of pulse energy and crystal temperature on the generation of coherent polaritons and phonons in < 110 > cut ZnTe single crystals of three different resistivities. We demonstrate that the effect of two-photon induced free carriers on the creation of both the polaritons and phonons is largest at 4K where the free carrier lifetime is enhanced. Further, the temperature dependant impulsive stimulated Raman scattering on high and low purity ZnTe crystals allows us to unambiguously assign the phonon mode at 3.5 THz to the longitudinal acoustic mode at X-point in the Brillouin zone, LA(X) in contrast to the assignment as two-phonon process in earlier studies. Chapter 7: This chapter starts with an introduction on previous Raman studies on the pyrochlore systems accompanied by our results on the generation of coherent optical phonons in spin frustrated pyrochlore single crystals Dy2Ti2O7, Gd2Ti2O7 and Tb2Ti2O7 and their behavior as a function of sample temperature from 296K to 4K. At 4K, two coherent phonons are observed at 5.3 THz (5.0 THz) and ~ 9.3 THz (9.4 THz) for Dy2Ti2O7 (Gd2Ti2O7) whereas three coherent phonons are generated at ~ 4.8 THz, 8.6 THz and 9.6 THz for Tb2Ti2O7. In the case of spin-ice Dy2Ti2O7, a clear discontinuity is observed in the linewidths of both the coherent phonons as well as in the phase of low energy coherent phonon mode, indicating a subtle structural change as also suggested by Raman studies. In comparison, such changes are not seen in the coherent phonons of Gd2Ti2O7, and Tb2Ti2O7. Another important observation is the phase difference of ‘π’ between the modes in all the samples, thus suggesting that the driving forces behind the generation of these modes are different in nature unlike a purely impulsive or displacive mechanism. Chapter 8: This chapter summarizes our results reported in this thesis and gives future directions.