This practice-led research investigates the feasibility of combining glass and ceramics in a hot state, as a means of artistic expression in studio practice. Glass and ceramics have many related material qualities and are processed in similar ways. Chemically they are alike however structurally they are very different, which creates compatibility problems when they are combined in a hot state. Through controlled processing, material properties can alter when each is partially converted into the other. It is recognised by artists in the field of studio ceramics that porcelain can partially convert into a glassy form when high fired to create a translucent material. Likewise it is recognised in the field of industrial engineering that glass can partially convert into a ceramic form when processed in a controlled way to create a glass-ceramic material; this material is not used by practitioners and would be difficult to develop in a studio environment. A total of 43 contemporary practitioners were found that worked in both glass & ceramics in their work. Of these only 16 practitioners combined glass and ceramics in a hot state, the majority combined them in a cold state to avoid compatibility issues. It became apparent that there is a distinct lack of published material on the combination of glass and ceramics in studio practice. It was the aim of this investigation to address this gap by identifying and testing potential hot state processing routes. This research addresses these issues through a multiple-method approach rooted in creative practice; directed by the following aims: • To develop the practical and creative parameters of the combination of glass and ceramics in a hot state. • To demonstrate and articulate the possible creative and practical benefits of the new processing routes as a model for practitioners in the field. • To articulate the significance of the research methods and results through the mapping of the field. Material testing was focused on artistic practice and experimentation which identified the creative parameters of combining glass and ceramics in a hot state, four potential process routes that combine glass and ceramics in a hot state were identified and tested. This testing was further extended and supported by the application of compatibility studies, which helped to match the expansion rates of glass and ceramics when they are combined. Bone china was identified as the closest fit to glass in terms of expansion rates; quartz was added to further improve the fit of the materials. Case studies of artists that work in glass and ceramics have been used to position the research within the field. New insights have emerged into the combined processing of glass and ceramics in a hot state. This approach offers a series of potential processing routes to be viewed as a model for others in the field. The final submission includes a thesis, a series of materials tests, and a body of related artworks that demonstrate the hot state combination of the materials.

This Ph.D thesis describes an investigation into the operation of the Blue Circle Cauldon Works precalciner vessel. The vessel is part of the cement making plant and it serves the purpose of providing a furnace that is maintained at approximately 900C to calcine the limestone in the raw meal prior to cementation in the kiln. At Cauldon, tyre chips are used as a support fuel. It was the aim of this work to predict the likely behaviour of the gases and particles in the precalciner by using Computational Fluid Dynamics modelling. The commercial code Fluent was used. Investigation of the likely trajectories and combustion behaviour of tyre chips was particularly important. In this way it was hoped that a method of assessing the suitability of alternative waste fuels for incineration in the precalciner might be established. CFD models were constructed that simulated the precalciner with all main reactions and energy exchanges occurring. The first model predicted the behaviour of the precalciner burning coal and the full load of raw meal. Subsequent models assessed the sensitivity of the first model to changes in the boundary conditions. Further models were developed together with experimental work to assess the combustion and aerodynamic behaviour of the tyre chips. Alternative injection points for the tyre chips were investigated. This type of precalciner had not previously been modelled elsewhere. Similar models were found for the operation of the precalciner without tyre chips but the geometrical accuracy of the models was improved in this work due to improvements in commercial CFD code. No similar study of tyre chip combustion has been made elsewhere. CFD was used successfully to model a precalciner vessel with tyre chip and coal combustion and the full raw meal loading simulated. Adjustments can be made quickly to the model to assess minor geometrical alterations. Alternative fuel injection points can be quickly assessed using the model.

Thesis (Ph. D.)--Virginia Polytechnic Institute and State University, 1993. / Vita. Abstract. Includes bibliographical references (leaves 170-175). Also available via the Internet.

Both Chinese and Islamic glazed ceramics played a significant role in the history of ancient ceramic production. Moreover, it was innovation in glazes that made the Chinese and Islamic ceramics constantly innovative in various categories with different manufacturing techniques. This study applies chemical and isotopic analyses to investigate the manufacturing techniques and provenances of different types of glazes from Northern China and the Middle East, and extends the use of Sr isotopic analysis to investigate raw materials and glaze recipes used to making lime/alkaline glazes in Northern China and the Middle East for the first time. By chemical compositions of the lead glazes, the glazing techniques used to produce Chinese Tang Sancai lead glazes and splashed lead glazes from the Middle East have been identified. The mixture of lead oxide plus quartz/quartz sand was used for making both Chinese Tang Sancai glazes and Islamic splashed lead glazes. Besides, for the Chinese lead glazes, the trace element and lead isotopic analyses of them have been effective in grouping glazes made in different production kiln sites, and hence associating the Tang Sancai wares excavated from archaeological sites of unknown origin with their production centres. Furthermore, by comparing the lead isotopic ratios of Islamic lead glazes and those of lead ore deposits, the possible sources of lead used for making lead glazes can be determined, although more than one source was suggested due to the overlap of Pb isotopic ratios of different lead ore sources in some cases. This study is the first time that Sr isotopic analysis has been applied to the lime/alkaline glazes from Northern China and the Middle East. It has revealed that Sr isotopic compositions of lime/alkaline glazes from Northern China and the Middle East have been very effective in providing information on the glaze recipes and characteristics of raw materials used for making them. Based on Sr isotopic compositions, the case study of Nothern Chinese lime glaze has identified that the Yaozhou celadon glaze was probably produced by local ‘Fuping glaze stone’ combined with botanic ash. Besides, the case study of the Middle East alkaline glaze has suggested that the Raqqa ware glaze was probably made by ‘Cenozoic sand’ containing a certain content of limestone grains and feldspar and that botanic ash was used as a flux.

No description available.

Global warming and the high energy demands of fossil fuel in industries have led governments to implement legislation aimed towards developing more energy efficient and sustainable processes. In the brickwork industry, the burning of coal and natural gas provides the energy to fire clay bricks in the 900-1200 oC range into high quality building materials. Microwaves powered by renewable energy sources have been suggested as a sustainable alternative to fossil fuels. Microwave heating has been considered a promising technique for the processing of clays due to the potential energy consumption and carbon footprint reductions, and for its volumetric heating nature, which enables the fast and uniform heating of a load. This could result in improving the mechanical properties of the fired products. The aims of this project were to develop an understanding of how microwaves interact with clays in order to show whether they could be used to fire clay-based building materials, and to understand how this could be achieved and the parameters that affect it. The composition of Danish clays was quantified, i.e. quartz, calcite, albite, orthoclase, kaolinite, montmorillonite and muscovite, and their thermal evolution was studied across the firing range. The dielectric properties of clays were measured at 912-2470 MHz and 20-950 oC in order to investigate the microwave/clay interaction, assess the effects of changing composition, temperature, frequency and material's density on their potential for microwave processing, and provide critical information on the design and scale up of this technology. Relating the mineralogy of a material and its evolution during heating to changes on the dielectric property trends, and thus microwave processability, was examined for the first time in this thesis. Insight into the influence of individual components on the potential for microwave heating was gained from an analogous study on clay constituents. While the dielectric constants of clays were found to be relatively stable during heating, their loss factors fluctuated with temperature. Free and physically bound water were the dominant dielectric species near room temperature, while their removal halved the loss factors until 350 oC. Beyond this temperature, a steady increase in the loss factors concurred with the mineral dehydroxylations. The loss factors sharply rose beyond 800 oC due to sintering effects, while calcite decomposition partially counteracted this growth. Montmorillonite and muscovite were the most microwave absorbing mineral species due to their water affinity and interlayer cation content, enabling the microwave treatment of the whole clay. On the other hand, a frequency shift from 2470 MHz to 912 MHz resulted in a loss factors increase. This is mainly due to the frequency shifting towards the dipolar dispersion area of physically bound water and the zone in which ionic conductivity heating effects dominate. Mixing rules were used to relate each single mineral to dielectric property variations, and thus rapidly gain knowledge of the microwave processability of any clay across the firing range based on its composition. Böttcher model provided accurate estimations when compared to experimental measurements, and with the same degree of uncertainties at the 912-2470 MHz frequencies and 0.56-0.37 void fraction ranges. The model was expanded for different compositions with clays from Spain, England and Netherlands. This was the first time that mixing rules were successful in estimating mixtures of more than three constituents. A microwave system was developed with the aim of firing clay products of comparable quality to conventional specimens. The basis of design focused on maximising the thermal uniformity of the clay load. The process design steps involved remodelling the clay load, building heat transfer models of the load, carrying out trials to study whether clays behave as expected from their dielectric properties, i.e. volumetric or selective heating, minimising thermal gradients, and assessing alternative methods for the control of the holding stage. Microwave firing cycles manufactured clays with a thermal uniformity at the height of firing of 1050±55 oC and reduced processing times to < 3 h. This is 92% faster than in brickworks, where conventional samples could not match the heating rates without cracking. High temperature (>800 oC) mineral reactions went unfinished due to the reduced holding time of the microwave treatment (30 min), which resulted in dimmer surface colorations. Enhanced thermal uniformity and reduced time for densification resulted in specimens with a 12% higher compressive strength, 38% larger water absorption and 7% higher void fraction. Clay samples three times as big were fired to gain an insight into the scale up of the technique. A tighter process control and higher reproducibility were reported, which is promising for potentially allowing longer holding times in scaled up processes, but the product quality improvement did not change. Looking into an industrial scale up, further work would be required to assess possible design concepts, and an optimal microwave firing process may require complete redesign of the furnace configuration, where several challenges need to be considered, such as brick arrangement, power availability and applicator size and shape. For the purposes of assessing the possible economic and environmental impact of implementing microwave clay firing at industrial scale, one of the most straightforward designs, i.e. retrofitting of an industrial tunnel kiln for microwave processing, was considered. Although energy expenditures would decrease from 11.6 GJ fuel/h to 6.1 GJ electricity/h when using a microwave system for the same throughput, the higher cost of electricity and microwave equipment over conventional burners made the conventional technique more economically feasible. The substitution of natural gas by electricity powered by green energy sources resulted in carbon footprint reductions of >95%, and agreed with the energy policies of numerous countries and supranational organisations worldwide.