No description available.

In this thesis, size-exclusion chromatography (SEC) of woodpolymers dissolved in lithium chloride/N,N-dimethylacetamide(LiCl/DMAc) has been used to characterize the molar massdistributions (MMD) of wood polymers in pulp fibers afterchemical degradation. Characterization of birch kraft pulps subjected to ozonedegradation and acid hydrolysis, respectively, rendereddifferent changes in the MMD. Ozone degradation resulted inlarge redistributions of the original MMD, observed as thedevelopment of a distinct fraction of cellulose withintermediate molar mass. Acid hydrolysis resulted in minorchanges of the original MMD compared to ozonation. Fiberssubjected to acid hydrolysis were considerably weaker thanozonated fibers. These results indicated that there aredifferences in how the two chemicals degrade the fiber. The solubility of softwood kraft pulp fibers was enhanced byderivatization of the fiber polymers with ethyl-isocyanateduring simultaneous dissolution in LiCl/DMAc. Thederivatization made it possible to achieve reliable estimationsof the MMD, and hence molar masses, of softwood kraft pulps.The derivatization procedure made it possible to dissolve 90 %of softwood kraft pulps with kappa numbers over 50. Severe alkaline degradation of birch and Norway spruce woodchips was studied both by varying the pulping time and byvarying the initial alkali concentration. Differences werefound in the MMD of the two fiber types, and the alkalinedegradation was found to affect polymers in the entire MMD. Multi-angular laser light scattering (MALLS) was used as adetection technique with SEC on cellulosic samples. The MMD andaverage molar masses obtained through directstandardcalibration with commercial standards were compared with MMDand molar masses as obtained by MALLS-detection. Largediscrepancies were found, and two methods of correcting forthese discrepancies were developed. Theoretical simulations of polymer degradation wereperformed. Random, or homogeneous degradation was used as amodel for alkaline cellulose chain scission, and a resemblancewith experimental data was observed. End-wise depolymerizationof cellulose was also simulated and the results are discussedin the light of experimentally observed MMD. <b>Keywords:</b>cellulose, kraft pulp, birch, spruce,ozonation, acid hydrolysis, degradation, MMD, sizeexclusionchromatography, light scattering, molar mass, chainscission

<p>In this thesis, size-exclusion chromatography (SEC) of woodpolymers dissolved in lithium chloride/N,N-dimethylacetamide(LiCl/DMAc) has been used to characterize the molar massdistributions (MMD) of wood polymers in pulp fibers afterchemical degradation.</p><p>Characterization of birch kraft pulps subjected to ozonedegradation and acid hydrolysis, respectively, rendereddifferent changes in the MMD. Ozone degradation resulted inlarge redistributions of the original MMD, observed as thedevelopment of a distinct fraction of cellulose withintermediate molar mass. Acid hydrolysis resulted in minorchanges of the original MMD compared to ozonation. Fiberssubjected to acid hydrolysis were considerably weaker thanozonated fibers. These results indicated that there aredifferences in how the two chemicals degrade the fiber.</p><p>The solubility of softwood kraft pulp fibers was enhanced byderivatization of the fiber polymers with ethyl-isocyanateduring simultaneous dissolution in LiCl/DMAc. Thederivatization made it possible to achieve reliable estimationsof the MMD, and hence molar masses, of softwood kraft pulps.The derivatization procedure made it possible to dissolve 90 %of softwood kraft pulps with kappa numbers over 50.</p><p>Severe alkaline degradation of birch and Norway spruce woodchips was studied both by varying the pulping time and byvarying the initial alkali concentration. Differences werefound in the MMD of the two fiber types, and the alkalinedegradation was found to affect polymers in the entire MMD.</p><p>Multi-angular laser light scattering (MALLS) was used as adetection technique with SEC on cellulosic samples. The MMD andaverage molar masses obtained through directstandardcalibration with commercial standards were compared with MMDand molar masses as obtained by MALLS-detection. Largediscrepancies were found, and two methods of correcting forthese discrepancies were developed.</p><p>Theoretical simulations of polymer degradation wereperformed. Random, or homogeneous degradation was used as amodel for alkaline cellulose chain scission, and a resemblancewith experimental data was observed. End-wise depolymerizationof cellulose was also simulated and the results are discussedin the light of experimentally observed MMD.</p><p><b>Keywords:</b>cellulose, kraft pulp, birch, spruce,ozonation, acid hydrolysis, degradation, MMD, sizeexclusionchromatography, light scattering, molar mass, chainscission</p>

We characterize the impact of high-energy, 172 nm vacuum ultraviolet photons on the molecular weight and the glass transition temperature of poly(methyl methacrylate). We found that the molecular weight is reduced strongly on the surface of the exposed samples with a continuous transition towards the unexposed bulk material being located below the modified region. The glass transition temperature was found to be significantly lowered in the exposed region to well below 50°C compared to that of the 122°C of the bulk region. We could use this material contrast to selectively reflow the top surface of the exposed samples only. This allowed us to create ultra-smooth micro-optical structures by postprocessing without influencing the overall geometry that is required for the optical functionality.

No description available.