Investigations on chemical thinning of peaches by use of blossom and post blossom sprays have been in progress since the last decade mainly in the United States, Canada, and some European countries. Horticulturists are attempting to find new means to minimize the expense of hand thinning. The high cost of the hand thinning operation has caused many growers to underestimate the importance of this practice, and as a result their orchards have fallen into the biennial bearing habit. In addition, the fruit from un-thinned orchards was not acceptable on the market since it was small in size, lacked color, and often was infected with insects and diseases because of its hanging in close clusters on the trees.

Thesis (PhD(Agric) (Horticulture))--Stellenbosch University, 2008. / Lack of winter chilling is a major problem in producing temperate-zone fruit in warm climates. Delayed foliation and protracted bud burst and flowering are the main problems necessitating artificial means to break dormancy. In South Africa (SA), most apple production areas receive insufficient winter chilling, and an annual application of rest breaking (RB) agents is included as standard practice. The most used RB agent in SA was dinitro-o-cresol (DNOC) but its use was discontinued. Hydrogen cyanamide (HC) became the replacement. It has been effective in apple, but variable effects on fruit set, blossom, yield and fruit quality have been reported. Thidiazuron (TDZ) has also shown the ability to break dormancy in apples. Another important practice in apple production is chemical thinning (CT). However, results are highly influenced by the type of chemical, weather conditions, cultivar and blossom pattern. With the increasing efficacy of RB and by identifying its effects on vegetative and reproductive development, it will be possible to determine more effective chemical thinning treatments. The objective of this study was to determine appropriate RB treatments for apple trees in a warm winter climate, identifying their effect on vegetative and reproductive development and the influence on CT efficacy. The research was performed in the Elgin area (34°S, 300 m) SA, over a period of three years, on ‘Golden Delicious’ and ‘Royal Gala’. In evaluating the effect of different HC concentrations and oil, no synergistic or antagonistic effects were observed on budburst and yield. Mineral oil at 4% plus 1 to 2% Dormex® combined were sufficient to break dormancy. Dormex® at 4% (2.08% HC) reduced fruit set and yield. In general, the rest breaking treatments (DNOC, HC and TDZ) enhanced the final vegetative bud burst compared to the control, while reproductive bud burst in 2002 and 2003 was not significantly influenced. The treatments compressed and advanced flowering periods, but this effect was not always evident when the spring was warm. The treatments synchronised flowering on the tree and between the two cultivars. The mixture of 0.245% HC and 4% oil was less effective in terms of increasing bud burst in ‘Royal Gala’ compared to other rest-breaking treatments. The mixture of 0.49% HC and 4% oil effectively compressed and synchronised flowering in ‘Golden Delicious’. TDZ-oil used at the lower rates also increased bud burst and concentrated flowering. However, it appears that after a cooler winter, higher rates could result in an exacerbated bud burst effect with excessive vegetative growth. The rate and timing of TDZ-oil application influenced the reproductive development of apples and therefore fruit quality. In ‘Golden Delicious’ increased fruit set, number of seeds, and reduced fruit russeting appear as beneficial results of TDZ-oil, whereas fruit set and russeting was not affected in ‘Granny Smith’. TDZ-oil, when applied late and at increasing rates, led to an increase in the malformation of calyx cavities, especially when chemical thinning was performed using the cytokinin-like compound benzyladenine. The effect seemed to be cultivar specific, with ‘Golden Delicious’ being the most severely affected. Increased return bloom in response to late TDZ application in ‘Golden Delicious’ and ‘Royal Gala’ appeared to be beneficial.

Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Thinning is an important practice in pome fruit production which aims to ensure an optimal yield of high quality, large sized fruit as well as an adequate return bloom. In South Africa, pome fruit thinning is generally done by means of chemicals, with follow-up hand thinning. When thinning is effective, set and thus the hand thinning requirement should be reduced. This is important as labor cost associated with hand thinning is high and continually rising. Chemical thinning is weather dependent and can be environmentally harmful, which has led to a shift towards environmentally acceptable methods of thinning such as mechanical thinning. From 2013 until 2015 the mechanical string thinners, viz. Darwin 300™, BAUM, and Bloom Bandit™, were evaluated. These machines are used to thin trees during full bloom and reduce the number of flowers before fruit set. The aim of the trials was to reduce fruit set and therefore hand thinning requirement, while increasing fruit size and quality, maintaining yield and return bloom. A range of tractor speeds and rotational rates were evaluated with the Darwin 300™ on ‘Forelle’ pears and ‘Cripps’ Pink’ apples, while the BAUM was evaluated only on ‘Cripps’ Pink’ apples. The hand-held Bloom Bandit™ was evaluated on ‘Forelle’, ‘Cripps’ Pink’, ‘Fuji’ and ‘Cripps’ Red’. The tractor-driven mechanical thinning devices gave erratic results. The most consistent results on ‘Forelle’ were obtained using the Darwin 300™ at 5.2 km·h-1 and 300 rpm, while the BAUM gave no consistent results. The unreliability of results were due to South African pome fruit orchards currently being unsuitable for tractor-driven mechanical thinning machines. The ‘Forelle’ orchard trained to a Palmette system was the most suited for thinning, which is reflected in the more positive results obtained, but further improvements are possible. The Bloom Bandit™ effectively thinned pear and apple trees and increased fruit size without a decrease in yield or return bloom. More time is spent on thinning with the device compared to tractor-driven machines and this should be taken into account when considering using the Bloom Bandit™. Thinning intensities of 25%, 50% and 75% of clusters or flowers was applied to mature ‘Forelle’ and ‘Cripps’ Red’ trees during full bloom. Variable effects were seen on fruit set, yield was reduced to acceptable levels, while fruit size was improved in ‘Forelle’ but not ‘Cripps’ Red’. Results showed that when thinning mechanically, the aim should be to remove between 25% and 50% of flowers clusters in ‘Forelle’ and 50% of flowers clusters in ‘Cripps’ Red’. These levels of thinning gave the best results in terms of the remaining hand thinning requirements and improved return bloom in ‘Forelle’. We, however, only evaluated full cluster thinning and not within cluster thinning, which might also occur during mechanical thinning. / AFRIKAANSE OPSOMMING: Vruguitdunning is 'n belangrike praktyk in kernvrugproduksie en het ten doel om voldoende opbrengs van hoë kwaliteit, groot vrugte en voldoende opvolgblom te lewer. In Suid-Afrika, word kernvrugte gewoonlik chemies uitgedun, opgevolg met handuitdunning. Effektiewe uitdunning verminder set en dus die benodigde handuitdunning. Dit is belangrik aangesien die arbeidskoste verbonde aan die handuitdunning hoog is en voortdurend styg. Chemiese uitdunning is afhanklik van weerstoestande en dit kan ook omgewing-onvriendelik wees. Hierdie nadele het gelei tot 'n verskuiwing na omgewingsaanvaarbare metodes van uitdunning soos meganiese uitdun. Vanaf 2013 tot 2015 is die meganiese Darwin 300™, BAUM en Bloom Bandit™ uitdunmasjiene geëvalueer. Hierdie masjiene word gedurende volblom gebruik om blomme uit te dun en verminder die aantal blomme voor vrugset. Die doel van die proewe was om vrugset en dus die handuitdunvereiste te verminder met ‘n gepaardgaande verbetering in vruggrootte en kwaliteit sonder om opbrengs en opvolgblom nadelig te beïnvloed. Trekker en rotasiespoed is gevarieer met die Darwin 300 ™ op 'Forelle' pere en ‘Cripps’ Pink' appels, terwyl die BAUM net op 'Cripps' Pink' appels geëvalueer is. Daarbenewens was die hand-draagbare Bloom Bandit™ geëvalueer op 'Forelle', 'Cripps' Pink’, ‘Fuji’ en ‘Cripps' Red’. Die trekkergedrewe uitdunmasjiene het wisselvallige resultate opgelewer. Die mees konstante resultate op 'Forelle' is verkry met die Darwin 300™ teen 5.2 km·h-1 en 300 rpm, terwyl die BAUM nie konsekwente resultate gegee het nie. Die wisselvallige resultate van die Darwin 300™ en die BAUM is te wyte aan die boorde wat nie vir trekkergedrewe uidunmasjiene geskik is nie. Die 'Forelle’ boord, wat as 'n Palmette stelsel opgelei is, was die meeste geskik vir uitdunning, soos duidelik uit die positiewe resultate wat verkry is, maar verdere verbeterings is steeds moontlik. Die Bloom Bandit™ het peer en appel bome effektief uitgedun deur die handuitdunvereiste te verminder en vruggrootte te verbeter sonder verlies in opbrengs of opvolgblom. Meer tyd word gespandeer tydens uitdunning met hierdie toestel in vergelyking met trekkergedrewe masjiene, en dit moet in ag geneem word met oorweging van die Bloom Bandit™. Uitdunningsintensiteite van 25%, 50% en 75% van die trosse of blomme is tydens volblom toegepas op volwasse 'Forelle’ en ‘Cripps’ Red' bome. Vrugset het aansienlike variasie getoon terwyl opbrengs tot aanvaarbare vlakke verminder en vruggrootte verbeter is in 'Forelle' maar nie in 'Cripps' Red’ nie. Resultate het getoon dat die doel moet wees om tussen 25% en 50% van alle blomme in trosse in 'Forelle’ en 50% van blomme in trosse in 'Cripps’ Red’ tydens meganiese uitdunnig te verwyder. Hierdie vlakke van uitdunning het die beste resultate gegee ten opsigte van die oorblywende handuitdunvereistes en het opvolgblom in 'Forelle’ verbeter. Ons het egter net volledige trosse uitdunning gedoen en nie blomuitdunning binne die tros wat ook tydens meganiese uitdun kan plaasvind nie.

Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: Thinning of stone fruit, just as in any other deciduous fruit crop, plays an important role in producing fruit of the right size and quality. Hand thinning is highly labor intensive and time consuming, thus an alternative method of thinning is important to the industry. Chemical and mechanical thinning either alone or in combination could be the alternative. Two chemicals, 1-aminocyclopropane-1-carboxylic acid (ACC) and 6-benzyladenine (6-BA) were evaluated on Japanese plums, cling peaches and nectarines. In addition, the Darwin 300™, a mechanical string thinner, was also included in trials on early maturing ‘Alpine’ nectarine and ‘African Rose™’ plum. In all trials the objective was to reduce the required hand thinning during commercial hand thinning without compromising on yield and fruit quality. In Japanese plums we were able to reduce the hand thinning requirement significantly with both the ACC thinning and mechanical thinning strategies. Regarding ACC, cultivars differed in their sensitivity to the chemical and the recommended rate will differ for cultivars. ACC consistently reduced the required hand thinning linearly with increasing rate. The recommended rate of ACC for ‘African Rose™’ is 600 μl.L-1 and for ‘Laetitia’ 400 μl.L-1. For ‘Fortune’ a recommended rate could not be determined at this stage, thus further trials should be conducted. The Darwin 300™ reduced hand thinning significantly without reducing the yield significantly. Combining the Darwin 300™ with ACC 600 μl.L-1 in ‘African Rose™’ gave promising results with regard to hand thinning requirement and fruit size, without reducing yield efficiency significantly. No leaf drop was observed on Japanese plums, except in the pilot trial when applications were made at high temperatures, which should therefore be avoided. ACC was effective as thinning agent in cling peaches. In ‘Keisie’, the results were positive during both seasons, and ACC reduced the hand thinning requirement without reducing yield efficiency. The recommended rate of ACC for ‘Keisie’ is 600 μl.L-1. Slight leaf drop was observed. In ‘Sandvliet’, there was a significant reduction in fruit set, without reducing the required hand thinning. The reduction in fruit set led to a significant reduction in yield. Severe leaf drop was observed, indicating that cultivars differ in sensitivity to ACC. ACC would not currently be recommended for ‘Sandvliet’. In nectarines, ACC only thinned ‘Turquoise’ but not ‘Alpine’ or ‘August Red’ at the rates and phenological stage used, again indicating cultivar differences in sensitivity. In ‘Turquoise’, the highest ACC rate (500 μl.L-1) reduced fruit set per tagged shoot, as well as the hand thinning requirement, but this rate also reduced the total yield. The Darwin 300™ evaluated on ‘Alpine’ reduced fruit set significantly and the hand thinning requirement without reducing yield efficiency, indicating that mechanical thinning is a viable option in nectarines. Slight leaf drop was observed in all nectarine trials and ACC would not currently be recommended for nectarines. 6-BA was included to combat ACC-induced leaf drop and was partially successful. The reason for the differences observed in response to ACC between cling peaches and plums on the one hand, and nectarines on the other, cannot currently be explained. / AFRIKAANSE OPSOMMING: Uitdun van steenvrugte, net soos vir enige ander sagtevrugte soort, speel 'n belangrike rol in die produksie van vrugte met die regte grootte en gehalte. Uitdun van steenvrugte is hoogs arbeidsintensief en tydrowend, dus is dit belangrik om ʼn alternatief te vind vir die bedryf. Chemiese of meganiese uitdunning alleen of in kombinasie kan die alternatiewe wees. Twee middels, 1-aminosiklopropaan-1-karboksielsuur (ACC) en 6-bensieladenien (6-BA) is geëvalueer op Japanese pruime, taaipitperskes en nektariens. Daarby is die Darwin 300™, ʼn meganiese uitdunmasjien, ingesluit vir twee vroeë kultivars, nl. Alpine nektarien en African Rose™ pruim. Die doel van die proewe was om handuitdunning tydens kommersiële handuitdun te verminder, sonder om die opbrengs en vrugkwaliteit negatief te beïnvloed. Vir Japanese pruime kon ons die nodige handuitdunning beduidend verminder met beide die ACC en meganiese uitdun strategieë. Daar was wel ʼn verskil tussen die kultivars se sensitiwiteit teenoor ACC en die aanbevole konsentrasie sal verskil tussen kultivars. ACC het die benodigde handuitdunning vir al drie kultivars lineêr verminder met ʼn toename in konsentrasie. Die aanbevole konsentrasie van ACC vir ‘African Rose ™’ is 600 μl.L-1 en vir ‘Laetitia’ 400 μl.L-1. Vir ‘Fortune’ kan daar nog nie op hierdie stadium 'n konsentrasie aanbeveling gemaak word nie. Die Darwin 300™ behandeling het die benodigde handuitdunning beduidend verminder sonder om die opbrengs te beïnvloed. Die kombinasie van die Darwin 300 ™ met ACC 600 μl.L-1 het ook goeie resultate opgelewer wat handuitdunning en vruggrootte aanbetref sonder om die opbrengsdoeltreffendheid te verlaag. Geen blaarval was opgemerk by die pruime nie, behalwe in ʼn voorlopige proef toe die ACC toegedien is by hoë temperature, wat dus vermy moet word. Die effektiwiteit van ACC as uitdunmiddel van taaipitperskes was belowend. Vir ‘Keisie’ was die resultate positief vir beide seisoene, en ACC het handuitdunning verminder sonder om die opbrengs te beïnvloed. Die aanbevole ACC konsentrasie vir ‘Keisie’ is 600 μl.L-1. Effense blaarval is wel waargeneem. Vir ‘Sandvliet’ was daar 'n beduidende vermindering in vrugset, sonder dat handuitdunning verminder is. Daar was ook 'n beduidende afname in opbrengs en erge blaarval in die proef waargeneem. ACC sal tans nie aanbeveel word vir 'Sandvliet’ nie. Met nektariens het ACC net ‘n uitduneffek op ‘Turquoise’ getoon, maar nie teen die aangewende dosisse en ontwikkelingstadium op ‘Alpine’ of ‘Augustus Red’ nie. Dit dui daarop dat ACC kultivarspesifiek mag wees. In ‘Turquoise’ het die hoogste konsentrasie (500 μl.L-1) vrugset van gemerkte lote en die handuitdunning verminder, maar ook die totale opbrengs. Die Darwin 300 ™ het die vrugset van ‘Alpine’ asook die benodigde handuitdunning aansienlik verminder sonder om die opbrengs te verlaag. Effense blaarval was opgemerk in alle nektarien proewe. ACC sal nie aanbeveel word as uitdunmiddel vir nektariens nie. 6-BA was in die studie ingesluit om ACC-geïnduseerde blaarval teen te werk en was slegs gedeeltelik suksesvol. Die rede vir die verskille in respons tot ACC tussen pruime, perskes en nektariens kan nie tans verklaar word nie.

Thesis (MScAgric (Horticulture))--Stellenbosch University, 2008. / Chemical thinning of fruit trees has become a central management practice for ensuring high fruit quality at harvest and return bloom the following season. Three trials were conducted in the 2004/5, 2006/7 and 2007/8 seasons to investigate the efficacy and mode of action of chemical thinning agents on European pear cultivars (Pyrus communis L) in the Western Cape, South Africa. The first trial was conducted in the 2004/5 and 2006/7 seasons to evaluate the efficacy of 50, 100 and 150 mg.l-1 6-benzyladenine (BA), and 30 and 40 mg.l-1 naphthylacetamide (NAD) on ‘Early Bon Chrétien’ pear. BA was more effective than NAD in reducing crop load and improving fruit size. Crop load decreased and fruit size increased with increasing rate of BA. BA significantly improved, whilst NAD failed to improve return bloom. In the second trial, three experiments were conducted in the 2006/7 and 2007/8 seasons to evaluate the efficacy of 100 to 200 mg.l-1 BA on ‘Forelle’ pear. The first experiment was conducted in the 2006/7 season where BA rates of 100, 125 and 150 mg.l-1 generally failed to reduce crop load or to improve fruit size and fruit size distribution and return bloom. The second experiment was conducted in the 2007/8 season where two BA rates, 150 and 200 mg.l-1 and a split-application of 3 x 50 mg.l-1 improved fruit size. The 200 mg.l-1 rate was the most effective treatment. BA did not improve fruit size distribution and return bloom. The third experiment was conducted in the 2007/8 season where the effect of rate and timing of BA applications was evaluated. Two rates, 150 and 200 mg.l-1 were applied 8, 11 and 17 days after full bloom (d.a.f.b.). There was no significant interaction between BA rate and application time. The 200 mg.l-1 rate and the 11 d.a.f.b. (i.e. 8 to 10 mm average fruit size) applications were more effective in reducing crop load, and improving fruit size. BA at 150 and 200 mg.l-1 and at all application times significantly improved return bloom relative to the control. From these trials we concluded that BA is a reliable thinner for ‘Early Bon Chrétien’ at rates of 100 or 150 mg.l-1. On ‘Forelle’, BA is not a reliable thinner and we recommended further trials with BA in combination with other thinning agents. In the third trial, three experiments were conducted in the 2007/8 season to investigate the mode of action and effect of BA application time on European pear cultivars. The effect of site of application, bourse shoot growth and fruit size at time of application on the efficacy of BA was evaluated. Results from the experiments on the effect of site of application and bourse shoot growth were inconclusive. In terms of fruit abscission, there was a significant interaction between BA application time and fruitlet size. Early BA applications (8 d.a.f.b.) were significantly more effective in promoting fruit abscission, than later (11 and 17 d.a.f.b.) applications. Smaller fruit (6 to 8 mm) were found to be more susceptible to BA-induced fruit abscission than bigger fruit (8 to 12 mm).

Thesis (MScAgric)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: Producing fruit of the appropriate size and high quality is of the upmost importance to realize a profit in the fruit industry. This can be achieved through bloom or fruitlet thinning to reduce the number of fruit left on the tree. The cost of production is rising and labour cost forms a large part of the total production cost. Thinning of stone fruit is labour intensive and expensive, so an alternative to hand thinning needs to be found. Two alternatives are chemical and mechanical thinning. Chemical thinners are not routinely used in stone fruit as it is in pome fruit production and gibberellins were evaluated in this study. The Darwin 300TM was evaluated as a mechanical alternative to hand thinning. It thins flowers during bloom, before fruitlet thinning by hand is performed. In our trials on nectarines and Japanese plums the objective of reducing the time required for hand thinning was achieved, with the Darwin 300TM reducing the time required by up to 50%. When the time required to thin was reduced too much it also reduced the yield, but this could be overcome by lowering the rotor speed or using different strategies during supplementary hand thinning at the fruitlet stage. The bloom thinning and reduction in yield led to an increase in the fruit size. Care should be taken when using the Darwin 300TM as the earlier thinning could increase pit splitting and/or fruit cracking, especially in cultivars that are sensitive to these defects. The optimal rate of thinning needs to be determined for each cultivar individually. The application of gibberellic acid (GA3) and gibberellin A4+7 (GA4+7) at the pit hardening stage in the previous season could decrease the number of flowers for the following growing season. There was no effect on the yield at harvest or fruit size in the season of GA3 and GA4+7 applications, but the fruit firmness was increased. This effect was more pronounced for the GA4+7 applications. Our objective of reducing the time required for thinning was achieved in some but not all cultivars. The yield was not significantly reduced, with the fruit maturity only delayed in ‘African Rose’ plum. Again no increase in fruit size was found, but the fruit firmness was again increased. The GA-applications therefore were not satisfactory in their reduction of the time required for hand thinning. A positive effect is the increase in fruit firmness, which could possibly increase the storage potential of the fruit without having negative effects on the other aspects of fruit quality but this needs further evaluation. / AFRIKAANSE OPSOMMING: Produksie van vrugte met die verlangde vruggrootte en hoë vrug kwaliteit is baie belangrik vir die realisering van ‘n wins in die vrugte-industrie. Met hierdie mikpunt in gedagte, is blom- en vruguitdunning baie belangrik om die aantal vrugte per boom te verminder. Die kostes geassosieer met vrugte produksie is besig om te styg en arbeidskoste vorm ‘n groot deel van die totale produksiekostes. Uitdunning van steenvrugte is arbeidsintensief en baie duur, dus moet ‘n alternatief vir handuitdunning gevind word. Daar is twee alternatiewe naamlik chemiese en meganiese uitdunning. Chemiese uitdunmiddels word algemeen in kernvrugproduksie gebruik, maar daar is tans geen chemiese middels vir steenvrugte nie. In hierdie studie was gibberelliene ge-evalueer as potensiële uitdunmiddel. Die Darwin 300TM is ge-evalueer gedurende blomtyd as ‘n meganiese alternatief vir handuitdunning. Die masjien verwyder blomme en verminder so die vruguitdunning benodig. In ons eksperimente op nektarien- en Japanese pruimkultivars het ons gevind dat die tyd benodig vir handuitdunning met tot 50% verminder is deur die Darwin 300TM. Dit het ook daartoe gelei dat die totale oes per boom verlaag is. Hierdie effek kan vermy word deur die rotor spoed te verminder of die strategie vir aanvullende handuitdunning aan te pas. Die feit dat die grootste deel van die uitdunproses in blomtyd uitgevoer is en ook die feit dat die totale oes per boom verlaag is, het daartoe gelei dat die vrugte groter was. Die vroeër uitdunning met die Darwin 300TM kan egter lei tot ‘n verhoging in vrugkrake en gesplete pitte. Dit moet veral in gedagte gehou word by kultivars wat geneig is tot hierdie afwykings/defekte. Die optimum tempo van uitdunning moet vir elke kultivar individueel bepaal word. Wanneer gibberelliensuur (GA3) of gibberelien A4+7 (GA4+7) by pitverharding toegedien word in die vorige groeiseisoen, kan dit lei tot die vermindering van die hoeveelheid vrugte in die volgende seisoen. Daar was geen effek op die totale oes per boom en die vruggrootte tydens oes in die seisoen van aanwending nie, maar die vrugfermheid is verhoog. Die effek was hoër na die GA4+7 as na die GA3 aanwending. Die mikpunt om die tyd benodig vir handuitdunning te verminder, is in sommige kultivars bereik. Die oes per boom in die opvolgseisoen is weer eens nie verlaag nie, maar die vrug rypheid van ‘African Rose’ pruime is vertraag. Geen effek is op die vruggrootte opgemerk nie, maar die vrugfermheid was weer eens verhoog. Die GA-toedienings het dus nie bevredigend die tyd benodig vir handuitdunning verminder nie. ‘n Positiewe effek is die verhoging van die vrugfermheid, wat moontlik kan lei tot die verhoging van die opbergingspotensiaal van die vrugte sonder enige ander negatiewe effekte, maar hierdie aspek benodig verdere navorsing.