Spelling suggestions: "subject:"kloriddiffusion rate"" "subject:"kloridjondiffusion rate""
1 |
Chloride penetration into concrete structures exposed to the marine atmosphereUnknown Date (has links)
Chloride ions present in the marine atmosphere contained in marine aerosols is
investigated for a relationship with chloride that accumulated into concrete. Chloride
profiles are conducted on several concrete mixes containing fly ash, silica fume, and slag,
with water to cementitious ratios of 0.35, 0.41, and 0.47. The chloride accumulation in
concrete samples exposed to the environment is investigated with relation to the chloride
deposition from the marine atmosphere measured via the wet candle test. Results indicate
a possible relationship for the total accumulated chloride in the concrete with the
accumulated chloride deposition (wet candle). Over the exposure periods, concrete
specimens with 50% slag addition and 0.47 w/cm had the lowest average rates of chloride
accumulation for deposition under 100 g/m2day. Chloride accumulation was lower in
concrete containing 20% fly ash and 8% silica fume with 0.35 w/cm for chloride deposition
rates over 200 g/m2day. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2014. / FAU Electronic Theses and Dissertations Collection
|
2 |
Concrete diffusivity and its correlation with chloride deposition rate on concrete exposed to marine environmentsUnknown Date (has links)
The aim of this study was to investigate the diffusion of chloride ions into concrete samples that were exposed in scenarios that simulate the splash, tidal, atmospheric, and immersed portions of a marine structure. To study the atmospheric deposition, the project also investigated the relationship between chloride ion deposition on the wet candle and its accumulation into concrete samples. Results from the wet candle experiment indicated that between 2% and 45% of the chlorides deposited per square meter of exposed area could be found within the concrete samples. After 6 months, slag G1a blocks showed the most resistance to chloride penetration in the tidal and splash simulations. After 10 months of exposure, fly ash samples had the slowest rates of diffusion in the tidal simulation while the fly ash + silica fume samples and the slag samples measured similar rates of diffusion within the tidal zone. After 90 days of curing, cylinders composed of 20% fly ash & 8% silica fume measured the highest average resistivity values and were found to be less vulnerable to chloride ion penetration than the 20% fly ash and the 50% slag concrete through rapid migration tests. / by Victor Anthony Echevarria. / Thesis (M.S.C.S.)--Florida Atlantic University, 2012. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
3 |
Correlation of Chloride Diffusivity and Electrical Resistance for Cracked ConcreteUnknown Date (has links)
The durability of Reinforced Concrete (RC) structures in the Marine environment is
causing serious concern in the structural infrastructure. Reinforced concrete structures,
exposed to aggressive environments, are expected to last with little or no maintenance for
long periods of time. However, one of the most serious environmental exposures that
causes degradation is Chloride Diffusion, due to shrinkage, atmospheric corrosion, and
tide-induced wet and dry conditions at the air-water interfaces of coastal structures.
Therefore, chloride diffusivity, which correlates with the electrical resistivity, has a
significant impact on the durability of concrete. Concrete chloride diffusivity has been
experimented by multiple agencies and researchers on sound concrete, but there is a
considerable need for investigation of the durability of cracked concrete in the marine
environment. The two test methods carried out are presented: Standardized American Society for Testing
and Materials (ASTM) C1202 for Rapid Chloride Permeability (RCP) and ASTM D257
for Surface Resistivity (SR), and Nordtest (NT) Build 492 for Rapid Chloride Migration
(RCM) and Bulk Resistivity (BR) for both sound (uncracked) and cracked (micro and
macro) concrete. The limitations of the ASTM method, due to measurements before the
steady-state migration is reached, does not account for leakage in cracked concrete, and the
heating of the specimen due to higher current that increase the conductivity are indicated.
The Rapid Chloride Migration test provides for the non-steady state of diffusion. Again,
Bulk Resistivity, in contradistinction to Surface Resistivity is more accurate for cracked
concrete. The correlation betweeen RCM-BR are plotted. Chloride Permeability/Migration
is an important parameter that governs the Durability of Concrete.
The principal contribution is the highlighting of the inadequacy of the current widely used
standard ASTM C1202 for diffusivity testing, and the need for revision with further
investigation. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection
|
Page generated in 0.0601 seconds