The subject of this master’s thesis is a project documentation for development of a nursery school. The nursery school is situated on the outskirts of the city Příbor. The school is designed as a two-storey building and includes 4 classrooms, with total capacity reaching 60 pupils. The perimeter wall consists of Porotherm clay block walling system. The ceiling framework uses a combination of two systems; the prestress hollow core slabs Spiroll and reinforced concrete monolithic blocks. The roof is designed as a single skin cladding with a flat, green roof. The external thermal insulation composite system (Etics) is proposed for the insulation of the building. The outer walls are partially cladded with timber. Additionally, the combination of white rendering and timber cladding will form a modern looking building that fits within a new housing development. Furthermore, the plan includes an outside playground, with allotments and parking spaces on the premises for the use of a nursery school.

This diploma thesis deals with construction and technological project of apartment building in Brno – Slatina, Kigginsova street. Thesis focus on technological phase of monolithic rough superstructure and masonry work. For this phases were processed technogical specifications and controlling ad testing schedules. Within this thesis was also compiled technical report, solution of transport roads, technical report and drawings of site equipmet. For main object was compiled itemized budget, which was foundation for completing time schedule. In diploma thesis are further processed safety requirements and chosen construction details.

The subject of the diplom work was to prepare a detailed project documentation of the penzion with hippotherapy in Veseli nad Moravou. This is a document processing house with two floors and the building stables. The object of the pension are located accommodation rooms, dining room and especially apartment manager. The building is located 12 stables are housed boxes, feed stores and higienické facilities for guests.

The diploma thesis called ,,Sports center with restaurant in Holesov” is written in form of implementing project documentation and contains all requirements according to current laws. Proposed object is located on a plot 461/1 in Partyzanska street, Holesov. The object is separate building situated into north part of the plot. The designed building has two floors, no basement and is covered with flat roof. Foundations of the building are design as foundations strips with concrete slabs under column. Vertical carrier system, non-carrier constructions and separating constructions of the building contain ceramic clay block Porotherm. The carrier system is supported by reinforced concrete. Ceiling construction is made of ceiling panels Spiroll. The flat roof contains heat-insulation wedges and roof drains and overflows insurance for drainage. Main walls are covered with contact insulation system and the visual part of facade is made of facade blocks Cembrit Solid mounted to wooden grate which are attached to metal anchors. The object is divided into two main parts with shared entrance. First part is located in the ground floor and is designated for restaurant, bowling centre and back office including kitchen and bar. The other part of the building is designated for sports use. The ground floor contains two squash courts with facilities and first floor is divided into parts prepared for a gym and group lessons like spinning. This separate part has its own changing rooms and toilets with showers. The designed object is barrier-free. There is also a parking with 65 lots for vehicles. Four of them are designated for disabled visitors.

The aim of this master’s project is to develop project documentation of a new-built mountain hotel in Ostružná. This hotel is near the ski area Ramzová in Jeseníky. Foundation of my building is from ground reinforced concrete slab. My building is supported by clay block load-bearing walls and clay non-load bearing walls. Exterior building envelope is designed as an aluminum shingle ventilated facade. The slabs are from reinforced concrete. The roofs of this designed building are two, first is pitched roof with insulation over rafters and second is intensive green warm flat roof. This project contains HVAC concept, photovoltaic panel concept, heating concept in technical equipment of building part. The third part of my master’s project is energy assessment for the building.

The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.

The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.

The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.

This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.

The main contens of the thesis is solving a construction-technological project substructure and the upper shell construction of a polyfunctional building in Pardubice. Excavation and foundation work are done in section A and B1 and B2. Drilled piles are foundation of a polyfunctional building. Drilled piles are support of reinforced concrete grillage, which are from strips foundation and foundation pads. Cast-in-place concrete frame is a form of load-bearing structure, which contens plate ceilings, pillars and walls. Peripheral masonry is from hellow clay blocks, which are between cast-in-place concrete frame. Diploma thesis includes technical report, plan of building side, schedule and the budget of the building, technological instructions, radon prevent, control and testing plan, safety, balance resources, selected constructional details, machinery composition, bill of quantities.