Spelling suggestions: "subject:"play suspensions"" "subject:"play uspensions""
1 |
Flocculation of clay suspensions using synthetic polymersAnderson, Sandie Lanclyn. January 1986 (has links)
Thesis (M.S.)--Ohio University, August, 1986. / Title from PDF t.p.
|
2 |
Flocculation of clay suspensions using synthetic polymersAnderson, Sandie Lanclyn January 1986 (has links)
No description available.
|
3 |
Určování hydraulických charakteristik jílových suspensí / Determination of hydraulic characteristcs of clay suspensionsPetrová, Markéta January 2010 (has links)
This thesis is focused on determining the hydromechanical characteristics of clay suspensions, permeability and compressibility, where is the effective stress, the concentration of suspension and is the permeability. Because the compressibility or permeability can't be measured directly, I use Darcian mechanics of two-phase systems to compute the characteristics I wanted from a well- measurable quantities, measured in appropriate experiments. Work has been solved with the support of the project : Hydromechanical characteristics of clay suspensions. The first part deals with a mineralogical characteristics fylosilicates, characterization of kaolin deposits in the Bohemian Massif, physical chemistry of colloidal systems, electric double layers and electro kinetic potential. Experimental section follows later, which proceed from the assumption that the same concentration of kaolin suspension and an identical colloidal state, exposed to the same pressure-temperature conditions, exhibit the same values of hydro mechanical characteristics such as their evolution in time can be described as a continuous function. As the model, I chose the coagulated kaolin suspension. Coagulation are achieved by adding weight percent of solids . Suspension settles in a vertical cylinder of high with an inner diameter of , which...
|
4 |
Vývoj injektážních směsí pro dodatečné těsnění sypaných hrází / The development of grouting for additional sealing of embankment damsMichalčíková, Magdaléna January 2015 (has links)
Seal of sand or gravel by chemical injection is known and used for a long time. Chemical grouting are however expensive and sometimes the use of cement does not lead to desire effects. So it is trying to find new materials and methodologies injection arrangement works. To achieve savings of chemical products are added to a mixture clay and cement. Clay-cement grouting mix are used not only in order that they are better quality, but also because in this way proposed mixtures have a tendency to penetrate better into incoherent sediments that need additional sealant of chemical injection. For further possible reductions of economic terms the mixture is trying to replace the classic clay. As a suitable substitute for classic clay is to a certain extent the use of secondary raw materials. Above all it is fly ash. As a part of my thesis I deal with the appropriateness use of these materials and examining their properties in the mixture. It was found that by using fly ash were improving consistency of the fresh mixture, reducing the amount of water-cement ratio and reduce shrinkage of the mixture. On the other hand, by using fly ash has been increasing decantation, permeability atc. In the next stage of my work was examined the influence of the quality of cement, lime and liquefaction in the mixture. The aim of thesis is to propose the optimal injection mixture for additional sealing earth dams.
|
Page generated in 0.0934 seconds