Spelling suggestions: "subject:"goal lines anda mining -- south africa."" "subject:"goal lines anda mining -- south affrica.""
1 |
Die optimale benutting van Suid-Afrikaanse uitskotsteenkoolGrobbelaar, Christiaan Johannes 26 May 2014 (has links)
M.Phil. ( Energy Studies) / Please refer to full text to view abstract
|
2 |
The mining of South African thick coal seams: rock mechanics and mining considerationsGalvin, James Maurice 16 March 2015 (has links)
No description available.
|
3 |
Optimization of the coal reserve utilization at Grootegeluk Mine, Waterberg coalfield, with regards to the phosphorus content in coalVan Heerden, Carel Wilhelmus 17 March 2016 (has links)
Submitted to:
School of Mining Engineering, Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, South Africa
September 2015 / Most coal seams in the Waterberg Coalfield contain medium to high levels of phosphorus in coal. Thermal coal, which has a lower value than metallurgical coal, is produced from these coal seams. Metallurgical coal used as feed for char production has especially stringent phosphorous content specifications.
Phosphorous levels vary both laterally and vertically through the coal succession of the Vryheid Formation. If the coal horizons with elevated phosphorus could be identified and selectively removed, significant amounts coal could be saved and utilized as metallurgical coal through the life of the mine. Different mining horizons with regards to their phosphorus content have to be determined to increase the amount of char plant feed coal. Bench definitions and their techno-economic applications are therefore the main purpose of the current investigation.
Bench 11 is currently the only source utilized for char plant feed coal. The char plant is therefore entirely dependent on coal supply from Bench 11. This poses a risk on the continual production of char at Grootegeluk Mine. It was determined that this bench is not suitable for char plant feed coal in certain areas of the resource. A high phosphorus coal horizon was identified in the upper portion of the bench. If this coal is removed separately, the phosphorus content of the coal in the remaining portion of the bench would be suitable for char plant feed coal. This alternative step is dependent on the phosphorus distribution in the resource and may therefore not always be effective. No changes to the other bench definitions could be established that would increase the amount of potential char plant feed coal.
Three further aspects were investigated: The potential to reduce phosphorus in coal by means of coal beneficiation was determined. Results showed that phosphorus levels in coal cannot be lowered sufficiently by means of coal beneficiation. Secondly, the suitability of using different coal analyses to improve the estimation of phosphorus in coal was investigated. Results showed that phosphorus prediction and analyses cannot be enhanced nor replaced by other coal analyses. Lastly, the importance of Zone 1 as a source of low phosphorous coal was investigated. Zone 1 is currently not part of the mine plan, but if mined, it could be used as a source for blending; thereby increasing the amount of char plant feed coal from the reserves. In certain portions of the resource, utilizing Zone 1 may be the only feasible way of securing the continual supply of low phosphorus content coal.
Analytical exploration borehole data of phosphorus in coal is limited in certain areas of the resource. Due to the variability of phosphorus in the coal horizons, more borehole data is required to increase the estimation accuracy of phosphorus in the coal. Based on such data, mining horizons might be changed in future to secure more char plant feed coal.
|
4 |
Development and evaluation of a dense media cyclone for the Southern African mineral and coal industriesSingleton, J. D. 25 February 2014 (has links)
Dense media separation (DMS) plays an integral part in coal processing as well as in the upgrade
of low grade ore bodies prior to further processing like flotation and leaching. Various
separating vessels are used in DMS; of which the dense media (DM) cyclone is the most
common. However, the limited materials of construction available for DM cyclones leave the
industry with little choice. In addition, the DM cyclones available moved away from the basic
principles of classification hydrocyclones which is to reduce the turbulence in the feed chamber
in order to achieve improved efficiency. The ceramic tiled DM cyclones available in the market
have ceramic tiles installed perpendicular to each other in the feed chamber, which increase the
turbulence in the feed chamber at the expense of longer equipment life. For that reason, a
research project was initiated to establish the current installed base of DM cyclones in Southern
Africa and to develop and evaluate a DM cyclone with a laminar spiral feed chamber design to
reduce the turbulence when feeding the cyclone, whilst achieving the same or superior wear
properties.
Because Cavex is well proven in hard rock mining and coal classification, it was used as basis for the development of a DM cyclone. Individual moulds were developed and produced in order
to fabricate a Cavex DM cyclone with the exact laminar spiral feed chamber that exists when
moulded out of rubber. Afterwards, the Cavex ceramic tiled (CVXT) cyclone was manufactured,
installed and commissioned. Using the basic operating principles of hydrocyclones, the
predicted results were achieved. The 650CVXT results confirmed that a DM cyclone and a
classification cyclone are inherently the same piece of equipment; it is the selection criteria and
material of construction that differ. There is a definite benefit in focussing on metallurgical
efficiency in conjunction with wear properties, rather than equipment life (wear life) as the only
parameter during equipment fabrication. A simple way to achieve improved performance is to reduce the turbulence in the feed chamber. Further work must include the evaluation of the Cavex CVXT DM cyclone in near gravity coal
circuits and to investigate whether the same lower operating pressures (6D compared to
conventional 9D) will result in improved coal yield, as was illustrated successfully in the
separation of fluorspar by DMS, whilst achieving the desired ash contents. The work must
include detailed studies on the effect of feed pressure vs. yield/recovery, when the turbulence the feed chamber is reduced. Overall energy savings should be quantified by reducing the cyclone feed pressure.
|
5 |
An investigation into coal damage during blasting.Kabongo, Kaby Katomba January 1997 (has links)
A thesis submitted to the Faculty of Engineering, University of the
Witwatersrand, Johannesburg, in fulfilrMnt of the requirements for the
degreel of Doctor of Philosophy. / This thesis has investigated ways of exerting control over coal breaking during
blasting. Its ultimate objective has been to optimise the use of explosive energy in
blasting so as to ensure reduced production of coal fines in the comminution
process.
The investigations reported were conducted on laboratory models at a scale of a
controllable energy to enable the development of a theoretical background for the
thesis, However, the bulk of the work was undertaken insitu in surface and
underground coal operations. The research was conducted in three phases. The
first phase dealt with the approach to modelling the primary crushing mechanism
which generates the coal fines during the blasting operation. A laboratory
apparatus to simulate blast-generated dynamic loading was devised. Dynamic coal
crushing test conducted on a set of over 150 samples of coal showed an
exponential relationship; between the comminution energy and the subsequent coal
damage. A comminution index (Com ) characterising the ability of coal to generate
fines was derived.
The second phase of the research concerned the field investigations. This had the
following double aim: validating the hypothesis of the influence of the dynamic
loading of the shock waves and that of the inherent discontinuities imbedded in
coal on fines generation; and quantifying the problem of fines in the blasting
techniques currently used in the local mining industry. Three sites were used,
namely Kleinkopje of AMCOAL, Greenside of Goldfields and ATC, Tavistock of
JCI.
The investigations undertaken at Kleinkopje (surface mining operation) involved the
determination of discontinuities by logging inherent fractures appearing on 75
diamond drilled cores of coal and the monitoring of 76 blasts conducted on the
sites sampled for discontinuities. These investigations indicated a good correlation
between the fines observed in blasted piles and the fracture frequency of the pre"
existing fractures per metre of coal.
The work undertaken in underground collieries (Greenside and Tavistock)
demonstrated the enormity of the fines' problem in the local mining operations.
Approximately a third of the coal broken underground was observed, in 30 blasts
sampled and analysed, to fall into the category of fragments of under 6 mm termed
'coal fines', Which generate low income.
The third phase of the research dealt with the optimisation of coal breaking during
blasting. A series of 100 trial blasts was undertaken with the aim of searching for a
blasting technique that enables the generation of fewer coal fines. A number of
options were investigated. Trial blasts carried out were evaluated and their results
are discussed in this thesis.
The results of the fieldwork undertaken confirmed that fines generation is site
speolflc, However, the decoupling technique used with high VOD explosive
products may be successfully employed to reduced coal fines generation in strong
coals (few inherent fractures). / Andrew Chakane 2018
|
6 |
Characterisation and beneficiation of coal from the New Vaal Colliery, Sasolburg-Vereeniging Coalfield, South Africa, through the application of automated mineralogyPretorius, Donavan Johannes 11 November 2015 (has links)
M.Sc. (Geology) / The purpose of this study was to assess the MLA’s ability to characterise (e.g. modal mineralogy, elemental assay, particle size distribution, particle density distribution and mineral associations) a coal product from New Vaal Colliery, with the aim to determine any liberation and beneficiation characteristics. In general the MLA assessment on coal is comparatively new and novel, especially at Spectrum (University of Johannesburg), hence research in this regard is required. For the first time New Vaal coal product was characterised with the MLA 600 FEG SEM. The coal product supplied to Lethabo Power Station for the study’s samples, consisted of Top Seam and Middle Seam coal from New Vaal Colliery which is located in the Cornelia subbasin of the Vereeniging-Sasolburg coalfield, South Africa. The proximate analysis characterised the coal as a high-ash (42.25% air-dried) and low calorific value (13.92 MJ/kg air-dried) product. Chemically SiO2 was the most abundant oxide followed by Al2O3 for the XRF analysis, which was mostly derived from the abundant kaolinite clay mineral (determined by petrography, XRD and MLA analysis). Mineralogically inertinite was the most abundant coal maceral encountered during the petrographic analysis. With geochemical characterisation, chalcophile, siderophile, lithophile and radioactive trace elements were found to be mostly comparable to the global average.
|
7 |
A hydrogeological investigation of the Grootegeluk mineJohnstone, Andrew Clifford January 1989 (has links)
The study concerns an assessment of the hydrogeological impact of an open cast coal mine in the North Western Transvaal Province of South Africa. The hydrogeological impact of the mine is assessed in terms of groundwater quality and levels. A monitoring system was installed to enable the present and future impact of mining operations on the hydrogeological regime to be assessed. Grootegeluk Mine is situated in the Waterberg Coal Field of South Africa and began production in 1980. The mine extracts fifteen million tons of mine material annually from a single open pit. Forty percent of the mined material is saleable product and the remaining sixty percent is stacked on discard dumps. The Daarby fault forms the northern boundary of the open pit and serves to bring the younger Letaba and Clarens Formations into contact with the older Beaufort and Ecca Groups. The mine discards are deposited north of the fault on a different hydrogeological environment from which they are mined. Dewatering of the mine open pit has resulted in a steady decline in water levels in the Ecca Group, south of the Daarby fault. In contrast, water levels north of the Daarby fault in the Letaba and Clarens Formations have risen. The short term hydrochemical impact of the mine discard dumps and slimes dams have resulted in a rise in the calcium, sulphate, chloride, fluoride and nitrate concentrations of the ambient groundwater . The longer term hydrochemical impact from the waste dumps, acid mine drainage, is not evident at present in the groundwater below the waste dumps. However, it is expected to manifest itself during the next ten years. A monitoring system was installed at the mine to allow groundwater levels and quality to be monitored. By measuring groundwater quality and levels the impact of the mine on the regional hydrogeology can be monitored and assessed presently, and during the next forty years of production. Monitoring will also enable the timeous implementation of remedial measures at an early stage and eliminate the need for large late stage "clean up" operations. Future monitoring of both water levels and quality will be crucial in evaluating the mine's impact on the regional groundwater regimes over the next forty years of production. The remedial measures recommended for leachate presently emanating from the waste dumps and slimes dams north of the Daarby fault, are a number of collector wells drilled into the basalts and sandstone north of the Daarby fault. The proposed positions of the wells (boreholes) are as close as possible to the dumps and slimes dams with expansion taken into consideration. The boreholes should be designed to lower the water level in the vicinity of the dumps in order to create a nett groundwater gradient towards the dumps and as a result, halt the spread of leachate away from the dumps. Grootegeluk plans to backfill the open pit with plant discards on completion of the mining of zone 2. The backfilled material will consist of the currently produced plant waste and will be covered with overburden and topsoil. It is expected that the backfilling will have a major impact on groundwater quantity if no remedial measures are implemented. The two remedial measures discussed are chemical treatment of the discard material before backfilling or the continual abstraction of water from the pit resulting in a nett groundwater inflow into the pit. No material from the present waste dumps and slimes dams will be transported into the open pit as backfill material
|
8 |
A study of the correlation between dragline diggability and blasting technology at Syberfontein colliery.Frimpong, Mensah. January 1994 (has links)
A project report submitted to the Faculty of Engineering,
University of the Witwatersrand, Johannesburg, in partial
fulfilment of the requirements for the degree of Master
ofil science in Engineering. / Given the high capital intensity of the dragline
operation, the mine can not afford to" tolerate
fragmentation problems with its concomitant low dragline
productivities. At Syferfontein colliery very large
boulders and completely unfraqmented sections resulting
in Low digging efficiency of the dragline were
encountered in the interburden blast,
This project, investigates the causes of the blasting
related problems with an intent of improving dragline
productivity at the minimum possible cost. This is
achieved through blast monitoring, evaluation of the
existing practice (blast design) using empirical relations,
fragmentation assessment using a model, analysis of operators
performance and dragline
availabilities. Dragline productivity is evaluated in the
light of the various productivity indices , viz, fill
factor, fill time and BCM/H. The results indicated
explosive incompatibility with the blasting environment
and. questionable practices regarding blast design and
Delay performance. Engineering field controls such as
reduction in drill pattern, reduction of VODof explosive
and improvement in draqline utilisation are found
necessary.
Contributing 61% to the total cost I concentrating on
reducing draqline cost must receive preference over
drilling and blasting cost as it would produce the most
tangible advantage in any cost reduction effort.
Regression equations relating cbst and productivity are
established. / Andrew Chakane 2018
|
9 |
Assessing how an adaptive management approach was incorporated in the mitigation strategies for acid mine drainage discharge in the Witwatersrand basinRantsieng, Masekantsi Rahab January 2018 (has links)
School of Mining Engineering, Centre for Sustainability in Mining and Industry, University of the Witwatersran, 2018 / The predicaments faced by humanity today differ from the past due to the increasing scale of human influence, complexities and uncertainties (Allen et al., 2010), which limit management options. Adaptive management is based on the philosophy that knowledge is incomplete i.e. there will always be uncertainty and unpredictability in the behaviour and dynamics of complex social-ecological systems. Given the complexity of the South African mining industry, this research aimed to explore the link between management and science by assessing the extent to which an adaptive management approach had been incorporated into short-term and long-term mitigation strategies for the discharge of acid mine water in the Witwatersrand Basin.
The methodology included a review of the adopted mitigation strategy document, a literature review of adaptive management literature and an in-depth analysis of a case study using nine interviews, conducted with key informants and contributors from the government, an educational institution, industry (mines currently dealing with the issue), and civil society. An inductive and descriptive approach was followed to gather and analyse data to formulate answers to the research questions.
The findings of the study indicated that the efforts that went into designing the short-term solutions were limited due to the lack of communicating amongst stakeholders and the failure to incorporate a value-based approach. Results also showed that complexities and uncertainties were not addressed to allow for adaptation to constant change. It was found that the short-term interventions had no managerial flexibility which limited learning. Insufficient monitoring and a lack of transparency regarding the dissemination of monitoring results were highlighted. Moreover, experimental efforts were limited due to lack of capacity and funding. In conclusion, although the long-term strategy incorporated some aspects of adaptive management, the short-term mitigation measures were reactive rather than proactive.
It is recommended that on-going training and good communication are maintained amongst stakeholders. Recommendations for economic constraints include the sharing of costs through partnerships, evaluating trade-offs between costs and effectiveness and investigating cheaper measuring methods for monitoring. Risk-averse initiatives such as conducting risk assessments during pilot studies and accommodating for different project scales can be employed to mitigate against resources that are sensitive to change. / XL2019
|
10 |
Investigations into the effect of size and width to height ratio on the strength of the laboratory sized coal specimensCanbulat, Ismet January 1996 (has links)
A dissertation submitted to the Faculty of Engineering, University of the
Witwatersrand, Johannesburg, in fulfilment of the requir tents for the degree of
Master of Science in Engineering. Johannesburg 1996. / The design of bord and pillar working in South
African collieries is based on the pillar strength
formula developed by Salamon and Munro1967 and
which has been used widely since then for designing
pillars. This formula is based on the statistical
analysis of 27 collapsed and 98 intact coal pillar
cases from collieries located in the Transvaal and
the Free state.
The main objective of this study is to establish the
difference in the strength of the coal material in
ditferent seams by means of laboratory testing. In
this manner, some 753 coal samples from 10
collieries from 4 seams were tested.
The size and width to height ratio effects on
strength were analysed. The size effect showed that
the difference between the seams was obvious, with a
difference of 59,4 per cent between the strongest
and weakest coal.
The statistical re-analysis showed that the strength
of the six blocks from the No 2 seam, Witbank
Coalfield occurred in a fairly tight strength range;
and that laboratory coal strengths from individual
seams or mines could deviate to a significant
although relatively small extent from the overall
average. / AC2017
|
Page generated in 3.4899 seconds