Spelling suggestions: "subject:"coaxial cables"" "subject:"koaxial cables""
1 |
Characteristics of dielectric-loaded coaxial cables.Lau, Ming Chee January 1972 (has links)
The characteristics of all modes in the dielectric-loaded coaxial cable have been given. Reduction in attenuation by dielectric loading is possible for the dominant mode in these cables, including -cables with optimum-dimensions, if lossless or sufficiently low-loss dielectrics are used. For higher losses in the loading dielectric, higher frequencies are required to achieve attenuation reduction. No significant reduction in conductor losses can be achieved with cables whose dimensions are such that only the dominant mode can be supported.
Measurements of the attenuation coefficients of several lower order modes were carried out at S-band frequencies using a resonant cavity. Experimental observations agree favorably with theory for the TM modes. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate
|
2 |
ELECTROMAGNETIC PERFORMANCE OF A PORTED COAXIAL CABLE SENSOR (PCCS) SYSTEMHalevi, Cliff Hunter, 1956- January 1987 (has links)
An experimental analysis of the factors which affect the sensitivity of the Ported Coaxial Cable Sensor (PCCS) system is presented. The measured response profile of the test system is compared against variations of cable separation distance, soil conductivity and permittivity, and magnetic field intensity above the transmitter cable. These experiments show that higher conductivity and permittivity of the burial medium results in a decrease in the strength of the magnetic field above the transmitter cable, and that this results in a decrease in response number. The results of these experiments are compared with the results obtained from a theoretical analysis of a simplified model. An experimentally derived relationship between cable separation distance and response number, which is valid for all soil types, can be applied to predictably minimize variations in sensitivity, resulting in a response ratio for each cell which will not exceed 3:1.
|
3 |
Wave propagation along a shielded coaxial cable within a circular waveguideLee, Jen-Hwang January 2011 (has links)
Digitized by Kansas Correctional Industries
|
4 |
Circularly symmetric iris in coaxial waveguideNabulsi, Khalid Ali January 1980 (has links)
No description available.
|
5 |
Magnetic fields of an underground coaxial cable caused by return currents in the earthSiegel, Thomas A. January 1989 (has links)
Thesis (M.S.)--Ohio University, August, 1989. / Title from PDF t.p.
|
6 |
Investigation of the accuracy of Grover's method when solving for the mutual inductance of two single-layer coaxial coilsRohe, Stacy. January 2005 (has links)
Thesis (M.S.)--University of Missouri-Columbia, 2005. / The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (December 19, 2006) Includes bibliographical references.
|
7 |
Ceramic coaxial resonator filter in a CubeSat systemBakam Nguenouho, Odette Sandrine January 2017 (has links)
Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2017. / RF and microwave filters can be implemented using ceramic coaxial resonators. This technology has been widely employed in nanosatellite communications systems recently, owing to its large quality factor (Q), permitting them to have low loss and narrow bandwidth. Features such as high selectivity, high power handling, excellent rejection, and low passband insertion loss are just a few of the key performance areas offered by ceramic coaxial resonators. This feature makes them suitable for use in bandpass filters.
Applications with demanding specifications requiring low volume and mass make use of this technology. Fulfilling the required performance goals can be challenging, given the size and weight restriction. Difficulties such as finding the correct length of resonators and the coupling capacitors’ structure to meet the size restriction, limit the type of ceramic coaxial resonators to use.
This thesis presents the design of a bandpass filter using ceramic coaxial resonators, which provides evidence of the concept for F’SATI’s future needs. This design will be used in an imminent space mission and the intention is to mount the bandpass filter in the receiver communications system. An intensive investigation was conducted into the use of filters for nanosatellite communication systems. The Chebyshev LC ladder low pass prototype was used to derive the conventional bandpass filter. Thereafter, the coupled resonator bandpass filter was derived using the conventional bandpass filter topology combined with the admittance inverter. Following this, using the ceramic coaxial resonators datasheet and information provided by the manufacturers, the coupled resonator bandpass filter was converted into a 3D model for further simulations, using CST Microwave Studio®. The ceramic coaxial resonator filter fabricated using Rogers’s material provided satisfactory results at its operating frequency between 2.2 GHz and 2.3 GHz. A radiation level test was performed on the filter to justify the use of the metallic enclosure. The test presented a low level of radiation measured at the filter operating frequency (2.25 GHz). The filter was also subjected to temperature cycling. / French–South African Institute of Technology (F’SATI)
National Research Foundation (NRF)
|
8 |
Electromagnetic modeling of distributed coaxial cable crack sensors in reinforced concrete membersWang, Mei, January 2008 (has links) (PDF)
Thesis (M.S.)--Missouri University of Science and Technology, 2008. / Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed March 31, 2008) Includes bibliographical references (p. 48-49).
|
9 |
Polymer fiber templates for the preparation of coaxial fibers and tubes, and as metal nanoparticle supportsDong, Hong. January 2005 (has links)
Thesis (Ph. D.)--State University of New York at Binghamton, Department of Chemistry, 2006. / Includes bibliographical references.
|
10 |
Novel die-to-die coaxial interconnect system for use in System-in-Package applicationsMcIntosh, Christopher Michael. January 2009 (has links) (PDF)
Thesis (MS)--Montana State University--Bozeman, 2009. / Typescript. Chairperson, Graduate Committee: Brock LaMeres. Includes bibliographical references (leaves 44-47).
|
Page generated in 0.0974 seconds