Spelling suggestions: "subject:"pode alidation"" "subject:"pode balidation""
1 |
On validation of a wheel-rail wear prediction codeSánchez Arandojo, Adrián January 2013 (has links)
During the past years, several tools have been developed to try predicting wheel and rail wear of railway vehicles in an e-cient way. In this MSc thesis a new wear prediction tool developed by I.Persson is studied and compared with another wear prediction tool, developed by T.Jendel, which has been already validated and is in use since several years ago. The advantages that the new model gives are simpler structure, the consideration of wear as a continuous variable and that all the code is integrated in the same software. The two models have the same methodology until the part of the wear calculations and the post-processing. Wheel-rail geometry functions and time domain simulations are performed with the software GENSYS. In the simulation model the track and the vehicle are dened as well as other important properties such as vehicle speed and coe-cient of friction. Three simple tracks are used: tangent track, R=500 m curve with a cant of ht=0.15 m on the outer rail and R=1000 m curve with a cant of ht=0.1 m on the outer rail. The model is assumed to be symmetric so just outer (first and fourth axle) and inner (second and third axles) wheels are considered. During the vehicle-track interaction, the normal and tangential problems are solved. The wheel-rail contact is modelled according to Hertz's theory and Kalker's simplied theory with the help of the algorithm FASTSIM. Then wear calculations are performed according to Archard's wear law. It is applied in dierent ways, obtaining wear depth directly in Jendel's and wear volume rate in Persson's model. Jendel's model is rstly analyzed. Its specifc methodology is briefly explained and modications are performed on the code to make it work as similar as possible to Persson's model. Also parameters regarding the distance in which wear calculations are taken, the discretization of the width of the wheel and the discretization of the contact patch are analyzed. The methodology of Persson's model is also studied, most of all the performance of the post-processing which is one of the keys to the code. The parameters analyzed in this code are the ones regarding a statistical analysis performed during the post-processing and the discretization of the contact patch. Finally the comparisons between the wear depth obtained for both models are carried out. The discrepancies between the models are explained with the parameters analyzed and the dynamic behaviour of both models. Also a theoretical case is used as reference for comparison.
|
2 |
Qualifizierung des Kernmodells DYN3D im Komplex mit dem Störfallcode ATHLET als fortgeschrittenes Werkzeug für die Störfallanalyse von WWER-Reaktoren - Teil 2Kliem, S., Grundmann, U., Rohde, U. 31 March 2010 (has links) (PDF)
Benchmark calculations for the validation of the coupled neutron kinetics/thermohydraulic code complex DYN3D-ATHLET are described. Two benchmark problems concerning hypothetical accident scenarios with leaks in the steam system for a VVER-440 type reactor and the TMI-1 PWR have been solved. The first benchmark task has been defined by FZR in the frame of the international association "Atomic Energy Research" (AER), the second exercise has been organised under the auspices of the OECD. While in the first benchmark the break of the main steam collector in the sub-critical hot zero power state of the reactor was considered, the break of one of the two main steam lines at full reactor power was assumed in the OECD benchmark. Therefore, in this exercise the mixing of the coolant from the intact and the defect loops had to be considered, while in the AER benchmark the steam collector break causes a homogeneous overcooling of the primary circuit. In the AER benchmark, each participant had to use its own macroscopic cross section libraries. In the OECD benchmark, the cross sections were given in the benchmark definition. The main task of both benchmark problems was to analyse the re-criticality of the scrammed reactor due to the overcooling. For both benchmark problems, a good agreement of the DYN3D-ATHLET solution with the results of other codes was achieved. Differences in the time of re-criticality and the height of the power peak between various solutions of the AER benchmark can be explained by the use of different cross section data. Significant differences in the thermohydraulic parameters (coolant temperature, pressure) occurred only at the late stage of the transient during the emergency injection of highly borated water. In the OECD benchmark, a broader scattering of the thermohydraulic results can be observed, while a good agreement between the various 3D reactor core calculations with given thermohydraulic boundary conditions was achieved. Reasons for the differences in the thermohydraulics were assumed in the difficult modelling of the vertical once-through steam generator with steam superheating. Sensitivity analyses which considered the influence of the nodalisation and the impact of the coolant mixing model were performed for the DYN3D-ATHLET solution of the OECD benchmark. The solution of the benchmarks essentially contributed to the qualification of the code complex DYN3D-ATHLET as an advanced tool for the accident analysis for both VVER type reactors and Western PWRs.
|
3 |
Qualifizierung des Kernmodells DYN3D im Komplex mit dem Störfallcode ATHLET als fortgeschrittenes Werkzeug für die Störfallanalyse von WWER-Reaktoren - Teil 2Kliem, S., Grundmann, U., Rohde, U. January 2002 (has links)
Benchmark calculations for the validation of the coupled neutron kinetics/thermohydraulic code complex DYN3D-ATHLET are described. Two benchmark problems concerning hypothetical accident scenarios with leaks in the steam system for a VVER-440 type reactor and the TMI-1 PWR have been solved. The first benchmark task has been defined by FZR in the frame of the international association "Atomic Energy Research" (AER), the second exercise has been organised under the auspices of the OECD. While in the first benchmark the break of the main steam collector in the sub-critical hot zero power state of the reactor was considered, the break of one of the two main steam lines at full reactor power was assumed in the OECD benchmark. Therefore, in this exercise the mixing of the coolant from the intact and the defect loops had to be considered, while in the AER benchmark the steam collector break causes a homogeneous overcooling of the primary circuit. In the AER benchmark, each participant had to use its own macroscopic cross section libraries. In the OECD benchmark, the cross sections were given in the benchmark definition. The main task of both benchmark problems was to analyse the re-criticality of the scrammed reactor due to the overcooling. For both benchmark problems, a good agreement of the DYN3D-ATHLET solution with the results of other codes was achieved. Differences in the time of re-criticality and the height of the power peak between various solutions of the AER benchmark can be explained by the use of different cross section data. Significant differences in the thermohydraulic parameters (coolant temperature, pressure) occurred only at the late stage of the transient during the emergency injection of highly borated water. In the OECD benchmark, a broader scattering of the thermohydraulic results can be observed, while a good agreement between the various 3D reactor core calculations with given thermohydraulic boundary conditions was achieved. Reasons for the differences in the thermohydraulics were assumed in the difficult modelling of the vertical once-through steam generator with steam superheating. Sensitivity analyses which considered the influence of the nodalisation and the impact of the coolant mixing model were performed for the DYN3D-ATHLET solution of the OECD benchmark. The solution of the benchmarks essentially contributed to the qualification of the code complex DYN3D-ATHLET as an advanced tool for the accident analysis for both VVER type reactors and Western PWRs.
|
4 |
Quantified PIRT and uncertainty quantification for computer code validationLuo, Hu 05 December 2013 (has links)
This study is intended to investigate and propose a systematic method for uncertainty quantification for the computer code validation application. Uncertainty quantification has gained more and more attentions in recent years. U.S. Nuclear Regulatory Commission (NRC) requires the use of realistic best estimate (BE) computer code to follow the rigorous Code Scaling, Application and Uncertainty (CSAU) methodology. In CSAU, the Phenomena Identification and Ranking Table (PIRT) was developed to identify important code uncertainty contributors. To support and examine the traditional PIRT with quantified judgments, this study proposes a novel approach, the Quantified PIRT (QPIRT), to identify important code models and parameters for uncertainty quantification. Dimensionless analysis to code field equations to generate dimensionless groups (�� groups) using code simulation results serves as the foundation for QPIRT. Uncertainty quantification using DAKOTA code is proposed in this study based on the sampling approach. Nonparametric statistical theory identifies the fixed number of code run to assure the 95 percent probability and 95 percent confidence in the code uncertainty intervals. / Graduation date: 2013 / Access restricted to the OSU Community, at author's request, from Dec. 5, 2012 - Dec. 5, 2013
|
5 |
Input Calibration, Code Validation and Surrogate Model Development for Analysis of Two-phase Circulation Instability and Core Relocation PhenomenaPhung, Viet-Anh January 2017 (has links)
Code validation and uncertainty quantification are important tasks in nuclear reactor safety analysis. Code users have to deal with large number of uncertain parameters, complex multi-physics, multi-dimensional and multi-scale phenomena. In order to make results of analysis more robust, it is important to develop and employ procedures for guiding user choices in quantification of the uncertainties. The work aims to further develop approaches and procedures for system analysis code validation and application to practical problems of safety analysis. The work is divided into two parts. The first part presents validation of two reactor system thermal-hydraulic (STH) codes RELAP5 and TRACE for prediction of two-phase circulation flow instability. The goals of the first part are to: (a) develop and apply efficient methods for input calibration and STH code validation against unsteady flow experiments with two-phase circulation flow instability, and (b) examine the codes capability to predict instantaneous thermal hydraulic parameters and flow regimes during the transients. Two approaches have been developed: a non-automated procedure based on separate treatment of uncertain input parameters (UIPs) and an automated method using genetic algorithm. Multiple measured parameters and system response quantities (SRQs) are employed in both calibration of uncertain parameters in the code input deck and validation of RELAP5 and TRACE codes. The effect of improvement in RELAP5 flow regime identification on code prediction of thermal-hydraulic parameters has been studied. Result of the code validations demonstrates that RELAP5 and TRACE can reproduce qualitative behaviour of two-phase flow instability. However, both codes misidentified instantaneous flow regimes, and it was not possible to predict simultaneously experimental values of oscillation period and maximum inlet flow rate. The outcome suggests importance of simultaneous consideration of multiple SRQs and different test regimes for quantitative code validation. The second part of this work addresses core degradation and relocation to the lower head of a boiling water reactor (BWR). Properties of the debris in the lower head provide initial conditions for vessel failure, melt release and ex-vessel accident progression. The goals of the second part are to: (a) obtain a representative database of MELCOR solutions for characteristics of debris in the reactor lower plenum for different accident scenarios, and (b) develop a computationally efficient surrogate model (SM) that can be used in extensive uncertainty analysis for prediction of the debris bed characteristics. MELCOR code coupled with genetic algorithm, random and grid sampling methods was used to generate a database of the full model solutions and to investigate in-vessel corium debris relocation in a Nordic BWR. Artificial neural networks (ANNs) with classification (grouping) of scenarios have been used for development of the SM in order to address the issue of chaotic response of the full model especially in the transition region. The core relocation analysis shows that there are two main groups of scenarios: with relatively small (<20 tons) and large (>100 tons) amounts of total relocated debris in the reactor lower plenum. The domains are separated by transition regions, in which small variation of the input can result in large changes in the final mass of debris. SMs using multiple ANNs with/without weighting between different groups effectively filter out the noise and provide a better prediction of the output cumulative distribution function, but increase the mean squared error compared to a single ANN. / Validering av datorkoder och kvantifiering av osäkerhetsfaktorer är viktiga delar vid säkerhetsanalys av kärnkraftsreaktorer. Datorkodanvändaren måste hantera ett stort antal osäkra parametrar vid beskrivningen av fysikaliska fenomen i flera dimensioner från mikro- till makroskala. För att göra analysresultaten mer robusta, är det viktigt att utveckla och tillämpa rutiner för att vägleda användaren vid kvantifiering av osäkerheter.Detta arbete syftar till att vidareutveckla metoder och förfaranden för validering av systemkoder och deras tillämpning på praktiska problem i säkerhetsanalysen. Arbetet delas in i två delar.Första delen presenterar validering av de termohydrauliska systemkoderna (STH) RELAP5 och TRACE vid analys av tvåfasinstabilitet i cirkulationsflödet.Målen för den första delen är att: (a) utveckla och tillämpa effektiva metoder för kalibrering av indatafiler och validering av STH mot flödesexperiment med tvåfas cirkulationsflödeinstabilitet och (b) granska datorkodernas förmåga att förutsäga momentana termohydrauliska parametrar och flödesregimer under transienta förlopp.Två metoder har utvecklats: en icke-automatisk procedur baserad på separat hantering av osäkra indataparametrar (UIPs) och en automatiserad metod som använder genetisk algoritm. Ett flertal uppmätta parametrar och systemresponser (SRQs) används i både kalibrering av osäkra parametrar i indatafilen och validering av RELAP5 och TRACE. Resultatet av modifikationer i hur RELAP5 identifierar olika flödesregimer, och särskilt hur detta påverkar datorkodens prediktioner av termohydrauliska parametrar, har studerats.Resultatet av valideringen visar att RELAP5 och TRACE kan återge det kvalitativa beteende av två-fas flödets instabilitet. Däremot kan ingen av koderna korrekt identifiera den momentana flödesregimen, det var därför ej möjligt att förutsäga experimentella värden på svängningsperiod och maximal inloppsflödeshastighet samtidigt. Resultatet belyser betydelsen av samtidig behandling av flera SRQs liksom olika experimentella flödesregimer för kvantitativ kodvalidering.Den andra delen av detta arbete behandlar härdnedbrytning och omfördelning till reaktortankens nedre plenumdel i en kokarvatten reaktor (BWR). Egenskaper hos härdrester i nedre plenum ger inledande förutsättningar för reaktortanksgenomsmältning, hur smältan rinner ut ur reaktortanken och händelseförloppet i reaktorinneslutningen.Målen i den andra delen är att: (a) erhålla en representativ databas över koden MELCOR:s analysresultat för egenskaperna hos härdrester i nedre plenum under olika händelseförlopp, och (b) utveckla en beräkningseffektiv surrogatsmodell som kan användas i omfattande osäkerhetsanalyser för att förutsäga partikelbäddsegenskaper.MELCOR, kopplad till en genetisk algoritm med slumpmässigt urval användes för att generera en databas av analysresultat med tillämpning på smältans omfördelning i reaktortanken i en Nordisk BWR.Analysen av hur härden omfördelas visar att det finns två huvudgrupper av scenarier: med relativt liten (<20 ton) och stor (> 100 ton) total mängd omfördelade härdrester i nedre plenum. Dessa domäner är åtskilda av övergångsregioner, där små variationer i indata kan resultera i stora ändringar i den slutliga partikelmassan. Flergrupps artificiella neurala nätverk med klassificering av händelseförloppet har använts för utvecklingen av en surrogatmodell för att hantera problemet med kaotiska resultat av den fullständiga modellen, särskilt i övergångsregionen. / <p>QC 20170309</p>
|
Page generated in 0.377 seconds