Yes / A microstrip line-fed wideband printed antenna is presented for radio detection of partial discharge (PD). The novel simple structure antenna has compact size of 24 × 20 × 0.16 cm3 (0.28λs × 0.23 λs × 0.002 λs) and suitable for radiometric PD wireless sensor nodes, where λs is the wavelength of the lowest frequency of the band (i.e., 0.35 GHz). The stepped and beveled radiation patch is used in combination with a slotted ground plane to achieve a wide fractional bandwidth of 119% (0.35 to 1.38 12 GHz) for a return loss better than 10 dB. Good radiation pattern characteristics are obtained across the frequency band of interest. The match between simulated and experimental results suggests that the design is sound and robust.

No / In this paper, a compact microstrip band-pass filter (BPF) covering the 3.4 to 3.8 GHz spectrum bandwidth for 5G wireless communications is presented. The planar filter uses three resonators, each terminated by a via to hole ground at one end and a capacitor at the other end with 50 Ω transmission line impedances for input and output terminals. The coupling between the lines is adjusted to resonate at the centre frequency with third-order band-pass Butterworth properties. The proposed combline filter is designed on an alumina substrate with a relative dielectric constant of 9.8 and a very small size of 9×5×1.2 mm3. The proposed filter is simulated and optimized using CST microwave studio software. / European Union’s Horizon 2020 research and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424, UK Engineering and Physical Sciences Research Council (EPSRC) under grant EP/E022936/1