In this thesis, we design a robust concatenated code for the Multiple-Input Multiple-Output (MIMO) system in the presence of slow Rayleigh fading with no channel side information at the transmitter (no CSIT) and perfect channel side information at the receiver (perfect CSIR). Since we are interested in the slow fading channel, outage capacity is used as the measure of performance. Good space-time codes can be designed so as to maximize the so-called rank and the determinant criteria. However, a practical system will concatenate a space-time code with an outer code at the transmitter and perform iterative decoding at the receiver. It is necessary to design the space-time code together with the outer code in practice. We will call this kind of code a concatenated space-time code. At the transmitter, we will consider the bit-to-symbol mapping and space-time code together as a space-time modulator and thus, Bit Interleaved Coded Modulation (BICM) and Multilevel coding (ML) can be applied to design outer codes for the nonbinary constellation. However, the concatenated space-time codes designed by these two methods can only be decoded with arbitrarily small error probability for a fixed channel realization and such designs are not robust over the ensemble of fading channels. Our approach of designing concatenated space-time code is to design an outer code for a space-time modulator such that the concatenated space-time code can be decoded with arbitrarily small error probability in a set of fixed channels which have the same capacity. Through this approach, we discovered a new design criterion for spacetime codes: a good space-time code should stabilize its Extrinsic Information Transfer (EXIT) charts. In other words, the robustness of a space-time code in the slow fading channel and its performance in iterative decoding can be visualized by the EXIT charts. The rank and the determinant criterion do not evaluate the performance of a space-time code in iterative decoding, but the new criterion does. Therefore, the new criterion is applicable to design concatenated space-time codes. Applying our approach and new criterion, a rate 7.2 bits/s/Hz concatenated space-time code is designed. The performance is close to the outage capacity, and the rate lost is 0.2 bits/s/Hz.

International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California / How to rise the reliability of the data transmission is one of the main problem faced by modern digital communication designers. This paper studies the error-correcting codes being suitable for the channel existing both the random and burst error. A new error control scheme is given. The scheme is a concatenated coding system using an interleaved Reed-Solomon code with symbols over GF (24) as the outer code and a Viterbi-decoded convolutional code as the inner code. As a result of the computer simulation, it is proved that the concatenated coding system has a output at a very low bit error rate (BER)and can correct a lot of compound error patterns. It is suitable for the serious disturb channel existing both the random and burst error. This scheme will be adopted for a remote control system.

Optimising the throughput performance for wireless networks is one of the challenging tasks in the objectives of communication engineering, since wireless channels are prone to errors due to path losses, random noise, and fading phenomena. The transmission errors will be worse in a multihop scenario due to its accumulative effects. Network Coding (NC) is an elegant technique to improve the throughput performance of a communication network. There is the fact that the bit error rates over one modulation symbol of 16- and higher order- Quadrature Amplitude Modulation (QAM) scheme follow a certain pattern. The Scattered Random Network Coding (SRNC) system was proposed in the literature to exploit the error pattern of 16-QAM by using bit-scattering to improve the throughput of multihop network to which is being applied the Random Linear Network Coding (RLNC). This thesis aims to improve further the SRNC system by using Forward Error Correction (FEC) code; the proposed system is called Joint RLNC and FEC with interleaving. The first proposed system (System-I) uses Convolutional Code (CC) FEC. The performances analysis of System-I with various CC rates of 1/2, 1/3, 1/4, 1/6, and 1/8 was carried out using the developed simulation tools in MATLAB and compared to two benchmark systems: SRNC system (System-II) and RLNC system (System- III). The second proposed system (System-IV) uses Reed-Solomon (RS) FEC code. Performance evaluation of System IV was carried out and compared to three systems; System-I with 1/2 CC rate, System-II, and System-III. All simulations were carried out over three possible channel environments: 1) AWGN channel, 2) a Rayleigh fading channel, and 3) a Rician fading channel, where both fading channels are in series with the AWGN channel. The simulation results show that the proposed system improves the SRNC system. How much improvement gain can be achieved depends on the FEC type used and the channel environment.

Optimising the throughput performance for wireless networks is one of the challenging tasks in the objectives of communication engineering, since wireless channels are prone to errors due to path losses, random noise, and fading phenomena. The transmission errors will be worse in a multihop scenario due to its accumulative effects. Network Coding (NC) is an elegant technique to improve the throughput performance of a communication network. There is the fact that the bit error rates over one modulation symbol of 16- and higher order- Quadrature Amplitude Modulation (QAM) scheme follow a certain pattern. The Scattered Random Network Coding (SRNC) system was proposed in the literature to exploit the error pattern of 16-QAM by using bit-scattering to improve the throughput of multihop network to which is being applied the Random Linear Network Coding (RLNC). This thesis aims to improve further the SRNC system by using Forward Error Correction (FEC) code; the proposed system is called Joint RLNC and FEC with interleaving. The first proposed system (System-I) uses Convolutional Code (CC) FEC. The performances analysis of System-I with various CC rates of 1/2, 1/3, 1/4, 1/6, and 1/8 was carried out using the developed simulation tools in MATLAB and compared to two benchmark systems: SRNC system (System-II) and RLNC system (System- III). The second proposed system (System-IV) uses Reed-Solomon (RS) FEC code. Performance evaluation of System IV was carried out and compared to three systems; System-I with 1/2 CC rate, System-II, and System-III. All simulations were carried out over three possible channel environments: 1) AWGN channel, 2) a Rayleigh fading channel, and 3) a Rician fading channel, where both fading channels are in series with the AWGN channel. The simulation results show that the proposed system improves the SRNC system. How much improvement gain can be achieved depends on the FEC type used and the channel environment. / Indonesian Government and the University of Bradford