Developing  a part of project documentation for a multifunctional house is the main subject of my thesis.This particular object is planned for a constructional lot in a district of Hodonín. Building has  four levels,  is separately standing, made of brick and does not have any cellar.  First floor is intended for  business and service use. Second, third and fourth floor are designed for living. There are one-room, two-room and four-room flats. Multifunctional house is made of  calcium silicate blocks and will be covered with flat roof.

This thesis describes the design and processing of project documentation multifunctional house. The multifunctional building is located in the central part of the city of Brno, in the district of Štýřice. This is a five-storey, basementless building with a flat roof on two levels. The building is based on foundations made of plain concrete. Supporting, peripheral and partition walls are designed from ceramic blocks POROTHERM. Ceiling construction is designed to be assembled of ceramic ceiling fittings MIAKO stored on POT beams. External walls of all floors are insulated using an external ETICS with thermal insulation made of mineral wool, which is replaced by XPS polystyrene used for plinth. Part of the facade is designed as ventilated, consisting of trusses of wood and sheathed by cladding panels CEMBRIT METRO. This architecturally divide the building into separate units. The building includes parts of the administrative, residential parts and parts for business purposes. On the first floor there are areas of common storage area of the apartment house, the main utility room, utility room. Furthermore, there is an administrative part, where are the reception facilities for reception, sanitary facilities for employees and office work. Part of the first floor is also a small shop with warehouse and facilities for employees. The second floor is a residential unit and the second part of the administrative unit. Third to the fifth floor is only residential and there are 6 residential units. All floors are connected by staircase and a wheelchair lift. In front of the building is designed parking lot for 20 cars. One of the parking space is wheelchair accessible.

The diploma thesis is about design and project documentation of fitness and wellness center. The designed object is situated in the outskirts of Havlíčkův Brod in a quiet environment and with direct connection to the city dam. The object is a three-storey partially-basement building with a flat green roof in three levels. The building is based on the base passages of plain concrete, reinforced concrete slabs and beads. The supporting, peripheral and partition walls are designed from the VELOX system. The outer casing consists of cement slab, reinforced concrete core and thermal insulation. In open-plan areas there are designed reinforced concrete columns. The ceiling structure is predominantly designed from reinforced concrete slabs to lost formwork. Part of the facade is plastered, the other part is ventilated. Individual architectural elements divide the object into units and fit into the natural landscape. The object is divided into several tracts where each has its own purpose and specification. In the 1st floor there is a gym, room for trainers and coordinating training room. In the center there is atrium, reception, cloakroom, buffet and public toilets. Vertical communication is possible using a suspended staircase or a hydraulic lift. On the 1st underground floor there is a reception desk and cloakroom for disabled people. In the western part of the tract there is an indoor pool with whirlpool, of course there are cloakrooms divided for men and women. The eastern part of the tract is used as a technical room of air-conditioning, there are also 3 saunas, including a relaxation room and dressing room. All facilities on the 1st underground floor have access to an outdoor park, including a dam and outdoor whirlpools. In the 2nd floor there is a staffing facility, an area for manegement, technical rooms and an outdoor green terrace. The designed object is designed for disabled people. Around the object there is designed a car park for 33 cars.

The subject of graduation thesis is a building-technological study of production and warehousing hall and headquarters of Ergon protected workshops in Třinec. The work is prepared on the basis of the project documentation. This consists of 8 building objects( 2 main building objects and 6 engineering objects). Building object SO 01-assembly and warehousing hall will be used for installation of assembly lines for simple mounting of imported parts and for semi automatic painting line equipment. Building object SO 02- headquarters building will be used for social activities of employees (WC. showers, social room , cloak rooms) and office premises. The main aims of graduation thesis are : project of construction site equipment including of time and economical evaluation, time schedule and financial plan for objects, study of main phases of project realisation for objects SO 01 and SO 02, project of main building machines including their radius( reach), time schedule of building object SO 02, technological prescript for steel construction preparation of object SO 01 with control and check plan.