Large amounts of hydrocarbon reserves are trapped in fractured reservoirs where fluid flux is far more rapid along fractures than through the porous matrix, even though the volume of the pore space may be a hundred times greater than the volume of the fractures. These are considered extremely challenging in terms of accurate recovery prediction because of their complexity and heterogeneity. Conventional reservoir simulators are generally not suited to naturally fractured reservoirs’ production history simulation, especially when production processes are associated with large pressure and temperature changes that lead to large redistribution of effective stresses, causing natural fracture aperture alterations. In this case, all the effective processes, i.e. hydraulic, thermal and geomechanical, should be considered simultaneously to explain and evaluate the behavior of stress-sensitive reservoirs over the production period. This is called thermo-hydro-mechanical (THM) coupling. In this study, a fully coupled thermo-hydro-mechanical approach is developed to simulate the physical behavior of fractures in a plane strain thermo-poroelastic medium. A hybrid numerical method, which implements both the finite difference method (FDM) and the displacement discontinuity method (DDM), is established to study the pressure, temperature, deformation and stress variations of fractures and surrounding rocks during production processes. This method is straightforward and can be implemented in conventional reservoir simulators to update fracture conductivity as it uses the same grid block as the reservoir grids and requires only discretization of fractures. The hybrid model is then verified with couple of analytical solutions for the fracture aperture variation under different conditions. This model is implemented for some examples to present the behavior of fracture network as well as its surrounding rock under thermal injection and production. The results of this work clearly show the importance of rate, aspect ratio (i.e. geometry) and the coupling effects among fracture flow rate and aperture changes arising from coupled stress, pressure and temperature changes. The outcomes of this approach can be used to study the behavior of hydraulic injection for induced fracturing and promoting of shearing such as hydraulic fracturing of shale gas or shale oil reservoirs as well as massive waste disposal in the porous carbonate rocks. Furthermore, implementation of this technique should be able to lead to a better understanding of induced seismicity in injection projects of all kinds, whether it is for waste water disposal, or for the extraction of geothermal energy.