This thesis proposes a new method for the generation of continuous spectra with possible applications in optical WDM access networks. This new method would allow the development of a continuum laser type structure with better performances in terms of cost and simplicity compared to the current supercontinuum sources. For this purpose, we have analyzed the possibility of extending the resonant modes of a Fabry-Perot cavity acting only on the design of one of the cavity mirrors. The design of the mirror is generated with a genetic algorithm targeting a desired reflectivity spectrum. An active medium is then added inside the cavity formed with the synthesized mirror and the cavity's emission is simulated below the lasing threshold. The spectra thus obtained are continuous on an interval of 5 to 15 nm.

Cette thèse propose une nouvelle méthode pour générer des spectres continus avec des applications possibles dans les réseaux d'accès optiques WDM. Cette nouvelle méthode devrait permettre le développement d'une structure laser type continuum avec de meilleures performances en termes de coût et de simplicité comparées aux sources supercontinuum actuelles. Dans ce but, nous avons analysé la possibilité d'élargir les modes résonants d'une cavité Fabry-Perot en n’agissant que sur la conception de l'un des miroirs de la cavité. La conception du miroir est réalisée avec un algorithme génétique en ciblant un spectre de réflectivité souhaitée. Un milieu actif est alors ajouté à l'intérieur de la cavité formée avec un tel miroir synthétisé et son comportement en dessous du seuil est simulé. Les spectres des cavités ainsi obtenues sont continus sur une bande de 5 à 15nm. / This thesis proposes a new method for the generation of continuous spectra with possible applications in optical WDM access networks. This new method would allow the development of a continuum laser type structure with better performances in terms of cost and simplicity compared to the current supercontinuum sources. For this purpose, we have analyzed the possibility of extending the resonant modes of a Fabry-Perot cavity acting only on the design of one of the cavity mirrors. The design of the mirror is generated with a genetic algorithm targeting a desired reflectivity spectrum. An active medium is then added inside the cavity formed with the synthesized mirror and the cavity’s emission is simulated below the lasing threshold. The spectra thus obtained are continuous on an interval of 5 to 15 nm.

Im ersten Teil wurde Probenvorbereitungs-Methoden und instrumentelle Methoden zur Organofluor-Bestimmung verglichen, um Vor- und Nachteile bei der Summenparameter-Analytik von per- und polyfluorierten Alkylverbindungen (PFAS) zu identifizieren. Daher wurden Oberflächenwasserproben aus der Spree in Berlin und Industrieabwasserproben mit zwei PFAS-Summenparametern analysiert – dem extrahierbaren (EOF) und dem adsorbierbaren organisch gebundenen Fluor (AOF). Beide PFAS-Summenparameter wurden mit zwei fluorsensitiven Detektionssystemen analysiert – Hochauflösender Kontinuumstrahler-Graphitofen Molekülabsorptionsspektrometrie (HR-CS-GFMAS) und combustion Ionenchromatographie (CIC). HR-CS-GFMAS erwies sich im Vergleich zu CIC als der empfindlichere und schnellere Ansatz mit höherer Präzision. Im zweiten Teil wurde eine neue Methode zur PFAS-Summenparameteranalyse und EOF-Bestimmung in Bodenproben auf Basis von HR-CS-GFMAS entwickelt und optimiert. EOF-Massenanteile wurden bei mehrfacher Extraktion und Nutzung der Festphasenextraktion (SPE) zur Entfernung anorganischen Fluors untersucht. Bei einem Vergleich der optimierten Methode mit und ohne SPE zeigte sich eine drastische Diskriminierung von Organofluor-Verbindungen mittels SPE. Im dritten Teil wurden Organofluor-Massenbilanzen in aquatischen Systemen anhand von Oberflächenwasser- und Schwebstoffproben (SPM) untersucht. SPM-Proben wurden mit vier komplementären Analysemethoden analysiert – target und non-target, direct total oxidizable precursor assay (dTOPA) und EOF. Daher wurden drei Organofluor-Massenbilanzansätze für die räumlich und zeitaufgelöste SPM-Probenanalyse verwendet: (I) Identifizierung von oxidierbaren PFAS-Vorläufer, (II) Identifizierung des Anteils der identifizierten und nicht identifiziertes EOF und (III) PFAS-target, PFAS dTOPA, non-target-Screening und EOF-Analyse, um das nicht identifizierte EOF aus Ansatz (II) weiter zu entschlüsseln. / In the first part, a comparison of sample preparation and instrumental methods for organofluorine determination was used to identify advantages and disadvantages in sum parameter analysis of per- and polyfluoroalkyl substances (PFASs). Therefore, surface water samples from the Spree River in Berlin, Germany and industrial effluent samples were analyzed using two PFAS sum parameters – the extractable (EOF) and adsorbable organically bound fluorine (AOF). Both PFAS sum parameters were analyzed using two fluorine sensitive detection systems – high-resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) and combustion ion chromatography (CIC). HR-CS-GFMAS turned out to be the more sensitive and faster approach accompanied with higher precision compared to CIC. In the second part, a new method for PFAS sum parameter analysis and EOF determination in soil samples based on HR-CS-GFMAS was developed and optimized. EOF mass fractions were investigated upon multiple extraction and utilization of solid phase extraction (SPE) for inorganic fluorine removal. In a comparison of the optimized method with and without SPE, a highly biased discrimination of organofluorines using SPE was shown. In the third part, organofluorine mass balances were investigated in aquatic systems using surface water and suspended particulate matter (SPM) samples. SPM samples were analyzed using 4 complementary analytical methods – target and non-target HRMS, direct total oxidizable precursor assay (dTOPA) and EOF. Therefore, 3 organofluorine mass balance approaches were used for SPM sample analysis in spatial and time resolved manner: (I) Identification of oxidizable PFAS precursors, (II) Identification of the proportion of identified and unidentified EOF and (III) PFAS target, PFAS dTOPA, non-target screening and EOF analysis to further unravel the unidentified EOF from approach (II).

The main goal of the work presented in this thesis is to improve the reliability of existing methods for speciation analysis of organotin compounds Species-specific isotope dilution (SSID) calibration in combination with gas chromatography – inductively coupled plasma mass spectrometry was used to investigate the transformation of phenyltin species during sample preparation. Isotope-enriched phenyltin species were synthesized from corresponding isotope-enriched tin metals. SSID with a mixture of phenyltin species (PhTs) from one isotope was used to evaluate different extraction procedures for the determination of PhTs in fresh water sediment. Preparative liquid chromatography was used to produce single isotope-enriched phenyltin species making a multi-isotope spike (MI) SSID calibration possible. Different extraction procedures for the analysis of phenyltin species in biological samples were evaluated by applying MI-SSID. Degradation of TPhT and DPhT during sample extraction was observed and quantified. Accurate results were therefore obtained. A sample preparation procedure using mild extraction conditions with reasonable recoveries is described. The stability of organotin standards was investigated under different storage conditions. Mono- and diphenyltin were found to be redistributed and degraded during storage in methanol but were stabilized in sodium acetate/ acetic acid. A fast redistribution between monobutyl- and diphenyl tin has been observed and therefore it is therefore recommended that standards be derivatized as soon as possible after butyl- and phenyltin standards are mixed. Included in the thesis is also an investigation of the analytical potential of using instrumentation based on atomic absorption spectrometry (AAS) for speciation analysis of organotin compounds. The method was based on gas chromatographic separation, atomization in a quartz tube and detection by line source (LS) AAS and for comparison, by state of the art continuum source (CS) AAS. Analytical performances of CSAAS system were found to be better compared to LSAAS.