In this thesis an educational test bench for studying the power quality attributes of the commonly used single-phase full-bridge diode rectifiers with power factor correction (PFC) circuits is designed and tested. This thesis covers the active and passive power factor correction methods for single-phase bridge rectifier. Passive filtering approach with dc side inductor and tuned filter along with active filtering approach via singleswitch boost converter is considered. Analysis, simulation, and design of a single phase rectifier and PFC circuits is followed by hardware implementation and tests. In the active PFC approach, various control methods is applied and compared. The educational bench is aimed to useful for undergraduate and graduate power electronics course, power quality related laboratory studies.

This dissertation aims at designing a three-phase voltage source inverter based on the SiC devices and mainly the SiC-MOSFET. The designed inverter offers a possibility to drive the power inverter with a very high efficiency, which can reach up to 99% for 16 kW rated power. The design is dedicated to the electric vehicle application, and it aims at • Providing a comparative study on some of the current discrete SiC devices in terms of the total losses and the thermal conductivity. In addition, a behavioral study of the effective channel mobility with temperature variation in the SiC MOSFET will be investigated. • Designing a gate driver which fits with the driving requirements of the SiC-MOSFET and provides a trade-off between the switching losses and the EMI behavior. • Designing a three-phase voltage source inverter with 16 kW rated power; the design includes minimizing the inverter losses and extracts the EMI model of the power inverter by considering the effects of the parasitic parameters; moreover a short guideline for selecting the heat-sink based on the static network is introduced. • Proposing a new and simplified carried-based PWM, this will reduce the harmonics in the output waveforms and enhance the utilization of the DC-link voltage. • Proposing a new strategy for compensating the dead-time effect in carrier based-PWM and to find out the proper dead-time level in VSI based on SiC –MOSFET. • Designing faults diagnosis and protection circuits in order to protect the power inverter from the common faults; overcurrent, short-circuit, overvoltage, and overtemperature faults.

This dissertation aims at designing a three-phase voltage source inverter based on the SiC devices and mainly the SiC-MOSFET. The designed inverter offers a possibility to drive the power inverter with a very high efficiency, which can reach up to 99% for 16 kW rated power. The design is dedicated to the electric vehicle application, and it aims at • Providing a comparative study on some of the current discrete SiC devices in terms of the total losses and the thermal conductivity. In addition, a behavioral study of the effective channel mobility with temperature variation in the SiC MOSFET will be investigated. • Designing a gate driver which fits with the driving requirements of the SiC-MOSFET and provides a trade-off between the switching losses and the EMI behavior. • Designing a three-phase voltage source inverter with 16 kW rated power; the design includes minimizing the inverter losses and extracts the EMI model of the power inverter by considering the effects of the parasitic parameters; moreover a short guideline for selecting the heat-sink based on the static network is introduced. • Proposing a new and simplified carried-based PWM, this will reduce the harmonics in the output waveforms and enhance the utilization of the DC-link voltage. • Proposing a new strategy for compensating the dead-time effect in carrier based-PWM and to find out the proper dead-time level in VSI based on SiC –MOSFET. • Designing faults diagnosis and protection circuits in order to protect the power inverter from the common faults; overcurrent, short-circuit, overvoltage, and overtemperature faults.