京都大学 / 0048 / 新制・課程博士 / 博士(情報学) / 甲第22099号 / 情博第709号 / 新制||情||122(附属図書館) / 京都大学大学院情報学研究科通信情報システム専攻 / (主査)教授 守倉 正博, 教授 原田 博司, 教授 梅野 健 / 学位規則第4条第1項該当 / Doctor of Informatics / Kyoto University / DFAM

The focus of this thesis is peak-to-average power ratio (PAPR) reduction in cooperative wireless networks which exploit orthogonal frequency division multiplexing in transmission. To reduce the PAPR clipping is employed at the source node. The first contribution focuses upon an amplify-and-forward (AF) type network with four relay nodes which exploits distributed closed loop extended orthogonal space frequency block coding to improve end-to-end performance. Oversampling and filtering are used at the source node to reduce out-of-band interference and the iterative amplitude reconstruction decoding technique is used at the destination node to mitigate in-band distortion which is introduced by the clipping process. In addition, by exploiting quantized group feedback and phase rotation at two of the relay nodes, the system achieves full cooperative diversity in addition to array gain. The second contribution area is outage probability analysis in the context of multi-relay selection in a cooperative AF network with frequency selective fading channels. The gains of time domain multi-path fading channels with L paths are modeled with an Erlang distribution. General closed form expressions for the lower and upper bounds of outage probability are derived for arbitrary channel length L as a function of end-to-end signal to noise ratio. This analysis is then extended for the case when single relay selection from an arbitrary number of relay nodes M is performed. The spatial and temporal cooperative diversity gain is then analysed. In addition, exact form of outage probability for multi-path channel length L = 2 and selecting the best single relay from an arbitrary number of relay nodes M is obtained. Moreover, selecting a pair of relays when L = 2 or 3 is additionally analysed. Finally, the third contribution context is outage probability analysis of a cooperative AF network with single and two relay pair selection from M available relay nodes together with clipping at the source node, which is explicitly modelled. MATLAB and Maple software based simulations are employed throughout the thesis to support the analytical results and assess the performance of algorithms and methods.

Doctor of Philosophy / Department of Electrical and Computer Engineering / Balasubramaniam Natarajan / Widely recognized security vulnerabilities in current wireless radio access technologies undermine the benefits of ubiquitous mobile connectivity. Security strategies typically rely on bit-level cryptographic techniques and associated protocols at various levels of the data processing stack. These solutions have drawbacks that have slowed down the progress of new wireless services. Physical layer security approaches derived from an information theoretic framework have been recently proposed with secret key generation being the primary focus of this dissertation. Previous studies of physical layer secret key generation (PHY-SKG) indicate that a low secret key generation rate (SKGR) is the primary limitation of this approach. To overcome this drawback, we propose novel SKG schemes to increase the SKGR as well as improve the security strength of generated secret keys by exploiting multiple input and multiple output (MIMO), cooperative MIMO (co-op MIMO) networks. Both theoretical and numerical results indicate that relay-based co-op MIMO schemes, traditionally used to enhance LTE-A network throughput and coverage, can also increase SKGR. Based on the proposed SKG schemes, we introduce innovative power allocation strategies to further enhance SKGR. Results indicate that the proposed power allocation scheme can offer 15% to 30% increase in SKGR relative to MIMO/co-op MIMO networks with equal power allocation at low-power region, thereby improving network security. Although co-op MIMO architecture can offer significant improvements in both performance and security, the concept of joint transmission and reception with relay nodes introduce new vulnerabilities. For example, even if the transmitted information is secured, it is difficult but essential to monitor the behavior of relay nodes. Selfish or malicious intentions of relay nodes may manifest as non-cooperation. Therefore, we propose relay node reliability evaluation schemes to measure and monitor the misbehavior of relay nodes. Using a power-sensing based reliability evaluation scheme, we attempt to detect selfish nodes thereby measuring the level of non-cooperation. An overall node reliability evaluation, which can be used as a guide for mobile users interested in collaboration with relay nodes, is performed at the basestation. For malicious behavior, we propose a network tomography technique to arrive at node reliability metrics. We estimate the delay distribution of each internal link within a co-op MIMO framework and use this estimate as an indicator of reliability. The effectiveness of the proposed node reliability evaluations are demonstrated via both theoretical analysis and simulations results. The proposed PHY-SKG strategies used in conjunction with node reliability evaluation schemes represent a novel cross-layer approach to enhance security of cooperative networks.

Cooperative diversity exploits the broadcast nature of wireless channels and uses relays to improve link reliability. Most cooperative communication protocols are assumed to be synchronous in nature, which is not always possible in wireless communication. Also the relay nodes are assumed to be half duplex which in turn reduces the spectral efficiency. In this thesis, we first present a novel asynchronous cooperative communication protocol exploiting polarization diversity, which does not require synchronization at the relay node. Dual polarized antennas are employed at the relay node to achieve full duplex amplify-and-forward (ANF) communication. Hence the transmission duration is reduced which results into an increased throughput rate. Capacity analysis of the proposed scheme ascertains the high data rate as compared to conventional ANF. Bit error rate (BER) simulation also shows that the proposed scheme significantly outperforms both the non-cooperative single-input single-output and the conventional ANF schemes. Considering channel path loss, the proposed scheme consume less total transmission energy as compared to ANF and non-cooperative scheme in more practical distance range. Thus the proposed scheme is suitable for high rate and energy efficient relay-enabled communication. In addition to that, we also present a novel power allocation scheme for multiple relay nodes that results in efficient cooperative multiple-input multiple-output (MIMO) communication. Considering channel path loss, the total transmission energy is distributed between the source and the relay nodes. The energy distribution ratio between the relay and direct link is optimized such that the quality of received signal is maintained with minimum total transmission energy consumption. We calculate the energy distribution ratio analytically and verified it through computer simulation. With the new power allocation scheme, the system also obtains an increased channel capacity as compared to cooperative scheme with conventional equal power allocation and non-cooperative scheme. Optimal relay positioning with proposed energy allocation scheme is also explored to maximize the capacity.

Dans cette thèse, le compromis entre la consommation d'énergie et le délai dans les réseaux de capteurs sans fil est étudié en exploitant efficacement les liens non fiables. Nous proposons une métrique de l'efficacité énergétique et une métrique de délai moyenne qui sont combinés avec le modèle de lien radio à erreur. En utilisant ces deux métriques et un modèle réaliste de lien radio, nous déduisons la limite inférieure et le front de Pareto du compromis Energie-Délai sont calculés pour trois types de systèmes de communication: la communication multi-saut traditionnelle, la communication opportuniste et la communication coopérative MIMO (CMIMO) dans trois différents canaux: le canal a bruit additif blanc Gaussien, le canal a évanouissements rapides de Rayleigh et le canal a évanouissement de Rayleigh par blocs. Les expressions de ces limites faibles sont obtenues et vérifiées par des simulations bidimensionnelles de réseaux de capteurs distribués aléatoirement. Sur la base de l'expression de la borne inférieure du compromis Energie-Délai, un cadre multi-couche est fourni pour optimiser les paramètres des couches physique, MAC et routage sous contrainte de délai. Les résultats obtenus montrent que pour parvenir à une meilleure performance Energie-Délai, les mécanismes de communication suivants devraient être adoptés selon le type de canal : les communications multi-saut traditionnelles sont les plus performantes pour le canal à bruit additif blanc Gaussien, alors que les communications opportunistes le sont pour les canaux à évanouissements de Rayleigh par blocs et enfin le CMIMO pour les canaux à évanouissements rapides de Rayleigh.