Spelling suggestions: "subject:"otherpurification"" "subject:"poorerpurification""
1 |
Evaluation of the first-order ternary interaction parameters for bismuth in molten copper using a novel distribution techniqueJiang, Xin Hua, 1963- January 1987 (has links)
The first order ternary interaction parameters of bismuth in molten copper containing either iron, arsenic or antimony have been evaluated using a pseudo equilibrium process at temperatures between 1398 K and 1473 K. The isopiestic distribution technique developed in this investigation yielded the following results: εFeBi=[(1.11x10⁶)/T]- 754 εAsBi=[(4.4x10⁴)/T]-24 εSbBi=-11 These results, coupled with other activity data, have been used to calculate the isoactivity curves for each constituent in the copper rich corner of each ternary system. The basis for the ternary interactions associated with εFeBi, εAsBi and εSbBi are also discussed.
|
2 |
Vacuum refining of copper matteAllaire, André. January 1986 (has links)
No description available.
|
3 |
Vacuum refining of copper matteAllaire, André January 1986 (has links)
No description available.
|
4 |
Removal of copper ion (CU2+) from industrial effluent by immobilized microbial cells.January 1991 (has links)
by So Chi Ming. / Thesis (M.Phil.)--Chinese University of Hong Kong, 1991. / Includes bibliographical references. / Acknowledgement --- p.i / Abstract --- p.ii / Chapter 1. --- Objectives of the Study --- p.1 / Chapter 2. --- Literature Review --- p.2 / Chapter 2.1 --- Heavy Metals in the Environment --- p.2 / Chapter 2.2 --- Heavy Metal Pollution in Hong Kong --- p.3 / Chapter 2.3 --- Chemistry and Toxicity of Copper in the Environment --- p.6 / Chapter 2.4 --- Conventional and Alternative Methods for Heavy Metal Removal --- p.10 / Chapter 2.5 --- Heavy Metal Removal by Microorganisms --- p.14 / Chapter 2.6 --- Factors Affecting Biosorption of Heavy Metals --- p.27 / Chapter 2.7 --- Applicability of Biosorbent in Heavy Metal Removal --- p.31 / Chapter 3. --- Materials and Methods --- p.36 / Chapter 3.1 --- Screening of Bacteria for Copper Removal Capacity --- p.36 / Chapter 3.1.1 --- Isolation of Bacteria from Activated Sludge --- p.36 / Chapter 3.1.2 --- Selection of Copper Resistant Bacteria from Water Samples --- p.37 / Chapter 3.1.3 --- Pre-screening of Bacteria for Copper Uptake --- p.37 / Chapter 3.1.4 --- Determination of Copper Removal Capacity of Selected Bacteria --- p.37 / Chapter 3.2 --- Effect of Culture Conditions on Copper Removal Capacity of Pseudomonas putida 5-X --- p.39 / Chapter 3.2.1 --- Effect of Nutrient Limitation --- p.39 / Chapter 3.2.2 --- Effect of Incubation Temperature and Culture Age --- p.41 / Chapter 3.3 --- Determination of Copper Uptake Mechanism of Pseudomonas putida 5-X --- p.41 / Chapter 3.3.1 --- Effect of Glucose and Sodium Azide on Copper Removal Capacity --- p.41 / Chapter 3.3.2 --- Transmission Electron Micrograph of Pseudomonas putida 5-X after Copper Uptake --- p.43 / Chapter 3.4 --- Effect of Pretreatment of Cells on Copper Removal Capacity of Pseudomonas putida 5-X --- p.43 / Chapter 3.5 --- Physico-chemical Characterization of Pseudomonas putida 5-X as Biosorbent for Copper Removal --- p.43 / Chapter 3.5.1 --- Determination of Copper Uptake Kinetics --- p.43 / Chapter 3.5.2 --- Determination of Freundlich Isotherm for Copper Uptake --- p.44 / Chapter 3.5.3 --- Effect of pH on Copper Removal Capacity --- p.44 / Chapter 3.5.4 --- Effect of Metal Ions on Copper Removal Capacity --- p.44 / Chapter 3.5.5 --- Effect of Anions on Copper Removal Capacity --- p.45 / Chapter 3.6 --- Copper Removal by Immobilized Cells of Pseudomonas putida 5-X --- p.45 / Chapter 3.6.1 --- Effect of Retention Time on Copper Removal Capacity of Immobilized Cells --- p.47 / Chapter 3.6.2 --- Efficiency of Copper Recovery from Immobilized Cells by Various Eluants --- p.47 / Chapter 3.6.3 --- Performance of Immobilized Cells on Multiple Copper Loading-elution Cycles --- p.48 / Chapter 3.6.4 --- Treatments of Effluent from an Electroplating Factory by Immobilized Cells --- p.48 / Chapter 4. --- Results --- p.49 / Chapter 4.1 --- Screening of Bacteria for Copper Removal Capacity --- p.49 / Chapter 4.2 --- Effect of Culture Conditions on Copper Removal Capacity of Pseudomonas putida 5-X --- p.49 / Chapter 4.2.1 --- Effect of Nutrient Limitation --- p.49 / Chapter 4.2.2 --- Effect of Incubation Temperature and Culture Age --- p.52 / Chapter 4.3 --- Determination of Copper Uptake Mechanism of Pseudomonas putida 5-X --- p.52 / Chapter 4.3.1 --- Effect of Glucose and Sodium Azide on Copper Removal Capacity --- p.52 / Chapter 4.3.2 --- Transmission Electron Micrograph of Pseudomonas putida 5-X after Copper Uptake --- p.52 / Chapter 4.4 --- Effect of Pretreatment of Cells on Copper Removal Capacity of Pseudomonas putida 5-X --- p.56 / Chapter 4.5 --- Physico-chemical Characterization of Pseudomonas putida 5-X as Biosorbent for Copper Removal --- p.56 / Chapter 4.5.1. --- Determination of Copper Uptake Kinetics --- p.56 / Chapter 4.5.2 --- Determination of Freundlich Isotherm for Copper Uptake --- p.56 / Chapter 4.5.3 --- Effect of pH on Copper Removal Capacity --- p.60 / Chapter 4.5.4 --- Effect of Metal Ions on Copper Removal Capacity --- p.60 / Chapter 4.5.5 --- Effect of Anions on Copper Removal Capacity --- p.60 / Chapter 4.6 --- Copper Removal by Immobilized Cells of Pseudomonas putida 5-X --- p.60 / Chapter 4.6.1 --- Copper Removal Capacity of Immobilized Cells and Breakthrough Curve for Copper Removal --- p.60 / Chapter 4.6.2 --- Effect of Retention Time on Copper Removal Capacity of Immobilized Cells --- p.65 / Chapter 4.6.3 --- Efficiency of Copper Recovery from Immobilized Cells by Various Eluants --- p.65 / Chapter 4.6.4 --- Performance of Immobilized Cells on Multiple Copper Loading-elution Cycles --- p.65 / Chapter 4.6.5 --- Treatment of Effluent from an Electroplating Factory by Immobilized Cells --- p.65 / Chapter 5. --- Discussion --- p.72 / Chapter 5.1 --- Screening of Bacteria for Copper Removal Capacity --- p.72 / Chapter 5.2 --- Effect of Culture Conditions on Copper Removal Capacity of Pseudomonas putida 5-X --- p.73 / Chapter 5.2.1 --- Effect of Nutrient Limitation --- p.73 / Chapter 5.2.2 --- Effect of Incubation Temperature and Culture Age --- p.74 / Chapter 5.3 --- Determination of Copper Uptake Mechanism of Pseudomonas putida 5-X --- p.75 / Chapter 5.3.1 --- Effect of Glucose and Sodium Azide on Copper Removal Capacity --- p.75 / Chapter 5.3.2 --- Transmission Electron Micrograph of Pseudomonas putida 5-X after Copper Uptake --- p.75 / Chapter 5.4 --- Effect of Pretreatment of Cells on Copper Removal Capacity of Pseudomonas putida 5-X --- p.76 / Chapter 5.5 --- Physico-chemical Characterization of Pseudomonas putida 5-X as Biosorbent for Copper Removal --- p.77 / Chapter 5.5.1 --- Copper Uptake Kinetics --- p.77 / Chapter 5.5.2 --- Freundlich Isotherm for Copper Uptake --- p.78 / Chapter 5.5.3 --- Effect of pH on Copper Removal Capacity --- p.78 / Chapter 5.5.4 --- Effect of Metal Ions on Copper Removal Capacity --- p.79 / Chapter 5.5.5 --- Effect of Anions on Copper Removal Capacity --- p.80 / Chapter 5.6 --- Copper Removal by Immobilized Cells of Pseudomonas putida 5-X --- p.80 / Chapter 5.6.1 --- Copper Removal Capacity of Immobilized Cells and Breakthrough Curve for Copper Removal --- p.80 / Chapter 5.6.2 --- Effect of Retention Time on Copper Removal Capacity of Immobilized Cells --- p.82 / Chapter 5.6.3 --- Efficiency of Copper Recovery from Immobilized Cells by Various Eluants --- p.82 / Chapter 5.6.4 --- Performance of Immobilized Cells on Multiple Copper Loading-elution Cycles 的 --- p.83 / Chapter 5.6.5 --- Treatment of Effluent from an Electroplating Factory by Immobilized Cells --- p.84 / Chapter 6. --- Conclusion --- p.85 / Chapter 7. --- Summary --- p.87 / Chapter 8. --- References --- p.89
|
5 |
Removal and recovery of copper ion (Cu²⁽) from electroplating effluent by pseudomonas putida 5-X immobilized on magnetites.January 1996 (has links)
by Sze Kwok Fung Calvin. / Thesis (M.Phil.)--Chinese University of Hong Kong, 1996. / Includes bibliographical references (leaves 118-130). / Acknowledgement --- p.i / Abstract --- p.ii / Content --- p.iv / Chapter 1. --- Introduction --- p.1 / Chapter 1.1 --- Literature review --- p.1 / Chapter 1.1.1 --- Heavy metals in the environment --- p.1 / Chapter 1.1.2 --- Heavy metal pollution in Hong Kong --- p.2 / Chapter 1.1.3 --- Electroplating industry in Hong Kong --- p.6 / Chapter 1.1.4 --- Chemistry and toxicity of copper in the environment --- p.7 / Chapter 1.1.5 --- Methods of removal of heavy metal from industrial effluent --- p.9 / Chapter A. --- Physico-chemical methods --- p.9 / Chapter B. --- Biological methods --- p.9 / Chapter 1.1.6 --- Methods of recovery of heavy metal from metal-loaded biosorbent --- p.17 / Chapter 1.1.7 --- The physico-chemical properties of magnetites --- p.18 / Chapter 1.1.8 --- Magnetites for water and wastewater treatment --- p.19 / Chapter 1.1.9 --- Immobilized cell technology --- p.24 / Chapter 1.1.10 --- Stirrer-tank bioreactor --- p.26 / Chapter 1.2 --- Objectives of the present study --- p.28 / Chapter 2. --- Materials and Methods --- p.30 / Chapter 2.1 --- Selection of copper-resistant bacteria --- p.30 / Chapter 2.2 --- Culture media and chemicals --- p.30 / Chapter 2.3 --- Growth of the bacterial cells --- p.32 / Chapter 2.4 --- Immobilization of the bacterial cells on magnetites --- p.32 / Chapter 2.4.1 --- Effects of physical and chemical factors on the immobilization of the bacterial cells on magnetites --- p.34 / Chapter 2.4.2 --- Effects of pH on the desorption of bacterial cells from magnetites --- p.34 / Chapter 2.5 --- Copper ion uptake experiments --- p.35 / Chapter 2.6 --- Effects of physico-chemical and operational factors on the Cu2+ removal capacity of the magnetite-immobilized bacterial cells --- p.35 / Chapter 2.7 --- Transmission electron micrograph and scanning electron micrograph of Pseudomonas putida 5-X loaded with Cu2+ --- p.36 / Chapter 2.7.1 --- Transmission electron micrograph --- p.36 / Chapter 2.7.2 --- Scanning electron micrograph --- p.37 / Chapter 2.8 --- Copper ion adsorption isotherm of the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.37 / Chapter 2.9 --- Recovery of adsorbed Cu2+ from the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.38 / Chapter 2.9.1 --- Effects of eluents on the Cu2+ removal and recovery capacity of the magnetite-immobilized cells --- p.38 / Chapter 2.9.2 --- Batch type multiple adsorption-desorption cycles of Cu2+ using ethylenediaminetetra-acetic acid (EDTA) --- p.39 / Chapter 2.10 --- Removal and recovery of Cu2+ from the electroplating effluent by a bioreactor --- p.39 / Chapter 2.10.1 --- Batch type multiple adsorption-desorption cycles using the copper solution and electroplating effluent --- p.39 / Chapter 2.10.2 --- Continuous type bioreactor to remove and recover Cu2+ from copper solution and electroplating effluent --- p.40 / Chapter 2.11 --- Statistical analysis of data --- p.43 / Chapter 3. --- Results --- p.44 / Chapter 3.1 --- Effects of physical and chemical factors on the immobilization of the bacterial cells on magnetites --- p.44 / Chapter 3.1.1 --- Effects of cells to magnetites ratio --- p.44 / Chapter 3.1.2 --- Effects of pH --- p.44 / Chapter 3.1.3 --- Effects of temperature --- p.44 / Chapter 3.2 --- Effects of pH on the desorption of bacterial cells from magnetites --- p.49 / Chapter 3.3 --- Copper ion uptake experiments --- p.49 / Chapter 3.4 --- Effects of physico-chemical and operational factors on the Cu2+ removal capacity of the magnetite-immobilized bacterial cells --- p.49 / Chapter 3.4.1 --- Effects of pH --- p.49 / Chapter 3.4.2 --- Effects of temperature --- p.53 / Chapter 3.4.3 --- Effects of retention time --- p.53 / Chapter 3.4.4 --- Effects of cations --- p.53 / Chapter 3.4.5 --- Effects of anions --- p.57 / Chapter 3.5 --- Transmission electron micrograph of Pseudomonas putida 5-X loaded with Cu2+ --- p.62 / Chapter 3.6 --- Scanning electron micrograph of Pseudomonas putida 5-X loaded with Cu2+ --- p.62 / Chapter 3.7 --- Copper ion adsorption isotherm of the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.68 / Chapter 3.8 --- Recovery of adsorbed Cu2+ from the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.68 / Chapter 3.8.1 --- Effects of eluents on the Cu2+ removal and recovery capacity of the magnetite-immobilized cells --- p.68 / Chapter 3.8.2 --- Batch type multiple adsorption-desorption cycles of Cu2+ using ethylenediaminetetra-acetic acid (EDTA) --- p.74 / Chapter 3.9 --- Removal and recovery of Cu2+ from the electroplating effluent by a bioreactor --- p.74 / Chapter 3.9.1 --- Batch type multiple adsorption-desorption cycles using the copper solution and electroplating effluent --- p.74 / Chapter 3.9.2 --- Continuous type bioreactor to remove and recover Cu2+ from copper solution and electroplating effluent --- p.81 / Chapter 4. --- Discussion --- p.89 / Chapter 4.1 --- Selection of copper-resistant bacteria --- p.89 / Chapter 4.2 --- Effects of physical and chemical factors on the immobilization of the bacterial cells on magnetites --- p.89 / Chapter 4.2.1 --- Effects of cells to magnetites ratio --- p.89 / Chapter 4.2.2 --- Effects of pH --- p.90 / Chapter 4.2.3 --- Effects of temperature --- p.91 / Chapter 4.2.4 --- Effects of pH on the desorption of bacterial cells from magnetites --- p.92 / Chapter 4.3 --- Copper ion uptake experiments --- p.93 / Chapter 4.4 --- Effects of physico-chemical and operational factors on the Cu2+ removal capacity of the magnetite-immobilized bacterial cells --- p.94 / Chapter 4.4.1 --- Effects of pH --- p.95 / Chapter 4.4.2 --- Effects of temperature --- p.96 / Chapter 4.4.3 --- Effects of retention time --- p.97 / Chapter 4.4.4 --- Effects of cations --- p.98 / Chapter 4.4.5 --- Effects of anions --- p.101 / Chapter 4.5 --- Transmission electron micrograph of Pseudomonas putida 5-X loaded with Cu2+ --- p.101 / Chapter 4.6 --- Scanning electron micrograph of Pseudomonas putida 5-X loaded with Cu2+ --- p.102 / Chapter 4.7 --- Copper ion adsorption isotherm of the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.103 / Chapter 4.8 --- Recovery of adsorbed Cu2+ from the magnetite-immobilized cells of Pseudomonas putida 5-X --- p.104 / Chapter 4.8.1 --- Effects of eluents on the Cu2+ removal and recovery capacity of the magnetite-immobilized cells --- p.104 / Chapter 4.8.2 --- Batch type multiple adsorption-desorption cycles of Cu2+ using ethylenediaminetetra-acetic acid (EDTA) --- p.105 / Chapter 4.9 --- Removal and recovery of Cu2+ from the electroplating effluent by a bioreactor --- p.107 / Chapter 4.9.1 --- Batch type multiple adsorption-desorption cycles using the copper solution and electroplating effluent --- p.107 / Chapter 4.9.2 --- Continuous type bioreactor to remove and recover Cu2+ from copper solution and electroplating effluent --- p.108 / Chapter 5. --- Conclusion --- p.110 / Chapter 6. --- Summary --- p.112 / Chapter 7. --- References --- p.115
|
Page generated in 0.3808 seconds