The objective of the work reported in this thesis was to design and implement an ecological effects environmental monitoring program which would: 1) Collect baseline biological information on sessile epibiotic fouling communities from an area adjacent to a petroleum refinery located on Corio Bay, Victoria, to allow comparison with results of future monitoring for the assessment of long term temporal water quality trends. 2) Detect and — if possible - estimate the magnitude of any influence on epibiotic fouling communities within the Corio Bay marine ecosystem attributable to operations at the Shell Petroleum Refinery. 3) Investigate the extent of thermal stratification and rate of dispersal of the petroleum refinery main cooling-water outfall plume (discharging up to 350,000 tonnes of warmed seawater per day), and its effect on epibiotic communities within the EPA-defined mixing zone. A major component of the work undertaken was the design and development of artificial-substrate biological sampling stations suitable for use under the conditions prevailing in Corio Bay, and the development of appropriate quantitative underwater photographic sampling techniques to fulfil the experimental criteria outlined above. Experimental and other constraints imposed on the design of the stations precluded the simple suspension of frames from jetties or pylons, a technique widely used in previous work of this type. Artificial substrate panels were deployed along three radial transects centred within and extending beyond the petroleum refinery main cooling-water mixing zone. Identical substrate panels were deployed at a number of control sites located throughout Corio Bay, each chosen for differences in their degree of exposure to such factors as water movement, depth, shipping traffic and/or comparable industrial activity. The rate of colonisation (space utilisation) and the development of epibiotic fouling communities on artificial substrate panels was monitored over two twelve-month sampling periods using quantitative underwater photographic sampling techniques. Sampling was conducted at 4-8 week intervals with the rate of panel colonisation and community structure determined via coverage measurements. Various species of marine algae, polychaete tubeworms, hydroids, barnacles, simple and colonial ascidians, sponges, bivalve molluscs and encrusting bryozoans were all detected growing on panels. Communities which established on panels within the cooling-water mixing-zone and those at control sites were compared using statistical procedures including agglomerative hierarchical cluster analysis. A photographic sample archive has been established to allow comparison with similar future studies.