This master thesis discusses about designing and realization of a control system for a 6-axis robotic arm. The controlling system consist in a microcontroller LPC1756 with its firmware implemented under the Real-time operating system FreeRTOS and GUI application, running on a PC. The Microcontroller communicates with the PC through a serial line via SLIP protocol. Theoretically, it will deal with an explanation of the important terms, and describes the used robotic arm and its controlling unit. The practical part describes kinematics problems solving, firmware’s realization and GUI application.

This thesis is focused on a firmware for robotic vehicle based on the ARM Cortex-M3 architecture that is running a real-time operating system (RTOS). Theoretical part describes available solutions of embedded RTOS and concrete HW implementation of the robotic vehicle. There is also comparison of the three selected RTOS with their measurements. Result of this thesis is base firmware compounded by a program modules that controls HW parts. There is also a sample PC and firmware application that extends base firmware. This sample application is able to communicate with robotic vehicle, control wheel motion and measure process data.

This thesis deals with an electronic circuit and a PCB of a modular RGB LED display with the Ehernet interface. Firstly, author describes a RGB colour model, features of RGB LED displays, ways of control them. The next chapter contains a short description of the Ethernet interface, UDP and TCP protocols and a lwIP TCP/IP stack. The last theoretical chapter is an introduction to ARM Cortex-M3 and Cortex-M4 based microcontrollers. The next chaper is deals with a hardware design of the modular RGB LED display. The device is designed to be modular. Individual devices can be combosed together and create a larger display. Data from the Ethernet interface will be displayed on the RGB LED matrix, resolution of the matrix is 32 × 32 (1024 diodes). A refresh frequency is 100 Hz, a color depth is High color (16 bits) and a scanning 1/16 (two rows is driven at the same time). The next chapter describes the firmware for the RGB LED display, all its logical parts including a web page. Author also created the PC application, which sends pictures using UDP protocol to individual modules.

This thesis describes playing draughts game by 6 axis manipulator Lynxmotion AL5D controlled by ARM Cortex M3 MCU. It involves algorithms for image recognition, artificial intelligence and algorithms for controlling 6 axis manipulator in real-time.