Recently, indoor localization becomes a hot topic no matter in industry or academic field. Smart phones are good candidates for localization since they are carrying various sensors such as GPS, Wi-Fi, accelerometer, barometer and etc, which can be used to estimate the current location. But there are still many challenges for 3D indoor geolocation using smart phones, among which the map selection and 3D performance evaluation problems are the most common and crucial. In the indoor environment, the popular outdoor Google maps cannot be utilized since we need maps showing the layout of every individual floor. Also, layout of different floors differ from one another. Therefore, algorithms are required to detect whether we are inside or outside a building and determine on which floor we are located so that an appropriate map can be selected accordingly. For Wi-Fi based indoor localization, the performance of location estimation is closely related to the algorithms and deployment that we are using. It is difficult to find out a general approach that can be used to evaluate any localization system. On one hand, since the RF signal will suffer extra loss when traveling through the ceilings between floors, its propagation property will be different from the empirical ones and consequently we should design a new propagation model for 3D scenarios. On the other hand, properties of sensors are unique so that corresponding models are required before we analyze the localization scheme. In-depth investigation on the possible hybrid are also needed in case more than one sensor is operated in the localization system. In this thesis, we firstly designed two algorithms to use GPS signal for detecting whether the smart device is operating inside or outside a building, which is called outdoor-indoor transition detection. We also design another algorithm to use barometer data for determining on which floor are we located, which is considered as a multi-floor transition detection. With three scenarios designed inside the Akwater Kent Laboratory building (AK building) at Worcester Polytechnic Institute (WPI), we collected raw data from an Android phone with a version of 4.3 and conducted experimental analysis based on that. An efficient way to quantitatively evaluate the 3D localization systems is using Cramer-Rao Lower Bound (CRLB), which is considered as the lower bound of the estimated error for any localization system. The characteristics of Wi-Fi and barometer signals are explored and proper models are introduced as a foundation. Then we extended the 2D CRLB into a 3D format so that it can fit the our 3D scenarios. A barometer-assisted CRLB is introduced as an improvement for the existing Wi-Fi Receive Signal Strength (RSS)-only scheme and both of the two schemes are compared with the contours in every scenario and the statistical analysis.

The past two decades have seen a surge in the number of applications requiring precise positioning data. Modern cellular networks offer many services based on the user's location, such as emergency services (e.g., E911), and emerging wireless sensor networks are being used in applications spanning environmental monitoring, precision agriculture, warehouse and manufacturing logistics, and traffic monitoring, just to name a few. In these sensor networks in particular, obtaining precise positioning data of the sensors gives vital context to the measurements being reported. While the Global Positioning System (GPS) has traditionally been used to obtain this positioning data, the deployment locations of these cellular and sensor networks in GPS-constrained environments (e.g., cities, indoors, etc.), along with the need for reliable positioning, requires a localization scheme that does not rely solely on GPS. This has lead to localization being performed entirely by the network infrastructure itself, or by the network infrastructure aided, in part, by GPS. In the literature, benchmarking localization performance in these networks has traditionally been done in a deterministic manner. That is, for a fixed setup of anchors (nodes with known location) and a target (a node with unknown location) a commonly used benchmark for localization error, such as the Cramer-Rao lower bound (CRLB), can be calculated for a given localization strategy, e.g., time-of-arrival (TOA), angle-of-arrival (AOA), etc. While this CRLB calculation provides excellent insight into expected localization performance, its traditional treatment as a deterministic value for a specific setup is limited. Rather than trying to gain insight into a specific setup, network designers are more often interested in aggregate localization error statistics within the network as a whole. Questions such as: "What percentage of the time is localization error less than x meters in the network?" are commonplace. In order to answer these types of questions, network designers often turn to simulations; however, these come with many drawbacks, such as lengthy execution times and the inability to provide fundamental insights due to their inherent ``block box'' nature. Thus, this dissertation presents the first analytical solution with which to answer these questions. By leveraging tools from stochastic geometry, anchor positions and potential target positions can be modeled by Poisson point processes (PPPs). This allows for the CRLB of position error to be characterized over all setups of anchor positions and potential target positions realizable within the network. This leads to a distribution of the CRLB, which can completely characterize localization error experienced by a target within the network, and can consequently be used to answer questions regarding network-wide localization performance. The particular CRLB distribution derived in this dissertation is for fourth-generation (4G) and fifth-generation (5G) sub-6GHz networks employing a TOA localization strategy. Recognizing the tremendous potential that stochastic geometry has in gaining new insight into localization, this dissertation continues by further exploring the union of these two fields. First, the concept of localizability, which is the probability that a mobile is able to obtain an unambiguous position estimate, is explored in a 5G, millimeter wave (mm-wave) framework. In this framework, unambiguous single-anchor localization is possible with either a line-of-sight (LOS) path between the anchor and mobile or, if blocked, then via at least two NLOS paths. Thus, for a single anchor-mobile pair in a 5G, mm-wave network, this dissertation derives the mobile's localizability over all environmental realizations this anchor-mobile pair is likely to experience in the network. This is done by: (1) utilizing the Boolean model from stochastic geometry, which statistically characterizes the random positions, sizes, and orientations of reflectors (e.g., buildings) in the environment, (2) considering the availability of first-order (i.e., single-bounce) reflections as well as the LOS path, and (3) considering the possibility that reflectors can either facilitate or block reflections. In addition to the derivation of the mobile's localizability, this analysis also reveals that unambiguous localization, via reflected NLOS signals exclusively, is a relatively small contributor to the mobile's overall localizability. Lastly, using this first-order reflection framework developed under the Boolean model, this dissertation then statistically characterizes the NLOS bias present on range measurements. This NLOS bias is a common phenomenon that arises when trying to measure the distance between two nodes via the time delay of a transmitted signal. If the LOS path is blocked, then the extra distance that the signal must travel to the receiver, in excess of the LOS path, is termed the NLOS bias. Due to the random nature of the propagation environment, the NLOS bias is a random variable, and as such, its distribution is sought. As before, assuming NLOS propagation is due to first-order reflections, and that reflectors can either facilitate or block reflections, the distribution of the path length (i.e., absolute time delay) of the first-arriving multipath component (MPC) is derived. This result is then used to obtain the first NLOS bias distribution in the localization literature that is based on the absolute delay of the first-arriving MPC for outdoor time-of-flight (TOF) range measurements. This distribution is shown to match exceptionally well with commonly assumed gamma and exponential NLOS bias models in the literature, which were only attained previously through heuristic or indirect methods. Finally, the flexibility of this analytical framework is utilized by further deriving the angle-of-arrival (AOA) distribution of the first-arriving MPC at the mobile. This distribution gives novel insight into how environmental obstacles affect the AOA and also represents the first AOA distribution, of any kind, derived under the Boolean model. In summary, this dissertation uses the analytical tools offered by stochastic geometry to gain new insights into localization metrics by performing analyses over the entire ensemble of infrastructure or environmental realizations that a target is likely to experience in a network. / Doctor of Philosophy / The past two decades have seen a surge in the number of applications requiring precise positioning data. Modern cellular networks offer many services based on the user's location, such as emergency services (e.g., E911), and emerging wireless sensor networks are being used in applications spanning environmental monitoring, precision agriculture, warehouse and manufacturing logistics, and traffic monitoring, just to name a few. In these sensor networks in particular, obtaining precise positioning data of the sensors gives vital context to the measurements being reported. While the Global Positioning System (GPS) has traditionally been used to obtain this positioning data, the deployment locations of these cellular and sensor networks in GPS-constrained environments (e.g., cities, indoors, etc.), along with the need for reliable positioning, requires a localization scheme that does not rely solely on GPS. This has lead to localization being performed entirely by the network infrastructure itself, or by the network infrastructure aided, in part, by GPS. When speaking in terms of localization, the network infrastructure consists of what are called anchors, which are simply nodes (points) with a known location. These can be base stations, WiFi access points, or designated sensor nodes, depending on the network. In trying to determine the position of a target (i.e., a user, or a mobile), various measurements can be made between this target and the anchor nodes in close proximity. These measurements are typically distance (range) measurements or angle (bearing) measurements. Localization algorithms then process these measurements to obtain an estimate of the target position. The performance of a given localization algorithm (i.e., estimator) is typically evaluated by examining the distance, in meters, between the position estimates it produces vs. the actual (true) target position. This is called the positioning error of the estimator. There are various benchmarks that bound the best (lowest) error that these algorithms can hope to achieve; however, these benchmarks depend on the particular setup of anchors and the target. The benchmark of localization error considered in this dissertation is the Cramer-Rao lower bound (CRLB). To determine how this benchmark of localization error behaves over the entire network, all of the various setups of anchors and the target that would arise in the network must be considered. Thus, this dissertation uses a field of statistics called stochastic geometry} to model all of these random placements of anchors and the target, which represent all the setups that can be experienced in the network. Under this model, the probability distribution of this localization error benchmark across the entirety of the network is then derived. This distribution allows network designers to examine localization performance in the network as a whole, rather than just for a specific setup, and allows one to obtain answers to questions such as: "What percentage of the time is localization error less than x meters in the network?" Next, this dissertation examines a concept called localizability, which is the probability that a target can obtain a unique position estimate. Oftentimes localization algorithms can produce position estimates that congregate around different potential target positions, and thus, it is important to know when algorithms will produce estimates that congregate around a unique (single) potential target position; hence the importance of localizability. In fifth generation (5G), millimeter wave (mm-wave) networks, only one anchor is needed to produce a unique target position estimate if the line-of-sight (LOS) path between the anchor and the target is unimpeded. If the LOS path is impeded, then a unique target position can still be obtained if two or more non-line-of-sight (NLOS) paths are available. Thus, over all possible environmental realizations likely to be experienced in the network by this single anchor-mobile pair, this dissertation derives the mobile's localizability, or in this case, the probability the LOS path or at least two NLOS paths are available. This is done by utilizing another analytical tool from stochastic geometry known as the Boolean model, which statistically characterizes the random positions, sizes, and orientations of reflectors (e.g., buildings) in the environment. Under this model, considering the availability of first-order (i.e., single-bounce) reflections as well as the LOS path, and considering the possibility that reflectors can either facilitate or block reflections, the mobile's localizability is derived. This result reveals the roles that the LOS path and the NLOS paths play in obtaining a unique position estimate of the target. Using this first-order reflection framework developed under the Boolean model, this dissertation then statistically characterizes the NLOS bias present on range measurements. This NLOS bias is a common phenomenon that arises when trying to measure the distance between two nodes via the time-of-flight (TOF) of a transmitted signal. If the LOS path is blocked, then the extra distance that the signal must travel to the receiver, in excess of the LOS path, is termed the NLOS bias. As before, assuming NLOS propagation is due to first-order reflections and that reflectors can either facilitate or block reflections, the distribution of the path length (i.e., absolute time delay) of the first-arriving multipath component (MPC) (or first-arriving ``reflection path'') is derived. This result is then used to obtain the first NLOS bias distribution in the localization literature that is based on the absolute delay of the first-arriving MPC for outdoor TOF range measurements. This distribution is shown to match exceptionally well with commonly assumed NLOS bias distributions in the literature, which were only attained previously through heuristic or indirect methods. Finally, the flexibility of this analytical framework is utilized by further deriving angle-of-arrival (AOA) distribution of the first-arriving MPC at the mobile. This distribution yields the probability that, for a specific angle, the first-arriving reflection path arrives at the mobile at this angle. This distribution gives novel insight into how environmental obstacles affect the AOA and also represents the first AOA distribution, of any kind, derived under the Boolean model. In summary, this dissertation uses the analytical tools offered by stochastic geometry to gain new insights into localization metrics by performing analyses over all of the possible infrastructure or environmental realizations that a target is likely to experience in a network.

We consider time-of-arrival based robust geolocation in harsh line-of-sight/non-line-of-sight environments. Herein, we assume the probability density function (PDF) of the measurement error to be completely unknown and develop an iterative algorithm for robust position estimation. The iterative algorithm alternates between a PDF estimation step, which approximates the exact measurement error PDF (albeit unknown) under the current parameter estimate via adaptive kernel density estimation, and a parameter estimation step, which resolves a position estimate from the approximate log-likelihood function via a quasi-Newton method. Unless the convergence condition is satisfied, the resolved position estimate is then used to refine the PDF estimation in the next iteration. We also present the best achievable geolocation accuracy in terms of the Cramér-Rao lower bound. Various simulations have been conducted in both real-world and simulated scenarios. When the number of received range measurements is large, the new proposed position estimator attains the performance of the maximum likelihood estimator (MLE). When the number of range measurements is small, it deviates from the MLE, but still outperforms several salient robust estimators in terms of geolocation accuracy, which comes at the cost of higher computational complexity.

This project is associated with statistical methods to find the unknown parameters of a model. It is the statistical investigation of the algorithm with respect to accuracy (the Cramer-Rao bound and L-curve technique) and optimization of the algorithmic parameters. This project aims to estimate the true temperature (final temperature) of a certain liquid in a container by using initial measurements (readings) from a temperature probe with a known time constant. Basically, the final temperature of the liquid was estimated, before the probe reached its final reading. The probe obeys a simple first-order differential equation model. Based on the model of the probe and the measurement data the estimate was calculated of the ’true’ temperature in the container by using a maximum likelihood approach to parameter estimation.  The initial temperature was also investigated. Modelling, analysis, calculations, and simulations of this problem were explored.