This dissertation addresses the design, simulation, prototype, and test of a new energy generation system, which transforms rotational motion into electricity by the use of an innovative turbine-generator. The system is divided in two assembled subsystems that interact to finally transform kinetic energy into electricity. The first subsystem is a miniaturized notched impulse turbine system, and the second one is a millimeter permanent magnet generator (PMG) assembled into the turbine. The conversion of biomechanical energy to electric energy, using clean and free energy produced by a living organism, is being increasingly researched [1]-[11]. These are all viable options, but advantages and disadvantages of each type of energy conversions should be evaluated individually to determine key factors such as efficiency as an energy harvesting method, the implementation cost, size, and the final applications where they will be used. Through this dissertation, a new option of green energy conversion is made available; focusing on the use of turbines to extract energy from microfluidics, with diverse application in biomedical, military/aerospace, and home areas. These systems have the potential of converting mechanical movement energy, and hydraulic energy into electric energy that may be sufficient for self-powering nano/micro devices and nano/micro systems. A flow, with constant pressure, a magnetic generator, and a novel impulse turbine design are combined to form a self-contained miniaturized generator system. The turbine consists of two main parts: a bearingless rotor and the enclosure or casing; while the miniaturized magnetic generator is a permanent magnet brushless machine, consisting of permanent magnets in a ring configuration and radial coils. A permanent pressure, from microfluidic pressure system, is the force used to move the blades. This rotational motion of the turbine is transformed into electricity using magnetic induction, formed by permanent magnets on the rotor and nine coils fixed in the holder of the turbine. The electricity is generated when the magnetic field rotates and moves past the conductor, which induces a current according to Faraday's Law [1-3]. The system has potential uses not only in medical equipment, but in automotive applications, home appliances, and aquatic and ventilation systems.

L'étude développée dans cette thèse concerne le contrôle des performances et des lâchers tourbillonnaires au cours du cycle de rotation d'une hydrolienne à axe vertical de type Darrieus. L'élaboration d'une famille de lois de commande d'incidence de pales exploitant le principe de conservation de la circulation autour de profils en mouvement permet ici le contrôle du fonctionnement de l'hydrolienne ainsi que la maîtrise de son sillage tourbillonnaire afin de préserver l'environnement.L'écoulement 2D est simulé à l'aide du solveur incompressible de Star CCM+ afin de mettre en évidence l'effet de ce type de contrôle sur le rendement de la turbine pour différents points de fonctionnement. Ce modèle CFD a été utilisé pour améliorer l'analyse analytique en ce qui concerne l'extraction de l'énergie, la compréhension de l'écoulement autour de l'hydrolienne et le contrôle des tourbillons générés. La nouveauté de cette étude est l'élaboration de lois de commande de pales d'hydrolienne, basées sur des valeurs constantes et transitoires de la circulation, afin d'augmenter la puissance de la turbine tout en garantissant un contrôle efficace de la vorticité et ainsi prévenir de l'interaction entre les tourbillons et les pales. Une bonne comparaison est réalisée entre les résultats analytiques et numériques concernant les forces hydrodynamiques.En outre, une campagne d'essais a été menée afin d'acquérir des mesures quantitatives sur une hydrolienne de type Darrieus à pales fixes en terme de puissance, mais aussi des résultats qualitatifs pertinents comme la visualisation de l'écoulement autour des pales à différentes positions et pour différents points de fonctionnement. La mise en place complète d'un système PTV pour les mesures qualitatives et les étapes de traitement sont discutées et les divers paramètres obtenus à partir des études CFD sont validées en utilisant ces résultats PIV.L'étude expérimentale dans la présente recherche appo11e des informations détaillées sur les gradients de pression et de vitesse, les contours de vorticité et le critère Q qui ont servi à valider les visualisations obtenues numériquement. / With key applications in marine renewable energy. the vertical axis water turbine can use current or tidal energy in an eco-friendly manner. However, it is difficult to reconcile optimal performance of hydrokinetic turbines and compliance wilh the aquatic environment as the main drawback of the turbines is the formation of non-linear flow structures caused by the unsteady movement of the blades. Eddies in the flow are advected and can interact with other blades, which leads to a reduction in power output. To limit this phenomenon, the turbines operate at high speeds, which are likely to reduce the shaft power. High speeds of rotational so forbid the passage of aquatic animais, and are the cause of a suction effect on the sediments.The objective of this thesis work is twofold. First, it aims to develop a blade pitch control to get the flow adjusted around the blade profile at any given flow configuration by incorporatin.g the profile's motion with respect to incident flow. Such a system intends to achieve the objective of operating at reduced speeds without vortical releases, which should allow achieving a high torque without causing damage to the environment.This thesis work is mainly carried out in three phases. ln the first phase, the irrotational flow over an arbitrary profile is formulated using conforma] mapping. Prospective potential flow application on the basis of Couchet theory (1976) is involved in the development of a control law that decides the blade pitching in a constant circulation framework. In the second phase, a numerical validation of the developed analytical work is presented using CFD to examine how the theoretical fomulation can be effectively applied to Darricus turbines. In the final phase, two prototypes are developed, one is classical Darrieus turbine with fixed blades, and other is the turbine with pitching blades for experimental measurements of performance as well as flow fields(by PIV) in order to validate the computational results.