Abstract Ammonia is one of valuable chemicals which are commonly used in various industrial factors. It is also a typical pollutant, and has a long-term impact on human health for toxicity characteristics. This study was to investigate the performance, product selectivity and kinetics in oxidation of ammonia solution in WAO process over Cu/ACF catalyst. The operation parameters in continuous WAO process were performed as follows: initial concentration of ammonia in ranging from 200 ppm to 1000 ppm, pH at 12, velocity of influent at below 3.0 ml/min, temperature ranging from 443K to 463K and pressure at 3.0 MPa. In the experiments of catalyst selection, we decided to use 5% Cu/ACF catalyst for its high conversion and selectivity in oxidation of ammonia. A conversion of 95.42% in oxidation of ammonia was achieved under 463K and the product selectivity of N2 was raised from 53% to 85%. We found that Cu/ACF and ACF catalysts both had the good conversion and selectivity in oxidation of ammonia in WAO process. In the long-term test of catalyst stability, Cu/ACF had a bad stability after 48 hours reaction in WAO process. The tests such as XRD, SEM and EA were also determined. The kinetics of WAO over Cu/ACF catalyst in oxidation of ammonia using Power-Rate Law was presented. The apparent reaction order and activated energy were obtained.